Synthesis and characterization of the cobalt(III) complexes of two pendant-arm cross-bridged cyclams

The cobalt(III) complexes of 4,11-diacetato-1,4,8,11-tetraazabicyclo[6.6.2]hexadecane (1), [Co(1)]PF₆, and 4,11-diacetamido-1,4,8,11-tetraazabicyclo[6.6.2]hexadecane (2), [Co(2)][PF₆]₃, have been synthesized and characterized. The crystal structure of [Co(1)]PF₆ consists of an octahedral cobalt(III) cation coordinated to all four ligand nitrogen donors in the macrobicycle’s cavity, as well as to the deprotonated carboxylate oxygen atoms of both pendant arms. Analytical and spectroscopic data indicates that the ligand in [Co(2)][PF₆]₃ is not deprotonated, suggesting coordination through the amide carbonyl oxygens. Study of the electronic spectra of these novel complexes and comparison with data from related cobalt(III) complexes characterizes the ligands as strong field with Δ₀=24,040 and Δ₀=24,250 cm⁻¹ for 1 and 2, respectively. Cyclic voltammograms were obtained for both complexes with large variations observed due to the differences in ligand charge and coordination.     

Mixed metal cyanide complexes derived from the CpCo(CN)3 anion

Reaction of the salt KCpCo(CN)₃ (1) with zinc iodide leads to the formation of a highly insoluble Co(III)/Zn(II) polymeric chain. However, pyridine was found to disrupt the aggregate that is formed to yield a crystalline trimetallic complex consisting of two CpCo(CN)₃ anions bridging a Zn(py)₄ dication through the cyanide ligands, [CpCo(CN)₂(μ-CN)]₂Zn(py)₄ (2). Along these same lines, reaction of CpCo(CN)₂PPh₃ (3) with AlCl₃ or CoCl₂ leads to the formation of a highly crystalline Co(II)/Co(III) diamond, [CpCo(PPh₃)(μ-CN)₂CoCl₂]₂ (4). Molecular structures of 1, 2, 3 and 4 were determined by single-crystal X-ray crystallography.     

Synthesis, characterization and supramolecular structures of two Ni(II) complexes with potentially heptadentate ligand N,N-bis(2-hydroxybenzyl)-1,3-bis[(2-aminoethyl)amino]-2-propanol

A potentially heptadentate ligand H₃L (N,N^′-bis(2-hydroxybenzyl)-1,3-bis[(2-aminoethyl)amino]-2-propanol) and its two Ni(II) complexes, [Ni(H₂L)H₂O](H₂O)₃ClO₄ (1) and [Ni(H₂L)(H₂O)](H₂O)Cl (2) were prepared and characterized. X-ray structural analyses indicate that complex 1 has a distorted octahedral coordination geometry, with four amine N atoms of H₂L⁻ defining the equatorial plane, one aqua O atom and one phenoxo O atom of the ligand occupying two axial positions, respectively. The Ni(II) center of 2 has coordination geometry similar to that of 1. IR and electronic spectra of 1 and 2 are in agreement with their crystal structural features. Approximately along the ab plane, 2D supramolecular structure of 1 is assembled through multiple hydrogen bonds between hydroxy groups of the ligands, coordinated and crystal lattice H₂O and π-π stacking interactions between adjacent phenyl rings of the ligands, while for that of 2, probably along the a axis, 1D chain structure is also formed by multiple hydrogen bonds, but lack of π-π stacking interactions.     

