Direct assessment of symbiotically fixed nitrogen in the rhizosphere of alfalfa

Rhizodeposition has been proposed as one mechanism for the accumulation of significant amounts of N in soil during legume growth. The objective of this experiment was to directly quantify losses of symbiotically fixed N from living alfalfa (Medicago sativa L.) roots to the rhizosphere. We used ¹⁵N-labeled N₂ gas to tag recently fixed N in three alfalfa lines [cv. Saranac, Ineffective Saranac (an ineffectively nodulated line), and an unnamed line in early stages of selection for apparent N excretion] growing in 1-m long polyvinylchloride drainage lysimeters in loamy sand soil in a greenhouse. Plants were in the late vegetative to flowering growth stage during the 2-day labelling period. We determined the fate of this fixed N in various plant organs and soil after a short equilibration period (2 to 4 days) and after one regrowth period (35 to 37 days). Extrapolated N₂ fixation rates (46 to 77g plant^–1 h^–1) were similar to rates others have measured in the field. Although there was significant accretion of total N in rhizosphere compared to bulk soil, less than 1% was derived from newly fixed N and there were no differences between the excreting line and Saranac. Loss of N in percolate water was small. These results provide the first direct evidence that little net loss of symbiotically-fixed N occurs from living alfalfa roots into surrounding soil. In addition, these results confirm our earlier findings, which depended on indirect ¹⁵N labelling techniques. Net N accumulation in soil during alfalfa growth is likely due to other processes, such as decomposition of roots, nodules, and above ground litter, rather than to N excretion from living roots and nodules.     

Gene transfer to inflorescence and flower meristems using ballistic micro-targeting

Direct gene transfer to floral meristems could contribute to cell-fate mapping, to the study of flower-specific genes and promoters, and to the production of transgenic gametes via the transformation of sporogenic tissues. Despite the wide potential of its applications, direct gene transfer to floral meristems has not been achieved so far because of the lack of suitable technology. We show in this paper that ballistic micro-targeting is the technique of choice for this purpose, and in this way, we were able to transfer genes efficiently into excised wheat immature spikes. Particle size was adjusted for optimal penetration into the L1 and L2 cell layers of the spikes with limited cell damage. Spikes at different developmental stages were shot either with a plasmid containing two genes involved in anthocyanin biosynthesis or with a plasmid bearing the uidA (-glucuronidase) gene. The transient expression of these marker genes was observed in the different developmental stages tested and in cells of both the L1 and the L2 layers. The transient expression of the uidA gene was significantly increased when the sucrose concentration in the culture medium was increased from 0.06 to 0.52 M. At the highest concentration, 100% of the targeted spikes expressed the uidA gene, with an average of 69 blue cells per spike. Twelve days after microtargeting, multicellular sectors showing transgene expression and containing up to 17 cells were found in 85% of the shot immature inflorescences. This indicated that targeted cells survived particle bombardment. Sectors were found in primordia of both vegetative and reproductive organs.     

Reflections on biosystems motivating supramolecular engineering

Some goals of bioelectronics—interfacing biology and electronics — are the understanding of supramolecular bioprocesses and the construction of supramolecular devices. The principles for the design and fabrication of machineries with functional components of molecular size are inspired by reflecting on biosystems, and it seems important to consider such principles. We first discuss attempts to construct supramolecular machines, and then we consider the bacterial reaction centre as an example where supramolecular engineering helps to elucidate a bioprocess. We then discuss possible mechanisms leading to the emergence of life-like systems in the light of the basic principles used to design supramolecular devices. Finally, we reflect on prospects in molecular engineering inspired by studying the emergence of life-like systems.     

Probing protein-cofactor interactions in the terminal oxidases by second derivative spectroscopy: study of bacterial enzymes with cofactor substitutions and heme A model compounds.

