Monte carlo model and output factors of elekta infinity™ 6 and 10 MV photon beam

AimThis study aimed to commission the Elekta Infinity™ working in 6 and 10 MV photon beam installed in Concord International Hospital, Singapore, and compare the OFs between MC simulation and measurement using PTW semiflex and microDiamond detector for small field sizes.Material and MethodsThere are two main steps in this study: modelling of Linac 6 and 10 MV photon beam and analysis of the output factors for field size 2 × 2–10 × 10 cm². The EGSnrc/BEAMnrc-DOSXYZnrc code was used to model and characterize the Linac and to calculate the dose distributions in a water phantom. The dose distribution and OFs were compared to the measurement data in the same condition.ResultsThe commissioning process was only conducted for a 10 × 10 cm² field size. The PDD obtained from MC simulation showed a good agreement with the measurement. The local dose difference of PDDs was less than 2% for 6 and 10 MV. The initial electron energy was 5.2 and 9.4 MeV for 6 and 10 MV photon beam, respectively. This Linac model can be used for dose calculation in other situations and different field sizes because this Linac has been commissioned and validated using Monte Carlo simulation. The 10 MV Linac produces higher electron contamination than that of 6 MV.ConclusionsThe Linac model in this study was acceptable. The most important result in this work comes from OFs resulted from MC calculation. This value was more significant than the OFs from measurement using semiflex and microDiamond for all beam energy and field sizes because of the CPE phenomenon.     

Conversion factors for effective dose and organ doses with the air kerma area product in patients undergoing percutaneous transhepatic biliary drainage and trans arterial chemoembolization

Conversion factors used to estimate effective (E) and organ doses (H_T) from air Kerma area product (KAP) are required to estimate population doses in percutaneous transhepatic biliary drainage (PTBD) and trans arterial chemoembolization (TACE) interventional procedures.In this study, E and H_T for ten critical organs/tissues, were derived in 64 PTBD and 48 TACE procedures and in 14,540 irradiation events from dosimetric, technical and geometrical information included in the radiation dose structured report using the PCXMC Monte Carlo model, and the ICRP 103 organ weighting factors. Conversion factors of: 0.13; 0.19; 0.26 and 0.32 mSv Gy⁻¹ cm⁻² were established for irradiation events characterized by a Cu filtration of 0.0; 0.1; 0.4 and 0.9 mm, respectively. While a single coefficient of conversion is not able to provide estimates of E with enough accuracy, a high agreement is obtained between E estimated through Monte Carlo methods and E estimated through E/KAP conversion factors accounting separately for the different modes of fluoroscopy and the fluorography component of the procedures.An algorithm for the estimation of effective and organ doses from KAP has been established in biliary procedures which considers the Cu filtration in the X-ray irradiation events. A similar algorithm could be easily extended to other interventional procedures and incorporated in radiation dose monitoring systems to provide dosimetric estimates automatically with enough accuracy to assess population doses.     

Potential of restored gravel pits to provide suitable habitats for Eurasian otters in anthropogenic landscapes

In anthropogenic landscapes, which are usually characterized by the existence of highly heterogeneous patchworks of habitats with different conservation status, restored gravel pits have the potential to play a conservation role for semiaquatic species such as Eurasian otters (Lutra lutra). Here, we report an otter habitat suitability analysis on a complex fluvial system in an anthropogenic landscape to understand the role of different artificial water bodies (i.e. irrigation channels and ditches) and natural water bodies (i.e. rivers) related to a restored gravel pit lagoon system as providers of suitable habitats for otters. We implemented seven sampling campaigns during 2016 and 2017 consisting of 19 transects across all existing types of water bodies. We integrated 34 environmental variables with otter habitat use, measured by three spraint marking intensity indicators. We found that otter use of water bodies was not related to the natural or artificial origin of the water. Three key factors influenced habitat suitability: riparian vegetation tree cover, forestland use (either natural or planted) within 100 m from the banks, and the level of human disturbance. Our results suggest that otters' tolerance of human activities might be lower in key areas of their territory compared to areas they pass through or explore. We argue that restored gravel pit lagoon systems can potentially play a role in providing suitable habitats for otters in anthropogenic landscapes.     

