Isolation of Clostridium propionicum strain 19acry3 and further characteristics of the species

Two mixed cultures able to ferment acrylate to equimolar acetate and propionate were enriched from anaerobic sediments. From one of these mixed cultures a pure culture of a Gram-positive, obligately anaerobic bacterium was isolated. This strain, designated 19acry3 (= DSM 6251) was identified as belonging to the species Clostridium propionicum. Only a narrow range of organic compounds supported growth, including acrylate and lactate. Acrylate and lactate were fermented to acetate and propionate in a 1:2 molar ratio. When co-cultured with the non-acrylate-fermenting Campylobacter sp. strain 19gly1 (DSM 6222), the fermentation balance shifted to almost equimolar acetate and propionate. Strain 19acry3 was compared with Clostridium propionicum type strain X2 (DSM 1682). The two strains displayed similar phenotypic properties. The mol% G+C of DNA isolated from both strains was 36–37 (by thermal denaturation). Both strains displayed a characteristic fluorescence when observed by fluorescence microscopy. Cell-free extracts of both strains were examined by spectrophotofluorimetry. In both strains, two excitation peaks were observed at 378 and 470 nm. Excitation at either of these wavelengths resulted in an emission maximum at 511 nm.     

Mechanism of interaction of the cyanine dye DiS−C3-(5) with renal brush-border vesicles

Summary The equilibrium binding mechanism and kinetics of binding of diS–C₃-(5) (3,3-dipropylthiodicarbocyanine iodide) to rabbit renal brush-border membrane vesicles (BBMV) were examined using steady-state and time-resolved fluorescence, and fluorescence stopped-flow methods. In aqueous solution, diS–C₃-(5) exists as a monomer at concentrations <5 m with fluorescence emission peak at 670 nm (excitation 622 nm), anisotropyr=0.102, and lifetime =1.2 nsec (23°C). Upon addition of increasing BBMV (voltage clamped to 0 mV using K⁺/valinomycin), the 670 nm emission peak decreases, corresponding to formation of a nonfluorescent membrane dimer, and subsequently a new emission peak at 695 nm increases, corresponding to membrane monomer. Dynamic depolarization studies show that aqueous diS–C₃-(5) rotation is unhindered with a rotational rateR=0.57 nsec^–1 while membrane monomer is hindered with steady-state anisotropyr=0.190, lifetime =2.1 nsec,R=0.58 nsec^–1 and limiting anisotropyr =0.11. Based on equilibrium fluorescence titrations, the membrane monomer-dimer (M-D) dissociation constant,K _d=[M]²/[D][BBMV], is 0.0013, where BBMV is expressed as membrane phospholipid concentration. Three distinct kinetic processes are identified by stopped-flow experiments in which BBMV are mixed with diS–C₃-(5). There is rapid binding of diS–C₃-(5) to the membrane to form bound monomer with a 6-msec exponential time constant. The membrane monomer at the membrane outer surface then aggregates to form bound dimer at the outer surface with a concentration independent time constant of 30 msec. The overall dimerization reaction probably consists of a rate-limiting reorientation process (30 msec) followed by a rapid dimerization which occurs on a nanosecond time scale. Finally, there is a 0.8 to 1 sec translocation of membrane dimer between symmetric sites at the inner and outer membrane surfaces. The translocation reaction is the step which is probably sensitive to changes in transmembrane electrical potential.     

Acetic acid esters and permeable weak acids induce active proton extrusion and extension growth of coleoptile segments by lowering the cytoplasmic pH

