Preparation of capacitor’s electrode from sunflower seed shell

Series of nanoporous carbons are prepared from sunflower seed shell (SSS) by two different strategies and used as electrode material for electrochemical double-layer capacitor (EDLC). The surface area and pore-structure of the nanoporous carbons are characterized intensively using N₂ adsorption technique. The results show that the pore-structure of the carbons is closely related to activation temperature and dosage of KOH. Electrochemical measurements show that the carbons made by impregnation-activation process have better capacitive behavior and higher capacitance retention ratio at high drain current than the carbons made by carbonization-activation process, which is due to that there are abundant macroscopic pores and less interior micropore surface in the texture of the former. More importantly, the capacitive performances of these carbons are much better than ordered mesoporous carbons and commercial wood-based active carbon, thus highlighting the success of preparing high performance electrode material for EDLC from SSS.     

厚壳贻贝whirlin类贝壳基质蛋白的重组表达与功能分析

贝壳历来是生物工程和材料学研究的重要对象。贝壳中的贝壳基质蛋白质在贝壳的形成与发育过程中具有重要的调控作用。Whirlin类蛋白质(Whirlin-like protein,WLP)是一种从厚壳贻贝(Mytilus coruscus)中鉴定的新型贝壳基质蛋白质。序列分析结果显示,该蛋白质含有PDZ(postsynaptic density/Discs large/Zonula occludens)结构域,而该结构域对贝壳生物矿化的影响目前尚无报道。为深入了解WLP在贝壳形成中对碳酸钙晶体的影响,在序列分析基础上,采用密码子优化结合原核重组表达,获得其重组表达产物后,开展了重组WLP对碳酸钙晶体形貌及晶型的影响研究,结晶速度抑制以及碳酸钙晶体结合分析。分析结果表明,重组WLP能诱导文石型碳酸钙晶体的形貌和方解石型碳酸钙晶体的晶型发生改变;同时重组WLP对碳酸钙晶体具有结合作用,且能抑制碳酸钙晶体的结晶速度。上述结果表明,WLP对贝壳的形成及发育具有重要影响,并可能在贝壳肌棱柱层的形成中发挥了重要作用。     

Pulling or drilling, does size or species matter? An experimental study of prey handling in Octopus dierythraeus ()

The influence of both predator and prey size on the shift from a pulling to a drilling predatory response was examined in the intertidal octopus Octopus dierythraeus, using an experimental program. Additionally, selective drilling, where particular regions of the prey are targeted, was examined for a variety of bivalve and gastropod prey. O. dierythraeus always initially attempted to pull bivalves apart. Shells that were eventually drilled were always subjected to significantly more pulling attempts than those that could be pulled apart, indicating that octopus are willing to expend more energy to access the flesh quickly. There was no defined threshold where bivalve size caused an octopus to switch from a pulling to a drilling response. Instead, there was a broad size range where the octopus could adopt either handling method and it varied for each individual. Octopus may only able to pull open bivalves before the molecular ratchet or ‘catch’ mechanism that many bivalves possess is engaged. This might explain the lack of a relationship between either octopus or bivalve size and the success of pulling, as it is likely that when the bivalves were presented to individual octopus they were either setting the ‘catch’ mechanism, or had already engaged it. O. dierythraeus demonstrated selective drilling on a variety of molluscan prey, with penetration sites differing between prey species. O. dierythraeus targeted the valve periphery, which was the thinnest part of the shell, therefore minimizing handling time. O. dierythraeus always drilled gastropods, but did not target the thinnest regions of the shells, with drill site varying according to the morphology of the prey. Elongate species with pronounced aperture lips were drilled in the apical region, close to the columella on the side of the opercula whereas nonelongate species were drilled immediately above the aperture. The location of drilling sites may represent a trade-off between targeting the most effective places to inject paralyzing secretions and the mechanically simplest places to drill.     