Second derivative absorption spectra are reported for the aa3-cytochrome c oxidase from bovine cardiac mitochondria, the aa3-600 ubiquinol oxidase from Bacillus subtilis, the ba3-cytochrome c oxidase from Thermus thermophilis, and the aco-cytochrome c oxidase from Bacillus YN-2000. Together these enzymes provide a range of cofactor combinations that allow us to unequivocally identify the origin of the 450-nm absorption band of the terminal oxidases as the 6-coordinate low-spin heme, cytochrome a. The spectrum of the aco-cytochrome c oxidase further establishes that the split Soret band of cytochrome a, with features at 443 and 450 nm, is common to all forms of the enzyme containing ferrocytochrome a and does not depend on ligand occupancy at the other heme cofactor as previously suggested. To test the universality of this Soret band splitting for 6-coordinate low-spin heme A systems, we have reconstituted purified heme A with the apo forms of the heme binding proteins, hemopexin, histidine-proline-rich glycoprotein and the H64V/V68H double mutant of human myoglobin. All 3 proteins bound the heme A as a (bis)histidine complex, as judged by optical and resonance Raman spectroscopy. In the ferroheme A forms, none of these proteins displayed evidence of Soret band splitting. Heme A-(bis)imidazole in aqueous detergent solution likewise failed to display Soret band splitting. When the cyanide-inhibited mixed-valence form of the bovine enzyme was partially denatured by chemical or thermal means, the split Soret transition of cytochrome a collapsed into a single band at 443 nm.(ABSTRACT TRUNCATED AT 250 WORDS)     

A “parallel plate” electrostatic model for bimolecular rate constants applied to electron transfer proteins

A “parallel plate” model describing the electrostatic potential energy of protein-protein interactions is presented that provides an analytical representation of the effect of ionic strength on a bimolecular rate constant. The model takes into account the asymmetric distribution of charge on the surface of the protein and localized charges at the site of electron transfer that are modeled as elements of a parallel plate condenser. Both monopolar and dipolar interactions are included. Examples of simple (monophasic) and complex (biphasic) ionic strength dependencies obtained from experiments with several electron transfer protein systems are presented, all of which can be accommodated by the model. The simple cases do not require the use of both monopolar and dipolar terms (i.e., they can be fit well by either alone). The biphasic dependencies can be fit only by using dipolar and monopolar terms of opposite sign, which is physically unreasonable for the molecules considered. Alternatively, the high ionic strength portion of the complex dependencies can be fit using either the monopolar term alone or the complete equation; this assumes a model in which such behavior is a consequence of electron transfer mechanisms involving changes in orientation or site of reaction as the ionic strength is varied. Based on these analyses, we conclude that the principal applications of the model presented here are to provide information about the structural properties of intermediate electron transfer complexes and to quantify comparisons between related proteins or site-specific mutants. We also conclude that the relative contributions of monopolar and dipolar effects to protein electron transfer kinetics cannot be evaluated from experimental data by present approximations.     

Recovery of transgenic trees after electroporation of poplar protoplasts

Protoplasts from leaflets ofin vitro cuttings were electroporated in osmotically adjusted and buffered solutions containing plasmid DNA: pABD1, carrying thenptII gene for resistance to neomycin; pGH1, carrying a mutant acetolactate synthase gene,als, for resistance to sulfonylurea; and pGSFR781A, carrying a synthetic phosphinothricin acetyltransferase (pat) for resistance to phosphinothricin (Basta). Gene transfer was repeatedly efficient, without use of carrier DNA, in the range of one transformant for 10⁵ to 10⁴ protoplast-derived cell colonies. This was probably due to the high plating efficiency (30%) of protoplasts in our culture process. Selection for expression of foreign genes was applied in liquid medium and repeatedly achieved with 30 M paromomycin for NPTII, 200 nM chlorsulfuron for the mutant ALS ofArabidopsis and 25 M phosphinothricin for PAT expression. Integration of foreign genes into genomic DNA of resistant poplar trees was demonstrated by Southern blot hybridizations, which revealed that for some transformants practically no other part of the vector plasmid than the selected gene was integrated.Effective processes for protoplast culture, efficient selection at the cell colony stage and gene transfer will provide new possibilities in poplar breeding.     

Metabolic engineering of plant secondary products

Plants interact with their environment by producing a diverse array of secondary metabolites. Many of these compounds are valued for their medicinal, industrial or agricultural properties. Other secondary products are toxic or otherwise undesirable and can reduce the commercial value of crops. Gene transfer technology offers new opportunities to modify directly plant secondary product synthesis through metabolic engineering. This article reviews some of the strategies which have been used to increase or decrease the synthesis of specific plant metabolites, as well as methods for expanding the biosynthetic capabilities of individual species.     

