Reproductive system morphology of Lightiella magdalenina (Crustacea,Cephalocarida): functional and adaptive implications

The reproductive systems of adults and larvae of Lightiella magdalenina were examined. Lightiella magdalenina, similar to the best-known cephalocarida species Hutchinsoniella macracantha, is a simultaneous hermaphrodite. Although the morphology of their reproductive system is similar, L. magdalenina differs from H. macracantha in exhibiting reduced fecundity: it lays one egg, not two, per reproductive event. This is due to asynchronous development of the oocytes inside the paired female reproductive structures, which determines the maturation of a single egg at a time. The reduced fecundity of L. magdalenina could be offset by the precocious release of oocytes from the germarium, which begins the vitellogenetic process during the last larval stages. Due to this process, after their last moult, reproductive adults can have a large number of advanced vitellogenic oocytes, reducing the time required for their maturation. A possible adaptive relationship between the halved fecundity with pre- and post-hatching parental care is discussed.     

Sex differences in the antecedents of animal use attitudes

Abstract

Sex differences in attitudes toward the use of animals have been reported in previous research. This study examines sex differences in the levels of, and the interrelations among, three potential antecedents of attitudes toward animal use: caring value orientation, pet care experience and attachment to pets. Path analysis showed that pet care experience, through attachment to pets, accounted for a significant portion of variance in animal use attitudes in both males and females. Caring value orientation was directly linked to animal use attitudes in females, but in males, caring value orientation affected attachment to pets, which in turn impacted on animal use attitudes. Results are discussed in terms of Gilligan's theory of socialization.     

Personalized diagnostics and biosensors: a review of the biology and technology needed for personalized medicine

Abstract

Exploiting the burgeoning fields of genomics, proteomics and metabolomics improves understanding of human physiology and, critically, the mutations that signal disease susceptibility. Through these emerging fields, rational design approaches to diagnosis, drug development and ultimately personalized medicine are possible. Personalized medicine and point-of-care testing techniques must fulfill a host of constraints for real-world applicability. Point-of-care devices (POCDs) must ultimately provide a cost-effective alternative to expensive and time-consuming laboratory tests in order to assist health care personnel with disease diagnosis and treatment decisions. Sensor technologies are also expanding beyond the more traditional classes of biomarkers – nucleic acids and proteins – to metabolites and direct detection of pathogens, ultimately increasing the palette of available techniques for the use of personalized medicine. The technologies needed to perform such diagnostics have also been rapidly evolving, with each generation being increasingly sensitive and selective while being more resource conscious. Ultimately, the final hurdle for all such technologies is to be able to drive consumer adoption and achieve a meaningful medical outcome for the patient.     

Functional tooth units and nutritional status of older people in care homes in Indonesia

Gerodontology 2012; doi: 10.1111/j.1741‐2358.2012.00673.x Functional tooth units and nutritional status of older people in care homes in Indonesia Objectives: To investigate the relationship between functional tooth units (FTUs) and nutritional status. Methods: One hundred females (mean age: 72.4 ± 8.2 years) at four private care homes in Jakarta, Indonesia were interviewed and clinically examined. The oral examination included the assessment of teeth, prosthetic status, and number of FTUs. The total number of FTUs was further divided by tooth composition: natural tooth against natural tooth (NN‐FTUs), natural tooth against denture (ND‐FTUs), and denture against denture (DD‐FTUs). Nutritional status was evaluated using the body mass index (BMI) and the Mini Nutritional Assessment (MNA). Results: The mean numbers of teeth present, NN‐FTUs, ND‐FTUs, DD‐FTUs, and total FTUs were 13.1 ± 10.4, 1.7 ± 3.0, 1.2 ± 3.3, 0.4 ± 1.2 and 3.3 ± 4.4, respectively. The mean BMI and MNA scores were 24.8 ± 5.0 and 22.6 ± 2.8, respectively. Subjects with a normal BMI had a significantly higher total number of FTUs (3.6 ± 4.6) compared with underweight subjects (0.1 ± 0.3). Subjects with a normal MNA had a significantly higher number of NN‐FTU (2.6 ± 3.7) compared to those who were at risk or in a state of under‐nutrition (1.2 ± 2.4). Conclusion: This study revealed significant relationships between the number of FTUs and nutritional status. Keeping the posterior occlusion should be emphasized in order to maintain good nutritional status in older subjects.     