[Ni(L)(MeCN)]complex cation as a template for the assembly of extended I3 · I5 and I5 · I7 polyiodide networks {L=2,5,8-trithia[9](2,9)-1,10-phenanthrolinophane}. Synthesis and structures of [Ni(L)(MeCN)]I8 and [Ni(L)(MeCN)]I12

The compounds [Ni(L)(MeCN)]I₈ (1) and [Ni(L)(MeCN)]I₁₂ (2) have been obtained from the reactions of the complexes [Ni(L)(L^′)][BF₄]_(2 + n) {L=2,5,8-trithia[9](2,9)-1,10-phenanthrolinophane; L^′=MeCN, Cl⁻, Br⁻, I⁻; n=charge of L^′} with an excess of I₂ (molar ratios of 6, 10 and 20 have been used), in the presence of the stoichiometric amount of I⁻ (as Bu₄ⁿNI) necessary to balance the charge of the complex cation [Ni(L)(L^′)]^(2 + n)+. An X-ray diffraction analysis shows that, independently of the nature of L^′, both 1 and 2 contain the complex cation [Ni(L)(MeCN)]²⁺, which is therefore capable of templating two different polyiodide networks based on interacting I₃⁻/I₅⁻ and I₅⁻/I₇ units, respectively. The solid state FT-Raman spectra of 1 and 2 are discussed based on their structural features.     

Development of HBsAg-Binding Aptamers that bind HepG2.2.15 cells via HBV surface antigen

Hepatitis B virus surface antigen(HBsAg),a specific antigen on the membrane of Hepatitis B virus (HBV)-infected cells,provides a perfect target for therapeutic drugs.The development of reagents with high affinity and specificity to the HBsAg is of great significance to the early-stage diagnosis and treatment of HBV infection.Herein,we report the selection of RNA aptamers that can specifically bind to HBsAg protein and HBsAg-positive hepatocytes.One high affinity aptamer,HBs-A22,was isolated from an initial ...     

Cryoprotection in dampwood termites (Termopsidae, Isoptera)

In contrast to the majority of the Order, the dampwood termites of the family Termopsidae found in colder regions can experience frost and snow, either in cool temperate areas at high latitudes (45°), or alpine areas at high elevations (>1000 m). This suggests that dampwood termites are adapted to cold climates. We investigated this hypothesis in two dampwood termites, Porotermes adamsoni Froggatt and Stolotermes victoriensis Hill. We measured nest temperatures and atmospheric temperatures of their alpine habitat during winter, and measured survival and recovery at subzero temperatures. We also determined the minimum temperature at which these species remain active and the LT50 values. We used a novel gas chromatographic strategy to examine eight metabolites from individuals of both species collected in winter and summer to identify possible cryoprotectants. Both P. adamsoni and S. victoriensis had significantly higher levels of trehalose, a known cryoprotectant, in winter than in summer; in addition S. victoriensis also had higher levels of unsaturated fatty acid ligands in winter than in summer, consistent with patterns observed for cold adaptation in other organisms. These results are the first to reveal that dampwood termites are adapted to cold climates and use trehalose and unsaturated lipids as cryoprotectants.     

Synthesis and structural characterisation of the lead-platinum sulfido aggregates [Pt2(μ-S)2(PPh3)4PbX2] (X = Br, I); promotion of rare tetrahedral geometry for lead(II)

The reactions of [Pt₂(μ-S)₂(PPh₃)₄] with excess PbBr₂ or PbI₂ in methanolic suspension result in the formation of the neutral lead(II) halide adducts [Pt₂(μ-S)₂(PPh₃)₄PbX₂] (X = Br, I). The X-ray structure determination of the lead iodide adduct reveals an essentially tetrahedral lead(II) centre, which is a rare coordination geometry for lead(II), which almost invariably is hemidirected, with a stereochemically active lone pair. In contrast, the structure of the PbBr₂ adduct, although suffering from some disorder, shows a more typical, distorted arrangement of ligands; these results are discussed in terms of the tendency for soft, bulky ligands to promote symmetric, holodirected geometries. The ESI mass spectra of the adducts are reported, and yield [M−halide]⁺ ions.     

