山东海岸木生海洋真菌的研究 Ⅲ

Five species of higher marine fungi were observed on the incubated drift and intertidal woods collected from the coasts of Yellow Sea and Bohai Sea. Among them, Halosphaeriopsis was a genus newly recorded for China. Taxonomy and morphology of these species were discussed in this paper. The specimens were deposited in Mycology Herbarium at Qingdao Agricultural University (MHQAU).     

Mapping gains and losses in woody vegetation across global tropical drylands

Woody vegetation in global tropical drylands is of significant importance for both the interannual variability of the carbon cycle and local livelihoods. Satellite observations over the past decades provide a unique way to assess the vegetation long‐term dynamics across biomes worldwide. Yet, the actual changes in the woody vegetation are always hidden by interannual fluctuations of the leaf density, because the most widely used remote sensing data are primarily related to the photosynthetically active vegetation components. Here, we quantify the temporal trends of the nonphotosynthetic woody components (i.e., stems and branches) in global tropical drylands during 2000–2012 using the vegetation optical depth (VOD), retrieved from passive microwave observations. This is achieved by a novel method focusing on the dry season period to minimize the influence of herbaceous vegetation and using MODerate resolution Imaging Spectroradiometer (MODIS) Normalized Difference Vegetation Index (NDVI) data to remove the interannual fluctuations of the woody leaf component. We revealed significant trends (P < 0.05) in the woody component (VOD_wood) in 35% of the areas characterized by a nonsignificant trend in the leaf component (VOD_leaf modeled from NDVI), indicating pronounced gradual growth/decline in woody vegetation not captured by traditional assessments. The method is validated using a unique record of ground measurements from the semiarid Sahel and shows a strong agreement between changes in VOD_wood and changes in ground observed woody cover (r² = 0.78). Reliability of the obtained woody component trends is also supported by a review of relevant literatures for eight hot spot regions of change. The proposed approach is expected to contribute to an improved assessment of, for example, changes in dryland carbon pools.     

Life Cycle Impacts and Benefits of Wood along the Value Chain: The Case of Switzerland

Sustainable use of wood may contribute to coping with energy and material resource challenges. The goal of this study is to increase knowledge of the environmental effects of wood use by analyzing the complete value chain of all wooden goods produced or consumed in Switzerland. We start from a material flow analysis of current wood use in Switzerland. Environmental impacts related to the material flows are evaluated using life cycle assessment–based environmental indicators. Regarding climate change, we find an overall average benefit of 0.5 tonnes carbon dioxide equivalent per cubic meter of wood used. High environmental benefits are often achieved when replacing conventional heat production and energy‐consuming materials in construction and furniture. The environmental performance of wood is, however, highly dependent on its use and environmental indicators. To exploit the mitigation potential of wood, we recommend to (1) apply its use where there are high substitution benefits like the replacement of fossil fuels for energy or energy‐intensive building materials, (2) take appropriate measures to minimize negative effects like particulate matter emissions, and (3) keep a systems perspective to weigh effects like substitution and cascading against each other in a comprehensive manner. The results can provide guidance for further in‐depth studies and prospective analyses of wood‐use scenarios.     

Global solid biomass trade for energy by 2020: an assessment of potential import streams and supply costs to North-West Europe under different sustainability constraints

The expected use of solid biomass for large-scale heat and power production across North–West Europe (NW EU) has led to discussions about its sustainability, especially due to the increasing import dependence of the sector. While individual Member States and companies have put forward sustainability criteria, it remains unclear how different requirements will influence the availability and cost of solid biomass and thus how specific regions will satisfy their demand in a competitive global market. We combined a geospatially explicit least-cost biomass supply model with a linear optimization solver to assess global solid biomass trade streams by 2020 with a particular focus on NW EU. We apply different demand and supply scenarios representing varying policy developments and sustainability requirements. We find that the projected EU solid biomass demand by 2020 can be met across all scenarios, almost exclusively via domestic biomass. The exploitation of domestic agricultural residue and energy crop potentials, however, will need to increase sharply. Given sustainability requirements for solid biomass as for liquid biofuels, extra-EU imports may reach 236 PJ by 2020, i.e., 400% of their 2010 levels. Intra-EU trade is expected to grow with stricter sustainability requirements up to 548 PJ, i.e., 280% of its 2010 levels by 2020. Increasing sustainability requirements can have different effects on trade portfolios across NW EU. Excluding pulpwood pellets may drive the supply costs of import dependent countries, foremost the Netherlands and the UK, whereas excluding additional forest biomass may entail higher costs for Germany and Denmark which rely on regional biomass. Excluding solid biomass fractions may create short-term price hikes. Our modeling results are strongly influenced by parameterization choices, foremost assumed EU biomass supply volumes and costs and assumed relations between criteria and supply. The model framework is suited for the inclusion of dynamic supply–demand interactions and other world regions.     

