MicroID2: A Novel Biotin Ligase Enables Rapid Proximity-Dependent Proteomics

Identifying protein–protein and other proximal interactions is central to dissecting signaling and regulatory processes in cells. BioID is a proximity-dependent biotinylation method that uses an “abortive” biotin ligase to detect proximal interactions in cells in a highly reproducible manner. Recent advancements in proximity-dependent biotinylation tools have improved efficiency and timing of labeling, allowing for measurement of interactions on a cellular timescale. However, issues of size, stability, and background labeling of these constructs persist. Here we modified the structure of BioID2, derived from Aquifex aeolicus BirA, to create a smaller, highly active, biotin ligase that we named MicroID2. Truncation of the C terrminus of BioID2 and addition of mutations to alleviate blockage of biotin/ATP binding at the active site of BioID2 resulted in a smaller and highly active construct with lower background labeling. Several additional point mutations improved the function of our modified MicroID2 construct compared with BioID2 and other biotin ligases, including TurboID and miniTurbo. MicroID2 is the smallest biotin ligase reported so far (180 amino acids [AAs] for MicroID2 versus 257 AAs for miniTurbo and 338 AAs for TurboID), yet it demonstrates only slightly less labeling activity than TurboID and outperforms miniTurbo. MicroID2 also had lower background labeling than TurboID. For experiments where precise temporal control of labeling is essential, we in addition developed a MicroID2 mutant, termed lbMicroID2 (low background MicroID2), that has lower labeling efficiency but significantly reduced biotin scavenging compared with BioID2. Finally, we demonstrate utility of MicroID2 in mass spectrometry experiments by localizing MicroID2 constructs to subcellular organelles and measuring proximal interactions.     

The presence of 12β-deoxydecarbamoylsaxitoxin in the Japanese toxic dinoflagellate Alexandrium determined by simultaneous analysis for paralytic shellfish toxins using HILIC-LC–MS/MS

A differential screening study using high-resolution (HR)-hydrophilic interaction chromatography (HILIC)-electrospray ionization (ESI)–quadrupole time-of-flight mass spectrometry (Q-TOF MS) was conducted to identify saxitoxin (STX) analogues in the marine dinoflagellate toxic sub-clone Alexandrium tamarense Axat-2 and the non-toxic sub-clone UAT-014-009 derived from the same Japanese isolate. One unknown compound was identified only in the toxic sub-clone and was found to have the molecular formula C₉H₁₆N₆O₂. This structure differed from that of decarbamoyl STX (dcSTX; C₉H₁₆N₆O₃) by the loss of a single oxygen. A 12-deoxy-dcSTX standard (a mixture of 12α- and β-deoxy-dcSTX) was chemically prepared from dcSTX by reduction with sodium borohydride. The unknown compound in the toxic strain of A. tamarense was identified as 12β-deoxy-dcSTX by comparison of its HR-HILIC-LC–MS retention time and HR–MS/MS spectrum with those of the chemically prepared standard, and the identification was confirmed by high-sensitivity HPLC analysis with post-column fluorescent derivatization. Moreover, two Japanese isolates of A. catenella showing toxin profiles different from that of A. tamarense were also found to contain 12β-deoxy-dcSTX. Previously, 12β-deoxy-dcSTX was isolated from the freshwater cyanobacterium Lyngbya wollei, which produces a unique set of STX analogues. This study is the first evidence of the presence of 12β-deoxy-dcSTX in marine dinoflagellates.     

Morphology,phylogeny and novel chemical compounds from Coolia malayensis (Dinophyceae) from Okinawa,Japan

Marine benthic dinoflagellates within the genus Coolia have been reported to produce natural products, some of which are known to be toxic (i.e., cooliatoxin). To date, five species of Coolia have been reported in tropical and temperate waters around the world; however, very few studies have combined detailed morphological and molecular data with chemical analyses. In this study, a clonal culture of Coolia malayensis was isolated and mass cultivated from a coral reef on the island of Okinawa, Japan. Analysis of the thecal plate morphology and molecular phylogeny from 28S rDNA strongly supported the close relationship between this new isolate of C. malayensis from Okinawa and other isolates of C. malayensis from around the world. Following methanol extraction of 250 L of mass culture, chemical analyses using NanoLiquid chromatography mass spectrometry revealed the mass profiles of water-soluble and ethyl acetate-soluble parts. High-resolution mass spectrometry derived the molecular formulas of three novel disulphated polyether analogs of yessotoxin (C₅₆H₇₈O₁₈S₂ 1102.4 (Compound 1), C₅₇H₈₀O₁₈S₂ 1116.4 (Compound 2), and C₅₇H₇₈O₁₉S₂ 1130.4 (Compound 3)); two potential homologous compounds (Compounds 4 and 5) were also observed on the high-resolution mass, albeit with low signal intensity. The five compounds in the C. malayensis from Okinawa are composed of less oxygen, compared to cooliatoxin and other analogs of yessotoxin, suggesting the metabolites produced by C. malayensis are unique to those previously reported from other strains of Coolia.     

