响应面设计法优化单葡萄糖醛酸基甘草次酸（GAMG）发酵转化培养基

以甘草酸（dycyfrhizin,GL）为底物,利用产紫青霉（Penicillium purpurogenum Li-3）液态发酵转化单葡萄糖醛酸甘草次酸（GAMG）,采用响应面设计法对初始发酵培养基进行优化。用部分因子分析法研究原始发酵培养基各成分对响应值的显著程度,发现甘草酸（GL）、NaNO3和K2HPO4的质量浓度对发酵产生GAMG的影响显著（P〈0．01）。用中心组合设计确立甘草酸、NaNO3和K2HPO4的适宜质量浓度分别为2．8、3．0和0．8g／L。在优化条件下进行发酵时,GAMG的转化率从75．49％提高到89．11％,比优化前提高了13．62％。     

Surface plasmon resonance imaging analysis of hexahistidine-tagged protein on the gold thin film coated with a calix crown derivative

A surface plasmon resonance (SPR) imaging system was constructed and used to detect the hexahistidine-ubiquitin-tagged human parathyroid hormone fragment (His₆-Ub-hPTHF(1–34)) expressed inEscherichia coli. The hexahistidine-specific antibody was immobilized on a thin gold film coated with ProLinker^TM B, a novel calixcrown derivative with a bifunctional coupling property that permits efficient immobilization of capture proteins on solid matrices. The soluble and insoluble fractions of anE. coli cell lysate were spotted onto the antibody-coated gold chip, which was then washed with buffer (pH 7.4) solution and dried. SPR imaging measurements were carried out to detect the expressed His₆-Ub-hPTHF (1–34). There was no discernible protein image in the uninduced cell lysate, indicating that non-specific binding of contaminant proteins did not occur on the gold chip surface. It is expected that the approach used here to detect affinity-tagged recombinant proteins using an SPR imaging technique could be used as a powerful tool for the analyses of a number of proteins in a high-throughput mode.     

Radiation chemistry of a multicomponent aqueous system relevant to chemistry of cometary nuclei

Summary We have examined a water-dominated multicomponent system after irradiation in the multimegarad dose range with gamma rays from a⁶⁰Co source at both 77 and 310 K. The constituents were simple organic compounds in the proportions in which they appear in a dense interstellar cloud: HCN/CH₃OH/CH₃CN/C₂H₅CN/HCOOH=10.60.20.10.05. The total amounts were adjusted to correspond to a carbon to nitrogen ratio of 1.8 and a water content of about 50% in a cometary nucleus where the dust to volatiles ratio is 1; the total amount of CN-bearing compounds was taken to correspond to 0.4% of the cometary mass. In experiments at 310 K about 40 radiolytic products are identified, among them aldehydes and amino and carboxylic acids. Abundant polymeric material (M_w up to 80,000 daltons) is formed. The basic aspects of radiolysis of the liquid system are present also at 77 K, although at radiation-chemical yields that are lower by one to two orders of magnitude. We have considered the relevance of the present findings to the chemistry of a liquid-water core and the icy layers of a cometary nucleus.     

Feedback inhibition of ENaC: Acute and chronic mechanisms

Intracellular [Na⁺] ([Na⁺]_i) modulates the activity of the epithelial Na channel (ENaC) to help prevent cell swelling and regulate epithelial Na⁺ transport, but the underlying mechanisms remain unclear. We show here that short-term (60–80 min) incubation of ENaC-expressing oocytes in high Na⁺ results in a 75% decrease in channel activity. When the β subunit was truncated, corresponding to a gain-of-function mutation found in Liddle''s syndrome, the same maneuver reduced activity by 45% despite a larger increase in [Na⁺]_i. In both cases the inhibition occurred with little to no change in cell-surface expression of γENaC. Long-term incubation (18 hours) in high Na⁺ reduced activity by 92% and 75% in wild-type channels and Liddle''s mutant, respectively, with concomitant 70% and 52% decreases in cell-surface γENaC. In the presence of Brefeldin A to inhibit forward protein trafficking, high-Na⁺ incubation decreased wt ENaC activity by 52% and 88% after 4 and 8 hour incubations, respectively. Cleaved γENaC at the cell surface had lifetimes at the surface of 6 hrs in low Na⁺ and 4 hrs in high Na⁺, suggesting that [Na⁺]_i increased the rate of retrieval of cleaved γ ENaC by 50%. This implies that enhanced retrieval of ENaC channels at the cell surface accounts for part, but not all, of the downregulation of ENaC activity shown with chronic increases in [Na⁺]_i.     