Lysine-derived cross-links in the egg shell membrane

Egg shell membrane protein contains significant quantities of the lysine-derived aldehyde, allysine, and its aldol condensation product. NaB³H₄ reduction followed by alkaline hydrolysis of purified protein revealed that there were six residues/1000 of both allysine and the reduced aldol while only traces of desmosine and isodesmosine were detected. The amino acid composition of the membrane protein did not resemble that of mammalian elastin.     

Embryonic Ammonoid Shell Features: Intraspecific Variation Revisited

Two samples of ammonoids belonging to the Oppeliidae, Sublunuloceras virguloidesHecticoceras (Brightii) canaliculatum, are analyzed to estimate the intraspecific variability of embryonic shell features. The study of embryonic shell characters reveals two main shapes of protoconch, flattened and round. Prosiphons may be straight or slightly curved. New parameters for area are added to the linear parameters commonly found in the literature. Prosiphon length and caecum area vary greatly whereas protoconch and ammonitella diameter vary only slightly, and the ammonitella angle is almost constant. The protoconch-to-ammonitella size ratio behaves differently in each species, suggesting different patterns of embryonic growth. We compare our results with published data and discuss their significance for species determination and ontogenetic interpretation. The main finding is that intraspecific embryonic variation is greater than was previously believed.     

Microgeographical variation in shell size of the land snail Chondrina clienta

Microgeographical variation in shell morphology of the rock-dwelling land snail Chondrina clienta , collected from 30 sites within an area of 0.5 km² on the island of Öland, Sweden, was examined in relation to its own population density and that of a potential competitor (the land snail Balea perversa ) and to environmental factors. Dispersal of marked individuals averaged 83 cm per year within a stone pile and 291 cm in an area of exposed bedrock. Local population density of active C. clienta ranged from 5 to 794 individuals per m². Shell characters were highly intercorrelated, both within and between populations. Principal component analysis revealed that most of the interpopulational variation could be expressed by the single character of shell height, which ranged from 5.54 to 6.94 mm. In all populations, snails of a given size had the same whorl number. Shell size was not influenced by habitat type (exposed rock surface, stone pile or stone wall) or proportion of calcareous stones within habitat. It was, however, negatively correlated with local population density, indicating intraspecific competition, and positively correlated with the degree of plant cover within the habitat. Analysis of variance revealed additionally a density effect of B. perversa on shell size in C. clienta , probably as a result of interspecific competition. Breeding experiments using C. clienta from different sites and carried out under unifrom conditions caused most of the phenotypic variation to disappear, demonstrating the high phenotypic plasticity of the species.     

Ecological aspects of a silicified bivalve fauna from the Silurian of Gotland

The silicified Wenlockian (Silurian) bivalve fauna from MÖllbos, Gotland, is part of a life assemblage. The vast number of shells show unusual phenomena, e.g. shell repair, pearl and tumour formation, etc. A number of shells contain epibionts and bored, round holes. Presumptive predators of the bivalve community are discussed. Size-frequency distribution of the two most abundant species possibly reflects age classes. The fauna, comprising eleven species, is dominated by deposit-feeders (90 %). They exhibit niche diversification, including at least three different feeding levels within the sediment.     

