Actin binding proteins that change extent and rate of actin monomer-polymer distribution by different mechanisms

Actin binding proteins control actin assembly and disassembly by altering the critical concentration and by changing the kinetics of polymerization. All of these control mechanisms in some way or the other make use of the energy of hydrolysis of actin-bound ATP. Capping of barbed filament ends increases the critical concentration as long as ATP hydrolysis maintains a difference in the actin monomer binding constants of the two ends. A further increase in the critical concentration on adding a second cap, tropomodulin, to the other, pointed filament end also requires ATP hydrolysis as described by the model presented here. Changes in the critical concentration are amplified into much larger changes of the monomer pool by actin sequestering proteins, provided their actin binding equilibrium constants fall within a relatively narrow range around the values for the two critical concentrations of actin. Cofilin greatly speeds up treadmilling, which requires ATP hydroysis, by increasing the rate constant of depolymerization. Profilin increases the rate of elongation at the barbed filament end, coupled to a lowering of the critical concentration, only if ATP hydrolysis makes profilin binding to the barbed end independent of its binding constant for actin monomers.     

Analysis of human chorionic gonadotropin-monoclonal antibody interaction in BIAcore

Kinetic studies of macromolecular ligand-ligate interaction have generated ample interest since the advent of plasmon resonance based instruments like BIAcore. Most of the studies reported in literature assume a simple 1 : 1 Langmuir binding and complete reversibility of the system. However we observed that in a high affinity antigen-antibody system [human chorionic gonadotropin-monoclonal antibody (hCG-mAb)] dissociation is insignificant and the sensogram data cannot be used to measure the equilibrium and kinetic parameters. At low concentrations of mAb the complete sensogram could be fitted to a single exponential. Interestingly we found that at higher mAb concentrations, the binding data did not conform to a simple bimolecular model. Instead, the data fitted a two-step model, which may be because of surface heterogeneity of affinity sites. In this paper, we report on the global fit of the sensograms. We have developed a method by which a single two-minute sensogram can be used in high affinity systems to measure the association rate constant of the reaction and the functional capacity of the ligand (hCG) immobilized on the chip. We provide a rational explanation for the discrepancies generally observed in most of the BIAcore sensograms     

Immigration and emigration of Burkholderia cepacia and Pseudomonas aeruginosa between and within mixed biofilm communities

AIMS: To investigate the dynamics of binary culture biofilm formation through use of both the Sorbarod model of biofilm growth and the constant depth film fermenter (CDFF). METHODS AND RESULTS: Pseudo steady-state biofilm cultures of laboratory and clinical strains of Pseudomonas aeruginosa, selected on the basis of their ability to produce a Burkholderia cepacia growth-inhibitory substance, were established on Sorbarod filters and challenged with corresponding planktonic grown cultures of B. cepacia. Reverse challenges were also conducted. Both B. cepacia and P. aeruginosa were able to form steady-state monoculture biofilms after 48 h growth. When steady-state biofilms of B. cepacia NTCT 10661 were challenged with planktonically grown P. aeruginosa PAO1 known to produce a B. cepacia growth-inhibitory substance, the immigrant population was rapidly and almost completely bound to the biofilm, displacing B. cepacia. By contrast, established biofilms of P. aeruginosa PAO1 resisted immigration of B. cepacia 10661. Similar experiments conducted with a nongrowth inhibitory substance producing clinical pairing of P. aeruginosa 313113 and B. cepacia 313113 led to the formation of stable, mixed biofilm populations in both instances. Moreover, co-inoculation with these clinical isolates resulted in a stable, mixed steady-state biofilm. Similar observations were made for biofilms generated in CDFFs. In such instances following pan-swapping between two monoculture CDFFs, B. cepacia 313113 was able to integrate into an established P. aeruginosa 313113 biofilm to form a stable binary biofilm. CONCLUSIONS: Establishment of a mixed species community follows a specific sequence of inoculation that may either be due to some degree of match between co-colonizers or that P. aeruginosa predisposes uncolonized sections of the surface to permit B. cepacia colonization. SIGNIFICANCE AND IMPACT OF THE STUDY: Colonization of a surface with one bacterial species confers colonization resistance towards other species. Disinfection of a surface might well increase the probability of pathogen harbourage.     

Dynamic force microscopy for imaging of viruses under physiological conditions

Dynamic force microscopy (DFM) allows imaging of the structure and the assessment of the function of biological specimens in their physiological environment. In DFM, the cantilever is oscillated at a given frequency and touches the sample only at the end of its downward movement. Accordingly, the problem of lateral forces displacing or even destroying bio-molecules is virtually inexistent as the contact time and friction forces are reduced. Here, we describe the use of DFM in studies of human rhinovirus serotype 2 (HRV2) weakly adhering to mica surfaces. The capsid of HRV2 was reproducibly imaged without any displacement of the virus. Release of the genomic RNA from the virions was initiated by exposure to low pH buffer and snapshots of the extrusion process were obtained. In the following, the technical details of previous DFM investigations of HRV2 are summarized. Published: June 29, 2004.     

Ligand screening by exoproteolysis and mass spectrometry in combination with computer modelling

Here, we present a new approach for protein ligand screening based on the use of limited exoproteolysis coupled to MALDI-TOF mass spectrometry, combined with computational modelling and prediction of binding energies. As a test for this combined approach, we have screened a combinatorial library containing 8000 peptides (organized in 60 peptide samples) based on positional scanning format. This library is attached to a poly-Pro framework, and screened against the Abl-SH3 domain. The results obtained demonstrated the validity of the experimental and theoretical approaches in identifying better ligands and in rationalizing the changes in affinity. Exoproteolysis coupled to MALDI-TOF mass spectrometry could be used to screen complex libraries in a fast and efficient way.     