The loss in hydrophobic surface area resulting from a Leu to Val mutation at the N-terminus of the aldehyde dehydrogenase presequence prevents import of the protein into mitochondria

An apparent conservative mutation, Leu to Val, at the second residue of the rat liver mitochondrial aldehyde dehydrogenase (ALDH) presequence resulted in a precursor protein that was not imported into mitochondria. Additional mutants were made to substitute various amino acids with nonpolar side chains for Leu2. The Ile, Phe, and Trp mutants were imported to an extent similar to that of the native precursor, but the Ala mutant was imported only about one-fourth as well. It was shown that the N-terminal methionine was removed from the L2V mutant in a reaction catalyzed by methionine aminopeptidase. The N-terminal methionine of native pALDH and the other mutant presequences was blocked, presumably by acetylation. Because of the difference in co-translational modification, the L2V mutant sustained a significant loss in the available hydrophobic surface of the presequence. Import competence was restored to the L2V mutant when it was translated using a system that did not remove Met1. The removal of an Arg-Gly-Pro helix linker segment (residues 11-14) from the L2V mutant, which shifted three leucine residues toward the N-terminus, also restored import competence. These results lead to the conclusion that a minimum amount of hydrophobic surface area near the N-termini of mitochondrial presequences is an essential property to determine their ability to be imported. As a result, both electrostatic and hydrophobic components must be considered when trying to understand the interactions between precursor proteins and proteins of the mitochondrial import apparatus.     

Mechanisms of transmembrane signalling in human T cell activation

Several monoclonal antibodies directed against a number of T cell surface molecules are used to elucidate the role of these molecules (cell surface molecules) in T cell activation. The activation of T cells via these molecules are both antigen-dependent (CD3/TcR complex) and antigen-independent. Irrespective of their antigen-dependency, these monoclonal antibodies activate T cells by a classical signal transduction pathway, in which the binding of monoclonal antibodies to their cell surface receptors leads to activation of phospholipase C resulting in the the depolarization of plasma membrane, hydrolysis of IP2 and IP3 and DAG, the second messengers. IP3 leads to mobilization of intracellular calcium to contribute to an increase in [Ca⁺⁺]_i, whereas DAG causes activation and translocation of PKC and an increasing apparent affinity for Ca⁺⁺. The role of IN in the mobilization of intracellular calcium is emerging. In addition, influx of extracellular calcium also contributes to increase in [Ca^–+];. The increase in [Ca⁺⁺]; following activation via some T cell surface antigen is predominantly due to intracellular mobilization of Ca^–+ (e.g. CD3/TcR complex), whereas activation via other T cell surface antigen, the increase in [Ca^+–]_i is almost entirely due to an influx of extracellular calcium (e.g. CD5 antigen). All these molecules activate autocrine system of T cell growth, namely IL-2 production, IL-2 receptor expression and T cell proliferation.     

Use of Multiple-Site Performance-Contingent SEMG Reward Programming in Pediatric Rehabilitation: A Retrospective Review

We completed a retrospective review of the effectiveness of multi-site, performance-contingent reward programming on functional change in motor performance of 16 treatment resistant children. Patients were previously treated in physical or occupational therapy for head control, standing balance training, sitting and upper extremity use (brachial plexus injury). They then participated in a program that utilized multiple surface electromyography sites the use of which was rewarded with videos for performing the correct constellation of recruitment pattern (e.g., contracting some muscles while relaxing others). Onset of reward was calibrated for each patient and transfer of skill to outside the clinic was encouraged by linking a verbal cue to the correct motor plan. Fourteen of the 16 patients improved. The implications of the use of this technique in the treatment of motor dysfunction is discussed.     

