Real time monitoring of biofilm development under flow conditions in porous media

Biofilm growth can impact the effectiveness of industrial processes that involve porous media. To better understand and characterize how biofilms develop and affect hydraulic properties in porous media, both spatial and temporal development of biofilms under flow conditions was investigated in a translucent porous medium by using Pseudomonas fluorescens HK44, a bacterial strain genetically engineered to luminesce in the presence of an induction agent. Real-time visualization of luminescent biofilm growth patterns under constant pressure conditions was captured using a CCD camera. Images obtained over 8 days revealed that variations in bioluminescence intensity could be correlated to biofilm cell density and hydraulic conductivity. These results were used to develop a real-time imaging method to study the dynamic behavior of biofilm evolution in a porous medium, thereby providing a new tool to investigate the impact of biological fouling in porous media under flow conditions.     

Molecular dynamics simulations of heat conduction in multi-walled carbon nanotubes

Heat conduction in multi-walled carbon nanotubes (MWNTs) was studied using non-equilibrium molecular dynamics simulations. This research focuses on the effects of the multi-wall structure of the MWNTs on the heat conduction. The results show that the thermal conductivity of a MWNT is almost the same as that of the corresponding single-walled carbon nanotubes (SWNTs) rather than much smaller as has been suggested. Thus, the multi-wall structure does not significantly affect the thermal conduction in the MWNTs. Analysis of the temperature profiles and the phonon density of states confirms that there is almost no heat transport between the MWNT layers and that each layer conducts heat nearly independently along parallel channels. This is physically reasonable since the weak inter-wall interactions and large interfacial thermal resistances make the MWNT layers behave like parallel thermal circuits.     

Molecular dynamics simulation of film size and vacancy defect effects on the thermal conductivities of argon thin films

It is well known that there is a size effect for the thermal conductivity of thin films and that vacancy defects in film reduce the film's thermal conduction. In this paper, the film size and vacancy defect effects on the thermal conductivities of argon thin films were studied by molecular dynamics simulations. The results show the existence of phonon boundary scattering. The results also confirm that the theoretical model based on the Boltzmann equation can accurately model the thermal conduction of thin argon films. Both the theoretical and MD results illustrate that, although, both the defect and the thickness of the thin film deduce the thermal conductivity, their physical mechanisms differ.     

Aqueous pathways dominate permeation of solutes across Pisum sativum seed coats and mediate solute transport via diffusion and bulk flow of water

The permeability of seed coats to solutes either of biological or anthropogenic origin plays a major role in germination, seedling growth and seed treatment by pesticides. An experimental set‐up was designed for investigating the mechanisms of seed coat permeation, which allows steady‐state experiments with isolated seed coats of Pisum sativum. Permeances were measured for a set of organic model compounds with different physicochemical properties and sizes. The results show that narrow aqueous pathways dominate the diffusion of solutes across pea seed coats, as indicated by a correlation of permeances with the molecular sizes of the compounds instead of their lipophilicity. Further indicators for an aqueous pathway are small size selectivity and a small effect of temperature on permeation. The application of an osmotic water potential gradient across isolated seed coats leads to an increase in solute transfer, indicating that the aqueous pathways form a water‐filled continuum across the seed coat allowing the bulk flow of water. Thus, the uptake of organic solutes across pea testae has two components: (1) by diffusion and (2) by bulk water inflow, which, however, is relevant only during imbibition.     

Macroinvertebrate community structure,secondary production and trophic‐level dynamics in urban streams affected by non‐point‐source pollution

