De novo design of novel DNA–gyrase inhibitors based on 2D molecular fingerprints

As increasing drug-resistance poses an emerging threat to public health, the development of novel antibacterial agents is critical. We developed a workflow consisting of various methods for de novo design. In the workflow, 2D-QSAR model based on molecular fingerprints was constructed to extract the bioactive molecular fingerprints from a data set of DNA–gyrase inhibitors with new structure and mechanism. These fingerprints were converted into molecular fragments which were recombined to generate compound library. The new compound library was virtually screened by LigandFit and Gold docking, and the results were further investigated by pharmacophore validation and binding mode analysis. The workflow successfully achieved a potential DNA–gyrase inhibitor. It could be applied to design more novel potential DNA–gyrase inhibitors and provide theoretical basis for further optimization of the hit compounds.     

Improving the antibacterial activity and selectivity of an ultra short peptide by hydrophobic and hydrophilic amino acid stretches

The principle of amino acid stretches tagged at the C terminal of Luecrocin I, which is an ultra-short antibacterial peptide, by tryptophan and arginine or lysine has been reported. The choice of amino acid type at each stretch position depends on the hydrophobic and hydrophilic regions visualized in the helical wheel pattern of Luecrocin I. Oligopeptide tagging should also consider the properties such as positive charge, hydrophobicity, the content of hydrophobic amino acids, polar angle, the properly hydrophilic and hydrophobic facets. Amidation at C terminal and lysine substitute for arginine can increase selectivity between mammalian cells (hemolytic and MTT assay) and bacterial cells tested. KT2 and RT2 which have 53% hydrophobic residues, 7 positive charges, 160° polar angle, ?0.02 (KT2) and ?0.04 (RT2) hydrophobicity were effective against S. typhi DMST 22842, S. epidermidis ATCC 12228, E. coli ATCC 25922 and V. cholerae non-O1, non-O139. The SEM images implied that the antibacterial mechanism of RT2 and KT2 may depend on concentration rather than time. Finally, RT2 and KT2 can be new antibacterial agents or may be further developed for alternative antibiotics.     

Optimizing the generation of random amplified polymorphic DNAs in chrysanthemum

Many conditions of the RAPD reaction procedure may influence the result. This paper presents rapid detection of influential factors with a fractional factorial experiment. A more extensive study of these factors is also presented. Polymerase brand, thermal cycler brand, annealing temperature, and primer, are important factors in obtaining good DNA yields and optimal fragment patterns. Each primer has its optimal annealing temperature, and this is not correlated with the GC content of the primer. Optimal species-primer combinations have to be found by trial and error.     

3D-QSAR study of microsomal prostaglandin E<Subscript>2</Subscript> synthase(mPGES-1) inhibitors

Microsomal prostaglandin E₂ synthase (mPGES-1) has been identified recently as a novel target for treating pain and inflammation. The aim of this study is to understand the binding affinities of reported inhibitors for mPGES-1 and further to design potential new mPGES-1 inhibitors. 3D-QSAR-CoMFA (comparative molecular field analysis) and CoMSIA (comparative molecular similarity indices analysis) - techniques were employed on a series of indole derivatives that act as selective mPGES-1 inhibitors. The lowest energy conformer of the most active compound obtained from systematic conformational search was used as a template for the alignment of 32 compounds. The models obtained were used to predict the activities of the test set of eight compounds, and the predicted values were in good agreement with the experimental results. The 3D-QSAR models derived from the training set of 24 compounds were all statistically significant (CoMFA; q ² = 0.89, r ² = 0.95, , and CoMSIA; q ² = 0.84, r ² = 0.93, , ). Contour plots generated for the CoMFA and CoMSIA models reveal useful clues for improving the activity of mPGES-1 inhibitors. In particular, substitutions of an electronegative fluorine atom or a bulky hydrophilic phenoxy group at the meta or para positions of the biphenyl rings might improve inhibitory activity. A plausible binding mode between the ligands and mPGES-1 is also proposed.     

Effects of salt bridges on protein structure and design.

Theoretical calculations (Hendsch ZS & Tidor B, 1994, Protein Sci 3:211-226) and experiments (Waldburger CD et al., 1995, Nat Struct Biol 2:122-128; Wimley WC et al., 1996, Proc Natl Acad Sci USA 93:2985-2990) suggest that hydrophobic interactions are more stabilizing than salt bridges in protein folding. The lack of apparent stability benefit for many salt bridges requires an alternative explanation for their occurrence within proteins. To examine the effect of salt bridges on protein structure and stability in more detail, we have developed an energy function for simple cubic lattice polymers based on continuum electrostatic calculations of a representative selection of salt bridges found in known protein crystal structures. There are only three types of residues in the model, with charges of -1, 0, or + 1. We have exhaustively enumerated conformational space and significant regions of sequence space for three-dimensional cubic lattice polymers of length 16. The results demonstrate that, while the more highly charged sequences are less stable, the loss of stability is accompanied by a substantial reduction in the degeneracy of the lowest-energy state. Moreover, the reduction in degeneracy is greater due to charges that pair than for lone charges that remain relatively exposed to solvent. We have also explored and illustrated the use of ion-pairing strategies for rational structural design using model lattice studies.     