Reactivity of a new family of diamido-diamine cyclam-based zirconium complexes in ethylene polymerization

Compounds of general formula [(^∗Bn₂Cyclam)ZrCl₂] (^∗Bn = 4-^tBuC₆H₄CH₂, (4) and 4-CF₃C₆H₄CH₂, (5)) were synthesised using Zr(CH₂SiMe₃)₂Cl₂(Et₂O)₂ and the corresponding ligand precursors 1,8-(4-^tbutylbenzyl)-1,4,8,11-tetraazacyclotetradecane (H₂(4-^tBuBn)₂Cyclam), (4a), and 1,8-(4-trifluoromethylbenzyl)-1,4,8,11-tetraazacyclotetradecane (H₂(4-CF₃Bn)₂Cyclam), (5a). Complexes 4 and 5, in addition to other [(^∗Bn₂Cyclam)ZrCl₂] compounds previously described by some of us (^∗Bn = PhCH₂, (1), 3,5-Me₂C₆H₃CH₂, (2) and 3,5-^tBu₂C₆H₃CH₂, (3)) were tested in the polymerization of ethylene in the presence of MAO. System 4/MAO presents the highest activity (2790 g PE molZr⁻¹ h⁻¹ atm⁻¹). The polymers formed are slight to moderately branched polyethylenes with a percentage of branching ranging between 1.2% and 3.3%. The melting points obtained by differential scanning calorimetry (DSC) ranging from 128 to 140 °C, are consistent with rather high average molecular weight polymers with crystallinity close to 50%.     

Aryldiazenido derivatives: A new entry to the functionalization of Keggin polyoxometalates

A series of aryldiazenido polyoxomolybdates of the type (nBu₄N)₂[Mo₅O₁₃(OMe)₄(NNAr){Na(MeOH)}] (Ar = C₆F₅, 1; Ar = O₂N-o-C₆H₄, 2; Ar = O₂N-m-C₆H₄, 3; Ar = O₂N-p-C₆H₄, 4a; Ar = (O₂N)₂-o,p-C₆H₃, 5) have been obtained by controlled degradation of the parent compounds (nBu₄N)₃[Mo₆O₁₈(NNAr)] with NaOH in methanol. They have been characterized by elemental analysis and UV-Vis and IR spectroscopy. In addition, 4a has been characterized by ⁹⁵Mo NMR spectroscopy and the crystal structure of (nBu₄N)₂[Mo₅O₁₃(OMe)₄(NNC₆H₄-p-NO₂){Na(H₂O))]·H₂O (4b) has been determined by X-ray diffraction. The molecular structure of the anion of 4b features a lacunary Lindqvist-type anion [Mo₅O₁₃(OMe)₄(NNC₆H₄-p-NO₂)]³⁻ interacting with a sodium cation through the four terminal axial oxygen atoms. The 1:1 sodium complexes react with BaCl₂ and BiCl₃ to yield 2:1 complexes which have been isolated as (nBu₄N)₄[Ba{Mo₅O₁₃(OMe)₄(NNAr)}₂] (Ar = C₆F₅, 6; Ar = O₂N-p-C₆H₄, 7) and (nBu₄N)₃[Bi{Mo₅O₁₃(OMe)₄(NNAr)}₂] (Ar = C₆F₅, 8; Ar = O₂N-p-C₆H₄, 9). X-ray crystallography analysis of 9·Me₂CO has shown that the tetradentate [Mo₅O₁₃(OMe)₄(N₂C₆H₄-p-NO₂)]³⁻ anions provide a square-antiprismatic environment for Bi. In contrast, IR spectroscopy provides evidence for a square-prismatic environment of Ba in 6 and 7. In acetonitrile-methanol mixed solvent, [Mo₅O₁₃(OMe)₄(NNAr)]³⁻ and [PW₁₁O₃₉]⁷⁻, generated in situ by alkaline degradation of their respective parents, [Mo₆O₁₈(NNAr)]³⁻ and [PW₁₂O₄₀]³⁻, react together to give the Keggin-type diazenido compounds (nBu₄N)₄[PW₁₁O₃₉(MoNNAr)] (Ar = O₂N-o-C₆H₄, 10; Ar = O₂N-m-C₆H₄, 11; Ar = O₂N-p-C₆H₄, 12), which have been characterized by ³¹P and ¹⁸³W NMR spectroscopy.