Woody Debris in the Mangrove Forests of South Florida1

Woody debris is abundant in hurricane‐impacted forests. With a major hurricane affecting South Florida mangroves approximately every 20 yr, carbon storage and nutrient retention may be influenced greatly by woody debris dynamics. In addition, woody debris can influence seedling regeneration in mangrove swamps by trapping propagules and enhancing seedling growth potential. Here, we report on line‐intercept woody debris surveys conducted in mangrove wetlands of South Florida 9–10 yr after the passage of Hurricane Andrew. The total volume of woody debris for all sites combined was estimated at 67 m³/ha and varied from 13 to 181 m³/ha depending upon differences in forest height, proximity to the storm, and maximum estimated wind velocities. Large volumes of woody debris were found in the eyewall region of the hurricane, with a volume of 132 m³/ha and a projected woody debris biomass of approximately 36 t/ha. Approximately half of the woody debris biomass averaged across all sites was associated as small twigs and branches (fine woody debris), since coarse woody debris >7.5 cm felled during Hurricane Andrew was fairly well decomposed. Much of the small debris is likely to be associated with post‐hurricane forest dynamics. Hurricanes are responsible for large amounts of damage to mangrove ecosystems, and components of associated downed wood may provide a relative index of disturbance for mangrove forests. Here, we suggest that a fine:coarse woody debris ratio ≤0.5 is suggestive of a recent disturbance in mangrove wetlands, although additional research is needed to corroborate such findings.     

Do coral-reef fish faunas have a distinctive taxonomic structure?

Do the highly diverse fish faunas that associate with coral reefs have distinguishing taxonomic and ecological characteristics, as proposed by Choat and Bellwood (1991) and Bellwood (1996)? Does a 50?my old (Eocene) fossil fish fauna from Italy represent a coral-reef fish assemblage that provides unique information about the evolution of such assemblages, as claimed by Bellwood (1996)? I compared the structure of the reef fish faunas of adjacent tropical regions rich and poor in coral reefs, in both America and Polynesia, and found that they exhibit no substantive differences in relative species richness among families of typical “coral-reef” fishes. While coral-rich regions have larger reef fish faunas, a variety of factors probably contribute to such differences. Thus coral-reef fish faunas may lack a distinctive taxonomic structure. A similar comparative approach would be useful for assessing whether assemblages of fishes on coral reefs have distinctive ecological characteristics. Based on patterns of habitat use by modern tropical shorefishes, the Italian Eocene fauna includes few definite reef fishes, and may well consist primarily of non-reef fishes preserved in a non-reef habitat. Until we know more about the environment in which those fossils were preserved, that fauna can contribute little to understanding how coral reef fish assemblages have evolved.     

Resin duct size and density as ecophysiological traits in fire scars of Pseudotsuga menziesii and Larix occidentalis

Background and Aims

Resin ducts (RDs) are features present in most conifer species as defence structures against pests and pathogens; however, little is known about RD expression in trees following fire injury. This study investigates changes in RD size and density in fire scars of Douglas fir (Pseudotsuga menziesii) and western larch (Larix occidentalis) as a means to evaluate the ecophysiological significance of traumatic resinosis for tree defence and survival.

Methods

Transverse and tangential microsections were prepared for light microscopy and image analysis in order to analyse axial and radial RDs, respectively. Epithelial cells of RDs and fusiform rays associated with radial RDs were also examined. RDs were compared between normal xylem and wound xylem at four different section heights along the fire-injured stem.

Key Results

Following fire injury, P. menziesii axial RDs narrowed by 38–43 % in the first year after injury, and the magnitude of this change increased with stem height. Larix occidentalis axial RDs widened by 46–50 % in the second year after injury. Radial RDs were of equivalent size in P. menziesii, but widened by 162–214 % in L. occidentalis. Fusiform rays were larger following fire injury, by 4–14 % in P. menziesii and by 23–38 % in L. occidentalis. Furthermore, axial RD density increased in both species due to the formation of tangential rows of traumatic RDs, especially in the first and second years after injury. However, radial RD density did not change significantly.

Conclusions

These results highlight traumatic resinosis as a species-specific response. Pseudotsuga menziesii produce RDs of equivalent or reduced size, whereas L. occidentalis produce wider RDs in both the axial and radial duct system, thereby increasing resin biosynthesis and accumulation within the whole tree. Larix occidentalis thus appears to allocate more energy to defence than P. menziesii.     

G‐fibres in storage roots of Trifolium pratense (Fabaceae): tensile stress generators for contraction

Root contraction has been described for many species within the plant kingdom for over a century, and many suggestions have been made for mechanisms behind these contractions. To move the foliage buds deeper into the soil, the proximal part of the storage root of Trifolium pratense contracts by up to 30%. Anatomical studies have shown undeformed fibres next to strongly deformed tissues. Raman imaging revealed that these fibres are chemically and structurally very similar to poplar (Populus) tension wood fibres, which are known to generate high tensile stresses and bend leaning stems or branches upright. Analogously, an almost pure cellulosic layer is laid down in the lumen of certain root fibres, on a thin lignified secondary cell wall layer. To reveal its stress generation capacities, the thick cellulosic layer, reminiscent of a gelatinous layer (G‐layer) in tension wood, was selectively removed by enzymatic treatment. A substantial change in the dimensions of the isolated wood fibre bundles was observed. This high stress relaxation indicates the presence of high tensile stress for root contraction. These findings indicate a mechanism of root contraction in T. pratense (red clover) actuated via tension wood fibres, which follows the same principle known for poplar tension wood.     

Wood formation in Angiosperms

Wood formation is a complex biological process, involving five major developmental steps, including (1) cell division from a secondary meristem called the vascular cambium, (2) cell expansion (cell elongation and radial enlargement), (3) secondary cell wall deposition, (4) programmed cell death, and (5) heartwood formation. Thanks to the development of genomic studies in woody species, as well as genetic engineering, recent progress has been made in the understanding of the molecular mechanisms underlying wood formation. In this review, we will focus on two different aspects, the lignification process and the control of microfibril angle in the cell wall of wood fibres, as they are both key features of wood material properties.