Simultaneous determination of oxidative hair dye p-phenylenediamine and its metabolites in human and rabbit biological fluids

A liquid chromatography with an electrochemical detector method has been developed for the quantitative measurement for three diamine derivatives (p-phenylenediamine, N,N(')-p-phenylenebisacetamide, and 4-aminoacetanilide) in human urine and rabbit blood, urine, and feces. The detection cell consisted of a glassy carbon electrochemical signal obtained with a supporting electrolyte containing 20% methanol-5mM octylammonium orthophosphate (pH 6.30) as the mobile phase. A comparison of the results obtained from HPLC-UV shows agreement.     

Development of intramolecularly quenched fluorescent peptides as substrates of angiotensin-converting enzyme 2

Angiotensin-converting enzyme 2 (ACE2 or ACEH) is a novel angiotensin-converting enzyme-related carboxypeptidase that cleaves a single amino acid from angiotensin I, des-Arg bradykinin, and many other bioactive peptides. Using des-Arg bradykinin as a template, we designed a series of intramolecularly quenched fluorogenic peptide substrates for ACE2. The general structure of the substrates was F-X-Q, in which F was the fluorescent group, Abz, Q was the quenching group (either Phe(NO(2)) or Tyr(NO(2))), and X was the intervening peptide. These substrates were selectively cleaved by recombinant human ACE2, as shown by MS and HPLC. Quenching efficiency increased as the peptide sequence was shortened from 8 to 3 aa, and also when Tyr(NO(2)) was used as a quenching group instead of Phe(NO(2)). Two of the optimized substrates, TBC5180 and TBC5182, produced a signal:noise ratio of better than 20 when hydrolyzed by ACE2. Kinetic measurements with ACE2 were as follows: TBC5180, K(m)=58 microM and k(cat)/K(m)=1.3x10(5)M(-1)s(-1); TBC5182, K(m)=23 microM and k(cat)/K(m)=3.5 x 10(4)M(-1)s(-1). Thus, based on hydrolysis rate, TBC5180 was a better substrate than TBC5182. However, TBC5180 was also hydrolyzed by ACE, whereas TBC5182 was not cleaved, suggesting that TBC5182 was a selective for ACE2. We conclude that these two peptides can be used as fluorescent substrates for high-throughput screening for selective inhibitors of ACE2 enzyme.     

Development of a fluorescent probe for the study of nucleosome assembly and dynamics

To develop a probe for use in real-time dynamic studies of nucleosomes, core histones (from Drosophila) were conjugated to a DNA-intercalating dye, thiazole orange, by a reaction targeting Cys 110 of histone H3. In the absence of DNA, the conjugated histones are only very weakly fluorescent. However, upon reconstitution into nucleosomes by standard salt dialysis procedures, the probe fluoresces strongly, reflecting its ability to intercalate into the nucleosomal DNA. The probe is also sensitive to the nature of the DNA-histone interaction. Nucleosomes reconstituted by stepwise salt dialysis give a fluorescence signal quite different from that of the species formed when DNA and histones are simply mixed in low salt. In addition, changing either the DNA length or the type of sequence (nucleosome positioning sequences versus random DNA of the same size) used in the reconstitution alters the resulting fluorescence yield. The results are all consistent with the conclusion that a more rigid, less flexible nucleosome structure results in less fluorescence than a looser structure, presumably due to structural constraints on dye intercalation. This probe should be well suited to analyzing nucleosome dynamics and to following factor-mediated assembly and remodeling of nucleosomes in real time, particularly at the single-molecule level.     

Purification and partial characterization of azoreductase from Enterobacter agglomerans

Azoreductase, an enzyme catalyzing the reductive cleavage of the azo bond of methyl red (MR) and related dyes, was purified to electrophoretic homogeneity from Enterobacter agglomerans. This bacterial strain, isolated from dye-contaminated sludge, has a higher ability to grow, under aerobic conditions, on culture medium containing 100mg/L of MR. The enzyme was purified approximately 90-fold with 20% yield by ammonium sulfate precipitation, followed by three steps of column chromatography (gel-filtration, anion-exchange, and dye-affinity). The purified enzyme is a monomer with a molecular weight of 28,000 Da. The maximal azoreductase activity was observed at pH 7.0 and at 35 degrees C. This activity was NADH dependent. The K(m) values for both NADH and MR were 58.9 and 29.4 microM, respectively. The maximal velocity (V(max)) was 9.2 micromol of NADH min(-1)mg(-1). The purified enzyme is inhibited by several metal ions including Fe(2+) and Cd(2+).     

Stage-specific profiling of Plasmodium falciparum proteases using an internally quenched multispecificity protease substrate

Novel internally quenched fluorescence peptide substrates containing sequence specific sites for cleavage by multiple proteases were designed and synthesized. The 28 and 29 residue peptides contain an N-terminal fluorescence acceptor group, 4-(4-dimethylaminophenylazo)benzoic acid (DABCYL), and a C-terminal fluorescence donor group, 5-(2-aminoethylamino)naphthalene-1-sulfonic acid (EDANS). Efficient energy transfer between the donor and acceptor groups flanking the peptide sequence was achieved by incorporation of a central DPro-Gly segment, which serves as a conformation nucleating site, inducing hairpin formation. This multispecificity protease substrate was used to profile the proteolytic activities in the malarial parasite Plasmodium falciparum in a stage dependent manner using a combination of fluorescence and MALDI mass spectrometry. Cysteine protease activity was shown to be dominating at neutral pH, whereas aspartic protease activity contributed predominantly to the proteolytic repertoire at acidic pH. Maximum proteolysis was observed at the trophozoite stage followed by the schizonts and the rings.     