Accuracies in Po-210 determination for lead-210 dating

Various laboratory techniques have been utilized worldwide for measuring lead-210 in sub-recent deposits through its grand-daughter product polonium-210. Isotope dilution alpha spectrometry proved a suitable tool for absolute determination of lead-210 for the dating of aquatic deposits. Moreover, isotope dilution alpha spectrometry along with speciation experiments can be used to resolve depositional anomalies arising from supported lead-210/Ra-226 disequilibrium levels and unsupported lead-210 mobile fractions. Isotope dilution alpha spectrometry of sub-recent sediment and peat deposits has been critically evaluated for more than ten years. Our results show that type, size and composition of deposits analyzed as well as radiochemical procedures used, together with alpha counting techniques, are important factors influencing lead-210 determinations and tailing corrections using its granddaughter product polonium-210. Optimization of these parameters is of prime importance to achieve economic and accurate analyses, especially at low lead-210 concentrations and small sample sizes.     

Estimating recent growth in the cuttlefish Sepia officinalis: are nucleic acid-based indicators for growth and condition the method of choice?

A laboratory calibration study was undertaken with juvenile Sepia officinalis (80-85 g initial wet weight) to investigate the effects of different food rations and different starving intervals on RNA/dry weight (DW) ratios and RNA/DNA ratios in cephalopod mantle muscle at two different temperatures. The digestive gland index was also used as an additional indicator of recent growth. High food rations and low temperature went along with high RNA/DW ratios and high RNA/DNA ratios. Starving resulted in a linear decline in growth performance and a concomitant decrease in RNA/DW and RNA/DNA ratio, with RNA/DNA ratios representing the growth data better. RNA/DNA ratios decreased faster at higher temperatures. A fluorimetric assay for nucleic acid analysis was optimized for cephalopod mantle tissues and yielded reproducible RNA/DNA ratios with a relative variance below 10%. Thus, it may be possible to use this estimator of recently encountered feeding regime for the evaluation of mortality rates of early teuthid paralarvae to eventually support stock management. Also, log relative digestive gland weight showed a strong relationship with starving time, but, surprisingly, not with temperature. Data from the two temperatures analyzed could be combined to form a common regression line of relative digestive gland index with starving time. This indicator for recent growth might be especially suitable for large specimens with a well-developed digestive gland.     

Novel Monte Carlo dose calculation algorithm for robotic radiosurgery with multi leaf collimator: Dosimetric evaluation

PurposeAt introduction in 2014, dose calculation for the first MLC on a robotic SRS/SBRT platform was limited to a correction-based Finite-Size Pencil Beam (FSPB) algorithm. We report on the dosimetric accuracy of a novel Monte Carlo (MC) dose calculation algorithm for this MLC, included in the Precision™ treatment planning system.MethodsA phantom was built of one slab (5.0 cm) of lung-equivalent material (0.09…0.29 g/cc) enclosed by 3.5 cm (above) and 5 cm (below) slabs of solid water (1.045 g/cc). This was irradiated using rectangular (15.4 × 15.4 mm² to 53.8 × 53.7 mm²) and two irregular MLC-fields. Radiochromic film (EBT3) was positioned perpendicular to the slabs and parallel to the beam. Calculated dose distributions were compared to film measurements using line scans and 2D gamma analysis.ResultsMeasured and MC calculated percent depth dose curves showed a characteristic dose drop within the low-density region, which was not correctly reproduced by FSPB. Superior average gamma pass rates (2%/1 mm) were found for MC (91.2 ± 1.5%) compared to FSPB (55.4 ± 2.7%). However, MC calculations exhibited localized anomalies at mass density transitions around 0.15 g/cc, which were traced to a simplification in electron transport. Absence of these anomalies was confirmed in a modified build of the MC engine, which increased gamma pass rates to 96.6 ± 1.2%.ConclusionsThe novel MC algorithm greatly improves dosimetric accuracy in heterogeneous tissue, potentially expanding the clinical use of robotic radiosurgery with MLC. In-depth, independent validation is paramount to identify and reduce the residual uncertainties in any software solution.     

Familial breast/ovarian cancer and BRCA1/2 genetic screening: the role of immunohistochemistry as an additional method in the selection of patients.

Only 20-25% of families screened for BRCA1/2 mutations are found positive. Because only a positive result is informative, we studied the role of BRCA1/2 immunohistochemistry as an additional method for patient selection. From 53 high-risk-affected probands, 18 (34%) had available paraffin blocks of their tumors and were selected for this study. Mutation screening was done by conformation-sensitive gel electrophoresis and multiplex ligation-dependent probe amplification. For immunohistochemistry, 21 neoplastic specimens (15 breast carcinomas, 5 ovary neoplasms, and 1 rectal adenocarcinoma) were analyzed with BRCA1 (monoclonal antibody, Ab-1, oncogene) and BRCA2 (polyclonal antibody, Ab-2, oncogene) antibodies. Absence of the BRCA1 protein was confirmed in negative tumors by Western blotting. Seven patients were positive for BRCA1/2 mutations: 5 for BRCA1 and 2 for BRCA2. Four out of five positive patients had tumors negative for BRCA1 immunostaining, and the remaining 13 BRCA1-negative patients had positive BRCA1 immunostaining in all tumor samples. Sensitivity to predict for BRCA1 mutation carriers was 80%, and specificity was 100%, with a positive predictive value of 100% and a negative predictive value of 93%. This correlation was statistically significant (p=0.001). No correlation was observed for BRCA2. If larger studies confirm these results, high-risk patients with BRCA1-negative tumors should be screened first for this gene.