Opportunities for gene transfer from transgenic oilseed rape (Brassica napus) to related species

Before novel transgenic plant genotypes are grown outside containment facilities and evaluated under field conditions, it is necessary to complete a risk assessment to consider the possible consequences of that release. An important aspect of risk assessment is to consider the likelihood and consequences of the transgene being transferred by cross-pollination to related species, including other crops, weeds and ruderal populations. The purpose of this report is to review the literature to assess the ease with whichBrassica napus can hybridize with related species. The evidence for hybridization is considered at three levels: a) by open pollination, b) by hand pollination and c) by the use ofin vitro ovule and embryo rescue techniques; and also examines the fertility and vigour of the F₁, F₂ and backcross generations. Four species are reported to hybridize withB. napus by open pollination:B. rapa andB. juncea using fully fertile parents; andB. adpressa andR. raphanistrum using a male-sterileB. napus parent. Seventeen species are reported to form hybrids (including the four species above) withB. napus when pollination is carried out manually. At least 12 of these species were unable to form F₂ progeny, and eight were unable to produce progeny when the F₁ was backcrossed to one of the parental species. Many factors will influence the success of hybridization under field conditions, including: distance between the parents, synchrony of flowering, method of pollen spread, specific parental genotypes used, direction of the cross and the environmental conditions. Even where there is a possibility of hybridization betweenB. napus and a related species growing in the vicinity of a release, poor vigour and high sterility in the hybrids will generally mean that hybrids and their progeny will not survive in either an agricultural or natural habitat.     

Detection of gaps in sinusoids by frog auditory nerve fibers: importance in AM coding

Physiological studies were carried out in the frog (Rana pipiens pipiens) eighth nerve to determine: (i) whether the modulation rate or the silent gap was the salient feature that set the upper limit of time-locking to pulsed amplitude-modulated (PAM) stimuli, (ii) the gap detection capacity of individual eighth nerve fibers. Time-locked responses of 79 eighth nerve fibers to PAM stimuli (at the fiber's characteristic frequency) showed that the synchronization coefficient was a low-pass function of the modulation rate. In response to PAM stimuli having different pulse durations, a fiber gave rise to non-overlapping modulation transfer functions. The upper cut-off frequency of time locking was higher when tonepulses in PAM stimuli had shorter duration. The fact that the cut-off frequency was different for the different PAM series suggested that the AM rate was neither the sole, nor the main, determinant for the decay in time-locking at high AM rates. Gap detection capacity was determined for 69 eighth nerve fibers by assessing fiber's spiking activities to paired tone-pulses during an OFF-window and an ON-window. It was found that the minimum detectable gap of eighth nerve fibers ranged from 0.5 to 10 ms with an average of 1.23–2.16 ms depending on the duration of paired tone pulses. For each fiber, the minimum detectable gap was longer when the duration of tone pulses comprising the twin-pulse stimuli was more than four times longer. When the synchronization coefficient was plotted against the silent gap between tones pulses in the PAM stimuli, the gap response functions of a fiber as derived from multiple PAM series were equivalent to gap response functions deriving from twin-pulse series suggesting that it was the silent gap which primarily determined the upper limit of time-locking to PAM stimuli.Abbreviations MTF modulation transfer function - PAM pulse amplitude modulated - SAM sinusoidally amplitude modulated - SC synchronization coefficient - TW time window     

小麦体细胞胚发生的超微结构研究

对小麦（Ｔｒｉｔｉｃｕｍ ａｅｓｔｉｖｕｍ Ｌ．）幼胚培养中体细胞胚发生过程的超微结构变化进行了研究,结果如下：（１）原体细胞中大液泡消失,存在大量小液泡,细胞质的电子密度加强,核大,核仁明显,出现多核仁;（２）细胞器数量和种类,如质体、核糖体和线粒体增加;（３）细胞壁加厚,胞间连丝逐渐消失,细胞器数量丰富,胚性细胞中积累淀粉;（４）细胞壁加厚的胚性细胞中存在核仁液泡、自体吞噬泡和分泌泡;（５）多细胞原胚、球形胚和梨形胚被一层外壁包围,但胚体内细胞间广泛存在胞间连丝;（６）成熟胚生长点部位的细胞内质体中出现膜系结构,已向叶绿体转变,类囊体已形成