Morphology and aestivation behaviour in some Madagascan acavid land snails

Nine species of Madagascan acavid land snails were compared in a phylogenetic context. The two most plesiomorphic, Clauator johnsoni and C. moreleti, differ from the others by their high-spired shells, short tentacles, short tails, long necks, and crawling mode of hitching the shell along the ground. In the seven more apomorphic species, the crawling mode is smooth, with the shell resting on the tail, and the relative lengths of tail and shell correlate significantly. Among these seven species, three pairs of closest relatives (Helicophanta petiti and H. uesicalis, H. farafanga and H. souuerbiana, Ampeltta decaryi and A. julii) show evidence of phylogenetic constraints on ranked shell size. Aestivation site (as tentatively inferred from rare data) does not correlate with shell shape or size: burrowers have H/D = 2.7 to 0.6 and D = 70 to 25 mm; arboreals have H/D = 0.8 to 0.5 and D = 70 to 30 mm; the species with both the highest spire and the smallest diameter (C. moreleti) is neither a burrower or an arboreal, but stays on the ground surface. Inferred aestivation sites are randomly distributed phylogenetically. Climate shows no correlation, except that the arborcals are only from humid to wet regimes. Uniform shell colouration occurs only in burrowers (C. johnsoni, H. petiti, H. uestcalis), but disruptive shell colouration occurs in all others, including burrowers (H. farafanga, A. decaryt), ground-surface aestivators (C. moreleti), arboreals (H. souuerbiana, A. julii), and semi-arboreals (Ampefita subfunebris). Among all nine species, burrowers have significantly thicker shells (than their close relatives of similar size), wider bodies, and longer snouts than non-burrowers (H. souuerbiana is exceptional in being arboreal despite its huge size and in having the broad foot and snout of a burrower). Thus, although there is some evidence for phylogenetic constraints, natural selection for aestivation and crawling behaviours seems to have dominated the evolution of external body morphology and of shell thickness (but not shell size and shape) in these snails.     

Effects of the egg incubation environment on turtle carapace development

Developing organisms are often exposed to fluctuating environments that destabilize tissue-scale processes and induce abnormal phenotypes. This might be common in species that lay eggs in the external environment and with little parental care, such as many reptiles. In turtles, morphological development has provided striking examples of abnormal phenotypic patterns, though the influence of the environment remains unclear. To this end, we compared fluctuating asymmetry, as a proxy for developmental instability, in turtle hatchlings incubated in controlled laboratory and unstable natural conditions. Wild and laboratory hatchlings featured similar proportions of supernumerary scales (scutes) on the dorsal shell (carapace). Such abnormal scutes likely elevated shape asymmetry, which was highest in natural nests. Moreover, we tested the hypothesis that hot and dry environments cause abnormal scute formation by subjecting eggs to a range of hydric and thermal laboratory incubation regimes. Shape asymmetry was similar in hatchlings incubated at five constant temperatures (26–30°C). A hot (30°C) and severely Dry substrate yielded smaller hatchlings but scutes were not overtly affected. Our study suggests that changing nest environments contribute to fluctuating asymmetry in egg-laying reptiles, while clarifying the conditions at which turtle shell development remains buffered from the external environment.     

三角帆蚌Hc-GSK3β基因鉴定及内壳色性状相关SNP筛选

为了探究三角帆蚌(Hyriopsis cumingii)糖原合成激酶-3β(GSK3β)基因对壳色的影响,研究采用RACE技术获得Hc-GSK3β基因cDNA全长1867 bp,其中包含1261 bp的ORF区编码420个氨基酸, ORF中含有一个S＿TKc结构域,该结构域序列高度保守。组织差异表达分析发现Hc-GSK3β基因在紫色蚌鳃、斧足、内脏团和边缘膜组织中表达量高于白色蚌的表达量(P<0.05),且在斧足和边缘膜表达差异水平达到极显著(P<0.01),而在紫色蚌闭壳肌组织中表达量显著低于白色蚌(P<0.05)。原位杂交(ISH)实验结果显示在三角帆蚌外套膜的外褶、中褶、內褶、背膜区和腹膜区均有阳性信号产生,且在外褶的信号表达较强烈。该基因经重测序比较,共鉴定出6个SNP位点,其中在C+185A位点的CA基因型在紫色蚌的分布频率显著高于白色三角帆蚌(P<0.05);在紫色蚌中, T+341G位点TT基因型三角帆蚌内壳颜色参数b值显著低于TG基因型(P<0.05)。研究表明, Hc-GSK3β基因参与了三角帆蚌壳色形成,筛选的SNP标记可用于三角帆蚌壳...