Charge clusters and the orientation of membrane proteins

Summary Although hydrophobic forces probably dominate in determining whether or not a protein will insert into a membrane, recent studies in our laboratory suggest that electrostatic forces may influence the final orientation of the inserted protein. A negatively charged hepatic receptor protein was found to respond totrans-positive membrane potentials as though electrophoresing into the bilayer. In the presence of ligand, the protein appeared to cross the membrane and expose binding sites on the opposite side. Similarly, a positively charged portion of the peptide melittin crosses a lipid membrane reversibly in response to atrans-negative potential. These findings, and others by Date and co-workers, have led us to postulate that transmembrane proteins would have hydrophobic transmembrane segments bracketed by positively charged residues on the cytoplasmic side and negatively charged residues on the extra-cytoplasmic side. In the thermodynamic sense, these asymmetrically placed charge clusters would create a compelling preference for correct orientation of the protein, given the inside-negative potential of most or all cells. This prediction is borne out by examination of the few transmembrane proteins (glycophorin, M13 coat protein, H-2K^b, HLA-A2, HLA-B7, and mouse Ig heavy chain) for which we have sufficient information on both sequence and orientation.In addition to the usual diffusion and pump potentials measurable with electrodes, the microscopic membrane potential reflects surface charge effects. Asymmetries in surface charge arising from either ionic or lipid asymmetries would be expected to enhance the bias for correct protein orientation, at least with respect to plasma membranes. We introduce a generalized form of Stern equation to assess surface charge and binding effects quantitatively. In the kinetic sense, dipole potentials within the membrane would tend to prevent positively charged residues from crossing the membrane to leave the cytoplasm. These considerations are consistent with the observed protein orientations. Finally, the electrostatic and hydrophobic factors noted here are combined in two hypothetical models of translocation, the first involving initial interaction of the presumptive transmembrane segment with the membrane; the second assuming initial interaction of a leader sequence.     

Optimization for producing cell-bound lipase from <Emphasis Type="Italic">Geotrichum</Emphasis> sp. and synthesis of methyl oleate in microaqueous solvent

An integrated optimization strategy involving a combination of different designs was employed to optimize producing conditions of cell-bound lipase (CBL) from Geotrichum sp. Firstly, it was obtained by a single factorial design that the most suitable carbon source was a mixture of olive oil and citric acid and the most suitable nitrogen source was a mixture of corn steep liquor and NH₄NO₃. Then, the Plackett–Burman design was used to evaluate the effects of 13 variables related to CBL production, and three statistically significant variables namely, temperature, olive oil concentration, and NH₄NO₃ concentration, were selected. Subsequently, the levels of the three variables for maximum CBL production were determined by response surface analysis as follows: 1.64% (v/v) olive oil, 1.49% (w/v) NH₄NO₃, and temperature 33.00°C. Such optimization resulted in a high yield of CBL at 23.15 U/ml, an enhanced 4.45-fold increase relative to the initial result (5.2 U/ml) in shake flasks. The dried CBL was used to synthesize methyl oleate in microaqueous hexane, resulting in 94% conversion after 24 h, and showed reusability with 70% residual activity and 69% conversion after eight cycles of batch operation, which indicating that CBL, as a novel and natural form of immobilized enzyme, can be effectively applied in repeated synthesis of methyl oleate in a microaqueous solvent.     

Effect of reline material and denture base surface treatment on the impact strength of a denture base acrylic resin

doi:10.1111/j.1741‐2358.2009.00292.x
Effect of reline material and denture base surface treatment on the impact strength of a denture base acrylic resin Objective: In this study, the effect of relining and surface treatment on the impact strength (IS) of a heat‐polymerising denture base acrylic resin (Lucitone 550‐L) was evaluated. Materials and methods: Rectangular bars of L were made (60 × 6 × 2 mm) and relined (2 mm) with the relining resins Ufi Gel Hard (UH) and Tokuso Rebase Fast (TR). Specimens relined with L and intact L, TR and UH specimens were also made (60 × 6 × 4 mm), for comparison. Before relining, the L surface was left untreated or wetted with methyl methacrylate monomer and/or the bonding agents (BA) supplied by manufacturers of the reline resins. V‐notches were machined at the midpoint of the length of all specimens. The notches were made either across the width (Nw) or across the thickness of the specimens (Nth). The Charpy impact test was performed using a 0.5‐J pendulum, which had been specially designed and constructed. Data were analysed separately for each notch position using one‐way analysis of variance and Tukey honestly significant difference post‐hoc test (p = 0.05). Results: The IS of L was similar to that of L/L. For the Nw notch, treating the denture base L with TR BA and relining with TR reline material produced the highest IS. Conclusion: The IS of specimens made from heat polymerising acrylic resin Lucitone 550 was increased after relining using the hard chairside reline resin TR with its proprietary BA.