1. Despite non‐point‐source (NPS) pollution being perhaps the most ubiquitous stressor affecting urban streams, there is a lack of research assessing how urban NPS pollution affects stream ecosystems. We used a natural experimental design approach to assess how stream macroinvertebrate community structure, secondary production and trophic structure are influenced by urban NPS pollution in six streams. 2. Differences in macroinvertebrate community structure and secondary production among sites were highly correlated with stream‐water specific conductivity and dissolved inorganic phosphorus (DIP) concentrations. Macroinvertebrate richness, the Shannon diversity index and the Shannon evenness index were all negatively correlated with specific conductivity. These patterns were driven by differences in the richness and production of EPT and other intolerant taxa. Production of the five most productive taxa, tolerant taxa, non‐insect taxa and primary consumers were all positively correlated with stream‐water DIP. 3. Despite the positive correlation between primary consumer production and DIP, there was no correlation between macroinvertebrate predator production and either total or primary consumer macroinvertebrate production. This was observed because DIP was positively correlated with the production of non‐insect macroinvertebrate taxa assumed to be relatively unavailable for macroinvertebrate predator consumption. After removing production of these taxa, we observed a strong positive correlation between macroinvertebrate predator production and production of available prey. 4. Our results suggest that urban NPS pollution not only affects macroinvertebrate community structure, but also alters secondary production and trophic‐level dynamics. Differences in taxon production in our study indicate the potential for altered energy flow through stream food webs and potential effects on subsidies of aquatic insect prey to riparian food webs.     

Outstanding Low Temperature Thermoelectric Power Factor from Completely Organic Thin Films Enabled by Multidimensional Conjugated Nanomaterials

In an effort to create a paintable/printable thermoelectric material, comprised exclusively of organic components, polyaniline (PANi), graphene, and double‐walled nanotube (DWNT) are alternately deposited from aqueous solutions using the layer‐by‐layer assembly technique. Graphene and DWNT are stabilized with an intrinsically conductive polymer, poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). An 80 quadlayer thin film (≈1 μm thick), comprised of a PANi/graphene‐PEDOT:PSS/PANi/DWNT‐PEDOT:PSS repeating sequence, exhibits unprecedented electrical conductivity (σ ≈ 1.9 × 10⁵ S m^?1) and Seebeck coefficient (S ≈ 120 μV K^?1) for a completely organic material. These two values yield a thermoelectric power factor (PF = S ² σ ^?1) of 2710 μW m^?1 K^?2, which is the highest value ever reported for a completely organic material and among the highest for any material measured at room temperature. These outstanding properties are attributed to the highly ordered structure in the multilayer assembly. This water‐based thermoelectric nanocomposite is competitive with the best inorganic semiconductors (e.g., bismuth telluride) at room temperature and can be applied as a coating to any flexible surface (e.g., fibers in clothing). For the first time, there is a real opportunity to harness waste heat from unconventional sources, such as body heat, to power devices in an environmentally‐friendly way.     

Effects of different arbuscular mycorrhizal fungal backgrounds and soils on olive plants growth and water relation properties under well‐watered and drought conditions

The adaptation capacity of olive trees to different environments is well recognized. However, the presence of microorganisms in the soil is also a key factor in the response of these trees to drought. The objective of the present study was to elucidate the effects of different arbuscular mycorrhizal (AM) fungi coming from diverse soils on olive plant growth and water relations. Olive plants were inoculated with native AM fungal populations from two contrasting environments, that is, semi‐arid – Freila (FL) and humid – Grazalema (GZ) regions, and subjected to drought stress. Results showed that plants grew better on GZ soil inoculated with GZ fungi, indicating a preference of AM fungi for their corresponding soil. Furthermore, under these conditions, the highest AM fungal diversity was found. However, the highest root hydraulic conductivity (Lp_r) value was achieved by plants inoculated with GZ fungi and growing in FL soil under drought conditions. So, this AM inoculum also functioned in soils from different origins. Nine novel aquaporin genes were also cloned from olive roots. Diverse correlation and association values were found among different aquaporin expressions and abundances and Lp_r, indicating how the interaction of different aquaporins may render diverse Lp_r values.     