THE EFFECTS OF EXTENDED WORKING HOURS ON HEALTH AND SOCIAL WELL-BEING—A COMPARATIVE ANALYSIS OF FOUR INDEPENDENT SAMPLES

Using structural equation modeling, it can be shown that long weekly working hours and work on weekends, nights, and in shifts have detrimental effects on psychovegetative health. Employees' reported subjective work-life balance also decreases with increasing number of hours worked/week, days worked on weekends, or at nights, and with working shifts. A decrease in work-life balance in turn increases the risk of psychovegetative impairments (PVIs). Thus, long and unusual working hours increase the risk of psychovegetative health impairments both directly and indirectly, moderated by the subjective work-life balance. In fact, the indirect effects of working time on PVIs via the work-life balance seem to be stronger than the direct effects. Results of a cross-validation study of four independent and representative samples from Germany and the European Union (N?>?50,000) indicate high structural stability of these results and thus an increased validity and range for generalization. (Author correspondence: anna.wirtz@gawo-ev.de)     

Working on Sundays–Effects on Safety,Health, and Work-life Balance

Several attributes of the work schedule can increase the risk of occupational injuries and accidents, health impairments, and reduced social participation. Although previous studies mainly focused on the effects of shiftwork and long working hours on employee health and safety, there is little evidence of a potential negative impact of working Sundays on the incidence of occupational accidents, health impairments, and work-life balance. A representative sample of employed workers in 31 member and associated states of the European Union (n?=?23,934) served as the database for a cross-sectional analysis. The sample was collected via face-to-face interviews in the year 2005. The association of the risks of occupational accidents, health impairments, and decreases in work-life balance with working Sundays was calculated using logistic regression models, controlling for potential confounders, such as shiftwork, workload, and demographic characteristics. The results indicated that working one or more Sundays/month was associated with increase both in the risk of reporting one or more health impairments (odds ratio [OR]: 1.17, 95% confidence interval [CI]: 1.06–1.29) and poorer work-life balance (OR: 1.15, 95% CI: 1.02–1.28). These effects remained after controlling for potentially confounding factors, such as other work schedule attributes, intensity of physical and mental workload, and individual characteristics. Furthermore, working Sundays was also related to increased risk of occupational accidents within the last year (OR: 1.34, 95% CI: 1.03–1.73). Controlling again for individual, workload, and working-time characteristics, a significant association with accident risk, however, remained only in work sectors with low a priori risk of occupational accidents (OR: 1.40, 95% CI: 1.02–1.91), although the increased risk could be observed for both medium and high a priori risk sectors working Sundays (without controlling for additional confounders). The results thus indicate that the detrimental effects of working Sundays on safety, health, and social well-being should be taken into account when designing work schedules. The potential hazards to employees' safety, health, and work-life balance, in particular, should be considered in discussions concerning extending work on Sundays in certain sectors, e.g., retail. (Author correspondence: awirtz@hsph.harvard.edu)     

9. LIST OF MEMBERS (as at date of publication)

We studied the breeding ecology of the Chestnut-backed Sparrowlark Eremopterix leucotis over three years between 2008 and 2010. The breeding season was bimodal with a main peak in laying in autumn (March–April) and another smaller peak in spring (September–October). Nest microhabitat analyses showed they prefer nesting in open areas with lots of bare ground (median 67.5%). Nest entrance directions were biased towards the south (mean vector (µ) = 186.44°). The majority of nests (78.2%) had an apron at the nest entrance. The mean clutch size was 1.88 but there was geographic variation in clutch size between northern and southern races of the species. The mean incubation and nestling periods were 10.33 d (range 10–11 d) and 9.20 d (range 8–10 d), respectively. The results suggest that parental contributions during incubation are almost equal, but females made significantly more food deliveries during the nestling period compared to males. The diet of nestlings comprised mainly of invertebrates (50.2%), seeds (34.4%) and unidentified food items (15.4%). Breeding success was low, averaging 16.1% (range 8.1–20.6%), and the average number of fledged young per pair was 0.36 ± 0.71. Replacement broods were common and we also recorded repeat brooding attempts.     

Description of the larvae of Dicronocephalus wallichi bourgoini Coleoptera: Scarabaeidae: Cetoniinae) with observations on nesting behavior and life cycle of two Dicronocephalus species under laboratory conditions

Larva of the fruit beetle Dicronocephalus wallichi bourgoini Pouillaude 1914 is described and illustrated. The following unique morphological characters within Cetoniinae are discussed: shape of claw, spindle-shaped last antennomera, general body shape. The presence of metathoracic egg-bursters in the first instar larva has been found. Its significance for distinguishing the first instar larvae of Cetoniinae is discussed. The nesting behaviours of D. wallichi bourgoini and D. adamsi(Pascoe 1863) are described. The course of the life cycle of both species under laboratory condition is presented and discussed.