Structural requirements of the fructan-lipid interaction

Fructans are a group of fructose-based oligo- and polysaccharides. They are proposed to be involved in membrane protection of plants during dehydration. In accordance with this hypothesis, they show an interaction with hydrated lipid model systems. However, the structural requirements for this interaction are not known both with respect to the fructans as to the lipids. To get insight into this matter, the interaction of several inulins and levan with lipids was investigated using a monomolecular lipid system or the MC 540 probe in a bilayer system. MD was used to get conformational information concerning the polysaccharides. It was found that levan-type fructan interacted comparably with model membranes composed of glyco- or phospholipids but showed a preference for lipids with a small headgroup. Furthermore, it was found that there was an inulin chain-length-dependent interaction with lipids. The results also suggested that inulin-type fructan had a more profound interaction with the membrane than levan-type fructan. MD simulations indicated that the favorable conformation for levan is a helix, whereas inulin tends to form random coil structures. This suggests that flexibility is an important determinant for the fructan-lipid interaction.     

Evaluation of effective diffusion coefficient and intrinsic kinetic parameters on azo dye biodegradation using PVA-immobilized cell beads

An immobilized mixed culture (Aeromonas hydrophila, Comamonas testosteroni, and Acinetobacter baumannii) was prepared by entrapment into phosphorylated polyvinyl alcohol (PVA) gel beads. The unsteady-state diffusion mechanism in a gel bead was applied to estimate the effective diffusion coefficients (D(e)) and the partition coefficients (K(p)) of azo dye. In addition, a simple method was developed to determine the intrinsic kinetic parameters of immobilized cells from observed reaction rates and the intrinsic kinetic parameters were then verified by fitting the experimental data into the reaction-diffusion model in a batch reactor running at a well-stirred state. The calculated effectiveness factor (eta(cal)) approached unity at Thiele modulus (Phi) < 0.3 (i.e., d(p) < 0.475 mm). The experimental effectiveness factor (eta(exp)) was in the range of 0.71-0.45 for a corresponding sphere diameter (d(p)) of 1.91 +/- 0.16 to 4.43 +/- 0.07 mm at an initial dye concentration of 200 mg/L. The results show that intraparticle diffusion resistance has a significant effect on the azo dye biodegradation rate.     

Fluorescent organophosphonates as inhibitors of microbial lipases

Short- and long-chain 1-O-alkyl-2-acylaminodeoxyglycero- and alkoxy-alkylphosphonic acid p-nitrophenyl esters were synthesized as inhibitors for analytical and mechanistic studies on lipolytic enzymes. The respective compounds contain perylene or nitrobenzoxadiazole as reporter fluorophores covalently bound to the omega-ends of the respective 2-acylamino- and alkoxy- residues. Their inhibitory effects on the activities of three selected lipases showing different substrate preferences were determined, including the lipases from Rhizopus oryzae, Pseudomonas species, and Pseudomonas cepacia. R. oryzae lipase reacted much better with the single-chain inhibitors than the two-chain deoxyglycerolipids. In contrast, P. cepacia lipase was inactivated by perylene-containing two-chain phosphonate (XXII) to a larger extent as compared to the other inhibitors whereas Pseudomonas species lipase interacted efficiently and without any preferences with all inhibitors used in this study. In summary, the different lipases show a very characteristic reactivity pattern not only with respect to triacylglycerol substrates but also to their structurally related inhibitors. Thus, the novel phosphonates might be useful tools not only for analysis and discrimination of known lipolytic enzymes but also for discovery of yet unknown lipases/esterases in biological samples.     

Fluorescence correlation spectroscopy and its potential for intracellular applications

Fluorescence correlation spectroscopy (FCS) is a time-averaging fluctuation analysis of small molecular ensembles, combining maximum sensitivity with high statistical confidence. Among a multitude of physical parameters that are, in principle, accessible by FCS, it most conveniently allows to determine local concentrations, mobility coefficients, and characteristic rate constants of fast-reversible and slow-irreversible reactions of fluorescently labeled biomolecules at very low (nanomolar) concentrations, under equilibrium conditions and without physical separation. Its presently most popular instrumentation by confocal-microscope setups allows for a spatial resolution of fractions of femtoliters for the measurement volumes, containing sparse or even single molecules at any time, and encourages the adaptation of the solution-based technique for cellular applications. The scope of this review is thus, to introduce the FCS technique in particular to the reader with biological background, searching for new methods for a precise quantification of physical parameters governing cellular mechanisms and dynamics, especially if high sensitivity and fast dynamic resolution are required. After a short theoretical introduction, examples are given for the so far most important experimental applications, with respect to their implementation in cellular systems. As an interesting alternative to the confocal instrumentation, two-photon excitation will be introduced, offering a number of important advantages especially in cellular systems with high-noise and low-signal levels.