Interaction between calcium-free calmodulin and IQ motif of neurogranin studied by nuclear magnetic resonance spectroscopy

The interaction of Ca(2+)-free calmodulin (apoCaM) with the IQ motif corresponding to the calmodulin-binding domain of neurogranin has been studied by nuclear magnetic resonance (NMR) methods. The NMR spectra of uncomplexed apoCaM and apoCaM in complex with the IQ motif recorded at 750 MHz were studied and the backbone assignments of the protein in both forms were obtained by triple-resonance multidimensional NMR experiments. Chemical shift perturbations were used to map the binding surfaces. Only a single set of resonances was observed throughout the titration, indicating that the binding interaction is under fast exchange. Analysis of chemical shift changes indicates that (a) the main interaction and conformational changes occur in the C-terminal domain of calmodulin and (b) linker-1 (residues 40-44) between EF-1 and EF-2, linker-3 (residues 112-117) between EF-3 and EF-4, and the end of the alpha-helix H (residues 145-148) may be involved in the binding process. The dissociation constant (K(d)), estimated by fitting the chemical shift changes against the IQ peptide concentration, ranged from about 1.2 x 10(-5) to 8.8 x 10(-5) M. This result demonstrates that the interaction falls into the weak binding regime.     

Charge displacements during ATP-hydrolysis and synthesis of the Na+-transporting FoF1-ATPase of Ilyobacter tartaricus

Transient electrical currents generated by the Na(+)-transporting F(o)F(1)-ATPase of Ilyobacter tartaricus were observed in the hydrolytic and synthetic mode of the enzyme. Two techniques were applied: a photochemical ATP concentration jump on a planar lipid membrane and a rapid solution exchange on a solid supported membrane. We have identified an electrogenic reaction in the reaction cycle of the F(o)F(1)-ATPase that is related to the translocation of the cation through the membrane bound F(o) subcomplex of the ATPase. In addition, we have determined rate constants for the process: For ATP hydrolysis this reaction has a rate constant of 15-30 s(-1) if H(+) is transported and 30-60 s(-1) if Na(+) is transported. For ATP synthesis the rate constant is 50-70 s(-1).     

Inclusion complexation behavior of dyestuff guest molecules by a bridged bis(cyclomaltoheptaose)[bis(beta-cyclodextrin)] with a pyromellitic acid diamide tether

A novel bridged bis(beta-cyclodextrin) with a pyromellitic acid 2,5-diamide tether (2) has been synthesized by reaction of 6(I)-(2-aminoethyleneamino)-6-deoxycyclomaltoheptaose [mono 6-(2-aminoethyleneamino)-6-deoxy-beta-cyclodextrin] with 1,2,4,5-benzenetetracarboxylic dianhydride. Its inclusion complexation behavior with some representative dyestuffs, i.e., Acridine Red (AR), Rhodamine B (RhB), Neutral Red (NR), Brilliant Green (BG), was studied by using UV-absorption, fluorescence, and 2D NMR spectroscopy. Fluorescence titrations have been performed at 25 degrees C in pH 7.2 buffer solution to calculate the binding constants of resulting complexes. These results obtained indicated that bis(beta-cyclodextrin) 2 exhibits the strongly enhanced binding ability with all dye molecules examined compared with natural cyclodextrins. The binding modes of 2 with dye molecules have been deduced by 2D NMR experiments to establish the correlations between molecular conformations and binding constants of inclusion complexation. It is found that the improved binding ability and molecular selectivity of 2 could be attributed to double-cavity cooperative inclusion interaction and the size/shape matching between the host and guest.     

NMR diffusion as a novel tool for measuring the association constant between cyclodextrin and guest molecules

In this paper we introduce the use of diffusion measurements by nuclear magnetic resonance (NMR) spectroscopy for determining association constants of weak and very weak interactions between cyclodextrin and guest molecules, as long as both the free and complexed guest molecules are soluble to an extent that allows good sensitivity in the NMR experiment. The experimental setup and data analysis is discussed for three different guest molecules: L-phenylalanine, L-leucine and L-valine, representing different strengths of interaction. The underlying assumptions are discussed and the scope of the method (range of K(a) values, requirements to the guest molecule) are discussed. The method's main advantage is its general applicability independent of chromogenic or electrochemical properties of the guest molecule. Whereas calorimetric methods that exhibit a similar generality, are applicable mainly to strong interactions, NMR diffusion measurements are applicable to weaker interactions down to the theoretical limit of 1 M(-1), the upper limit for K(a) values to be determined by it is approximately 200. A further advantage of the method is the low amount of sample needed. The method is in principle applicable to any case of molecular recognition between a host and guest molecule leading to weak interactions.     

Program MULDER -- a tool for extracting torsion angles from NMR data

MULDER (Mostly UniversaL Dihedral angle ExtractoR) is a program for extraction of torsion angle information from NMR data. Currently, it can analyze two types of input data: The torsion angle data, where several ³J-coupling constants and/or interatomic distances are combined in order to reduce the torsion angle ambiguity arising from solving the isolated Karplus (or distance) equation, and the sugar pucker data, where the dynamics of five-membered sugar rings is evaluated by postprocessing the results calculated from ³J_(HH) coupling constants by program PSEUROT. Program MULDER can be used either as an alternative to r-MD programs in situations where only specific structural features are studied, or as a preparatory tool in connection with full r-MD structure calculation for extraction of unambiguous torsion angle restraints.