Molecularly imprinted polymers—A closer look at the control polymer used in determining the imprinting effect: A mini review

Molecular recognition displayed by naturally occurring receptors has continued to inspire new innovations aimed at developing systems that can mimic this natural phenomenon. Since 1930s, a technology called molecular imprinting for producing biomimetic receptors has been in place. In this technology, tailor made binding sites that selectively bind a given target analyte (also called template) are incorporated in a polymer matrix by polymerizing functional monomers and cross‐linking monomers around a target analyte followed by removal of the analyte to leave behind cavities specific to the analyte. The success of the imprinting process is defined by two main figures of merit, that is, the imprinting factor, and selectivity, which are determined by comparing the amount of target analyte or structural analogue bound by the molecularly imprinted polymer (MIP) and the nonimprinted polymer (NIP). NIP is a control synthesized alongside the MIP but in the absence of the template. However, questions arise on whether these figures of merit are reliable measures of the imprinting effect because of the significant differences between the MIP and the NIP in terms of their physical and chemical characteristics. Therefore, this review critically looks into this subject, with a view of defining the best approaches for determining the imprinting effect.     

海南岛木麻黄林林下植物天然更新影响因素的研究

木麻黄海防林是海南岛重要的海岸生态屏障,天然更新对其持续发挥防护功能具有重要意义。调查发现海南岛大多数木麻黄林林下天然更新困难,然而却存在局部更新良好的现象。为了探究天然更新存在巨大差异的原因,并为促进海南海防林由人工林向近自然林转化提供一定的理论基础,通过分析不同林地更新质量的差异,研究影响木麻黄海防林林下天然更新的主要影响因素。该研究在海南岛木麻黄海防林中共设置73块临时样地,采用方差分析和相关分析等统计方法,分别研究林地所属气候区、林分条件、土壤因子和凋落物累积量对天然更新质量和密度的影响。结果表明:(1)湿润气候区的木麻黄林下更新要显著优于半干旱区;(2)木麻黄林分密度与更新密度和草本盖度存在显著负相关,但林分条件其他因子对更新影响不大;(3)不同更新质量样地的土壤pH和养分均无显著性差异,但铵态氮对幼苗、有机质对幼树的更新存在一定的促进作用;(4)凋落物的累计整体不利于天然更新的进行。结果说明气候因子、木麻黄林分密度、木麻黄凋落物积累量是木麻黄海防林林下植物天然更新的主要影响因素。     

木麻黄种子萌发的限制生态因子

成功的天然更新应同时具备三个条件:(1)种源数量充足、质量良好;(2)适宜种子萌发的微生境;(3)幼苗、幼树存活的生态条件。为进一步揭示海南岛木麻黄(Casuarina equisetifolia)海防林自身无法天然更新的障碍因子,该文对影响其天然更新的三个条件之一的种子萌发条件进行了研究,并探讨了不同的生态因子,如木麻黄化感、土壤酸碱度、盐度、温度、基质类型、水分等对木麻黄种子萌发的影响。结果表明:(1)不同浸提物的不同浸提液浓度处理的种子萌发率与CK组无显著性差异。(2)设定范围内的pH、盐度和温度对木麻黄种子萌发率无显著影响。(3)不同浓度梯度PEG溶液处理的木麻黄种子萌发率存在显著性差异,且伴随PEG溶液浓度增加,木麻黄种子萌发率随之锐减。(4)不同基质及浇水频度对种子萌发率也具有显著影响。从综合PEG干旱胁迫、基质及浇水频度的结果可以发现,木麻黄种子抗旱能力较弱,对水分敏感。因此,水分是制约木麻黄种子萌发的主要限制因子,凋落物层及滨海沙土较差的保水性不同程度地制约了种子的萌发。     

小叶锦鸡儿天然居群叶形态性状变异研究

为揭示小叶锦鸡儿(Caragana microphylla)天然居群叶形态性状的变异规律及其生态适应性特征,该研究以10个小叶锦鸡儿天然居群为对象,通过多重比较、巢式方差分析、相关性分析、聚类分析和主成分分析等方法,对7个叶形态性状进行分析。结果表明：(1)小叶锦鸡儿叶形态性状在居群内和居群间均存在极显著差异(P < 0.01),平均变异系数为10.13%,不同性状的变异幅度为6.23%~12.78%;平均叶形态性状的表型分化系数为43.62%,居群内变异(30.09%)大于居群间变异(24.91%),说明居群内是其叶形态性状变异的主要来源。(2)相关性分析表明,环境因子对小叶锦鸡儿的叶形态性状变异有很大的影响,在地理空间上主要呈现出沿海拔梯度的变异模式;主成分分析的结果显示,小叶宽、叶柄宽和叶柄长对小叶锦鸡儿叶形态变异起主导作用;利用欧式距离对小叶锦鸡儿居群进行UPGMA聚类分析结果显示,基于叶形态性状和环境因子可分别将小叶锦鸡儿10个居群分为3类和2类,Mantel检验结果表明,小叶锦鸡儿的叶形态性状变异不存在地理连续性。研究结果为小叶锦鸡儿的适应性进化和开发利用提供了理论依据。