引进马铃薯种质资源抗旱性评价

马铃薯属于干旱敏感型作物,当前生产上的马铃薯品种多数不耐旱,中国马铃薯抗旱育种进程又受到遗传背景狭窄的制约。引进外来种质资源,拓宽我国马铃薯遗传背景,加快选育抗旱品种是马铃薯应对干旱的关键策略。2016年和2017年,在常规滴灌和雨养条件下,利用增广设计方法,以生产上常用的5个马铃薯品种为对照,对来自国际马铃薯中心的315份高代品系和中国已有的3个品种进行抗旱性评价。通过AMMI模型和GGE模型分析基因型、环境及二者互作对产量的影响,并结合抗旱指数筛选抗旱性稳定且产量高的材料。从整体上看,在雨养条件下,两年马铃薯平均产量差异较小,但是变异系数较大,常规滴灌条件下正好相反。马铃薯产量受基因型、环境及其交互作用的显著影响,其变异平方和分别占总处理平方和的43.39%、39.36%和17.26%;C93和YS902两年的抗旱指数均高于对照品种,稳产性好,C48虽然抗旱指数相对较低,但是高产和稳产性高于所有材料。筛选出来的材料不仅可以作为抗旱育种亲本,还可以通过进一步研究其抗旱机制,为抗旱育种提供理论支持。     

Effect of acyl donor chain length and sugar/acyl donor molar ratio on enzymatic synthesis of fatty acid fructose esters

Lipase-catalyzed synthesis of fatty acid sugar esters through direct esterification was performed in 2-methyl 2-butanol as solvent. Fructose and saturated fatty acids were used as substrates and the reaction was catalyzed by immobilized Candida antarctica lipase. The effect of the initial fructose/acyl donor molar ratio and the carbon-chain length of the acyl donor as well as their reciprocal interactions on the reaction performance were investigated. For this purpose, an experimental design taking into account variations of the molar ratio (from 1:1 to 1:5) and the carbon-chain length of the fatty acid (from C8 to C18) was employed. Statistical analysis of the data indicated that the two factors as well as their interactions had significant effects on the sugar esters synthesis. The obtained results showed that whatever the molar ratio used, the highest concentration (73 g l⁻¹), fructose and fatty acid conversion yields (100% and 80%, respectively) and initial reaction rate (40 g l⁻¹ h⁻¹) were reached when using the C18 fatty acid as acyl donor. Low molar ratios gave the best fatty acid conversion yields and initial reaction rates, whereas the best total sugar ester concentrations and fructose conversion yields were obtained for high molar ratios.     

Boosting protein stability with the computational design of β‐sheet surfaces

β‐sheets often have one face packed against the core of the protein and the other facing solvent. Mutational studies have indicated that the solvent‐facing residues can contribute significantly to protein stability, and that the preferred amino acid at each sequence position is dependent on the precise structure of the protein backbone and the identity of the neighboring amino acids. This suggests that the most advantageous methods for designing β‐sheet surfaces will be approaches that take into account the multiple energetic factors at play including side chain rotamer preferences, van der Waals forces, electrostatics, and desolvation effects. Here, we show that the protein design software Rosetta, which models these energetic factors, can be used to dramatically increase protein stability by optimizing interactions on the surfaces of small β‐sheet proteins. Two design variants of the β‐sandwich protein from tenascin were made with 7 and 14 mutations respectively on its β‐sheet surfaces. These changes raised the thermal midpoint for unfolding from 45°C to 64°C and 74°C. Additionally, we tested an empirical approach based on increasing the number of potential salt bridges on the surfaces of the β‐sheets. This was not a robust strategy for increasing stability, as three of the four variants tested were unfolded.     

The Alacoil: A very tight,antiparallel coiled-coil of helices

The Alacoil is an antiparallel (rather than the usual parallel) coiled-coil of α-helices with Ala or another small residue in every seventh position, allowing a very close spacing of the helices (7.5–8.5 Å between local helix axes), often over four or five helical turns. It occurs in two distinct types that differ by which position of the heptad repeat is occupied by Ala and by whether the closest points on the backbone of the two helices are aligned or are offset by half a turn. The aligned, or ROP, type has Ala in position “d” of the heptad repeat, which occupies the “tip-to-tip” side of the helix contact where the Cα–Cβ bonds point toward each other. The more common offset, or ferritin, type of Alacoil has Ala in position “a” of the heptad repeat (where the Cα-Cβ bonds lie back-to-back, on the “knuckle-touch” side of the helix contact), and the backbones of the two helices are offset vertically by half a turn. In both forms, successive layers of contact have the Ala first on one and then on the other helix. The Alacoil structure has much in common with the coiled-coils of fibrous proteins or leucine zippers: both are α-helical coiled-coils, with a critical amino acid repeated every seven residues (the Leu or the Ala) and a secondary contact position in between. However, Leu zippers are between aligned, parallel helices (often identical, in dimers), whereas Alacoils are between antiparallel helices, usually offset, and much closer together. The Alacoil, then, could be considered as an “Ala anti-zipper.” Leu zippers have a classic “knobs-into-holes” packing of the Leu side chain into a diamond of four residues on the opposite helix; for Alacoils, the helices are so close together that the Ala methyl group must choose one side of the diamond and pack inside a triangle of residues on the other helix. We have used the ferritin-type Alacoil as the basis for the de novo design of a 66-residue, coiled helix hairpin called “Alacoilin.” Its sequence is: cmSP DQWDKE A AQYDAHA QE FEKKS HRNng TPEA DQYRHM A SQY QAMA QK LKAIA NQLKK Gseter (with “a” heptad positions underlined and nonhelical parts in lowercase), which we will produce and test for both stability and uniqueness of structure.