Decrease in Hydraulic Conductivity of a Paddy Field using Biocalcification in situ

The hydraulic conductivity of a paddy field (Anthraquic Dystrustept), a silty clay soil containing more than 29% (w/w) of gravel, in Nagoya University Farm was reduced by in situ treatment of subsurface soil using bentonite and biocalcification (microbial calcium carbonate precipitation) through the addition of CaCl₂, urea, and corn steep liquor (CSL). The treatment decreased the hydraulic conductivity of the field from an average of 10^?3 cm/s to a range of 10^?5 to 10^?7 cm/s during 69 days, with reducing the proportion of pores of subsurface soil larger than 75 µm in diameter. The biocalcification effect was observed at 10-cm thickness from the treated subsurface. Laboratory soil core experiments demonstrated that the decrease in the hydraulic conductivity was not attributed to the effect of bentonite but mainly to the effect of biocalcification. The addition of CSL enhanced the urease activity of soil required for biocalcification, even at 4°C, as indicated by a decrease in urease activation energy temperature sensitivity. These experimental results agreed with the gradual decrease in hydraulic conductivity observed in the field when the average daily temperature was 7°C (days 24–69). It was suggested that the biocalcification is a potential technique to reduce the hydraulic conductivity of paddy field.     

Comparative regional-scale soil salinity assessment with near-ground apparent electrical conductivity and remote sensing canopy reflectance

Soil salinity is recognized worldwide as a major threat to agriculture, particularly in arid and semi-arid regions. Producers and decision makers need updated and accurate maps of salinity in agronomically and environmentally relevant ranges (i.e., <20 dS m⁻¹, when salinity is measured as electrical conductivity of the saturation extract, EC_e). State-of-the-art approaches for creating accurate EC_e maps beyond field scale (i.e., 1 km²) include: (i) Analysis Of Covariance (ANOCOVA) of near-ground measurements of apparent soil electrical conductivity (EC_a) and (ii) regression modeling of multi-year remote sensing canopy reflectance and other co-variates (e.g., crop type, annual rainfall). This study presents a comparison of the two approaches to establish their viability and utility. The approaches were tested using 22 fields (total 542 ha) located in California’s western San Joaquin Valley. In 2013 EC_a-directed soil sampling resulted in the collection of 267 soil samples across the 22 fields, which were analyzed for EC_e, ranging from 0 to 38.6 dS m⁻¹. The ANOCOVA EC_a-EC_e model returned a coefficient of determination (R²) of 0.87 and root mean square prediction error (RMSPE) of 3.05 dS m⁻¹. For the remote sensing approach seven years (2007–2013) of Landsat 7 reflectance were considered. The remote sensing salinity model had R² = 0.73 and RMSPE = 3.63 dS m⁻¹. The robustness of the models was tested with a leave-one-field-out (lofo) cross-validation to assure maximum independence between training and validation datasets. For the ANOCOVA model, lofo cross-validation provided a range of scenarios in terms of RMSPE. The worst, median, and best fit scenarios provided global cross-validation R² of 0.52, 0.80, and 0.81, respectively. The lofo cross-validation for the remote sensing approach returned a R² of 0.65. The ANOCOVA approach performs particularly well at EC_e values <10 dS m⁻¹, but requires extensive field work. Field work is reduced considerably with the remote sensing approach, but due to the larger errors at low EC_e values, the methodology is less suitable for crop selection, and other practices that require accurate knowledge of salinity variation within a field, making it more useful for assessing trends in salinity across a regional scale. The two models proved to be viable solutions at large spatial scales, with the ANOCOVA approach more appropriate for multiple-field to landscape scales (1–10 km²) and the remote sensing approach best for landscape to regional scales (>10 km²).     

Uniform High Ionic Conducting Lithium Sulfide Protection Layer for Stable Lithium Metal Anode

Artificial solid‐electrolyte interphase (SEI) is one of the key approaches in addressing the low reversibility and dendritic growth problems of lithium metal anode, yet its current effect is still insufficient due to insufficient stability. Here, a new principle of “simultaneous high ionic conductivity and homogeneity” is proposed for stabilizing SEI and lithium metal anodes. Fabricated by a facile, environmentally friendly, and low‐cost lithium solid‐sulfur vapor reaction at elevated temperature, a designed lithium sulfide protective layer successfully maintains its protection function during cycling, which is confirmed by both simulations and experiments. Stable dendrite‐free cycling of lithium metal anode is realized even at a high areal capacity of 5 mAh cm^?2, and prototype Li–Li₄Ti₅O₁₂ cell with limited lithium also achieves 900 stable cycles. These findings give new insight into the ideal SEI composition and structure and provide new design strategies for stable lithium metal batteries.