In Avena coleoptile segments a decrease of cytoplasmic pH activates energy-dependent H⁺ extrusion into the apoplast, thereby triggering extension growth. This sequence of events cannot be inhibited by cycloheximide and is induced by the following conditions and compounds. (i) A short anaerobic treatment of coleoptile segments results in the formation of lactic acid and an intracellular decrease of pH. For a period of 20 min after transfer to normal air, the growth rate is up to six times higher than the rate before anaerobiosis. (ii) Similarly, incubation of segments with CN^– (0.1 mM) in the presence of oxygen causes and accumulation of lactic acid and a fall in cell-sap pH. After removing CN^– a growth burst occurs. (iii) Higher concentrations of permeable acids (10 mM in buffer pH 5.8) induce extension growth. This growth is O₂-dependent and therefore differs from the acid growth, which can be triggered under anaerobic conditions by acid buffers of pH5 via the direct increase of cell-wall plasticity. (iv) A short application of CO₂-saturated buffer (pH 5.8) causes CO₂-induced elongation growth; after a 3-min pulse the growth rate is enhanced for about 15 min. (v) Lipophilic esters of acetic acid or propionic acid, such as naphthylacetate, naphthylpropionate, phenylacetate, benzylacetate induce elongation growth. These compounds, when taken up into the cell, are hydrolized by esterases; the acids released lower the cytoplasmic pH (shown by the pH indicator, fluorescein). The highest esterase activity was found in a microsomal membrane fraction of coleoptiles. While the carboxyester-induced extension growth is completely inhibited under anoxia, the initial acidification of the bathing solution can still be observed. This decrease in external pH is obviously the result of ester hydrolysis, caused by damaged cells, and is not the result of pH changes within the cell-wall compartment. It is suggested that a fast uptake of carboxyesters and the shift in equilibrium caused by their internal hydrolysis leads to a continuous formation of acids which lowers the cytoplasmic pH and activates the ATP-dependent H⁺ extrusion. In most experiments fusicoccin (a diacetic acid ester) acts similarly to naphthylacetate and the other carboxyesters, although quantitative differences exist. Therefore, it is possible that fusicoccin is effective partly on the basis of its ester characteristic. The effects observed are discussed with regard to the very narrow pH optimum of plasma-membrane H⁺-ATPases exhibiting their highest levels of activity at pH 6.5 (Hager and Biber 1984, Z. Naturforsch. C 39, 927–937).Abbreviations CHM cycloheximide - DMO dimethadione (5.5-dimethyl-2,4-oxazolidinedione) - FC fusicoccin - IAA indole-3-acetic acid - Mes 2-(N-morpholino)ethanesulfonic acid - NA (or )-naphthylacetate (acetic acid-1(or-2-)naphthylester) - NAA (or )-naphthaleneacetic acid - PA phenylacetate (acetic acid phenylester)     

A rapid cell membrane permeability test using flourescent dyes and flow cytometry

A reliable and rapid test to detect cytotoxic chemicals which affect cell membranes is described. Fluorescein diacetate freely penetrates intact cells where it is hydrolyzed to its fluorochrome, fluorescein, which is retained in the cell due to its polarity. On the other hand, ethidium bromide is known to be excluded from the intact cell, staining only nucleic acids of membrane-damaged cells. The combination of both fluorochromes results in counter-staining: intact cells fluoresce green (cytoplasm) and membrane-damaged cells fluoresce red (nucleus and RNA). Rat thymocytes freshly isolated without enzyme treatment were incubated simultaneously with test substance and dye solution fluorescein diacetate and ethidium bromide. A two-parameter analysis was performed on a flow cytometer with an on-line computer. Concentration-dependent effects of various detergents and solvents were quantified by measuring the amount of dye retention, i.e., the decrease or increase in fluorescein—fluorescence (peak shift), and the decrease in dye exclusion (increase in ethidium bromide-staining) relative to the untreated control. The assay can be used for rapid monitoring of chemical insults to cell membranes which precede the decrease of the viability measured by pure dye exclusion techniques.Abbreviations DMA dimethyl sulfate - DMSO dimethyl sulfoxide - EB ethidium bromide - F fluorescein - FDA fluorescein diacetate - FS₂₅ concentration of test substance resulting in a F-peak left-shift of 25% from control - PBS phosphate buffered saline - SCT forward light scatter - SDS sodium dodecyl sulfate     

Photochemical changes of fluorescent probes in membranes and their effect on the observed fluorescence anisotropy values

The fluorescence intensity of diphenylhexatriene (DPH) and of trimethylammonium-diphenylhexatriene (TMA-DPH) is measured when these probes are embedded in vesicles of dipalmitoyl- and dioleoylphosphatidylcholine (DPPC and DOPC), in mixtures of these vesicles as well as in vesicles of the mixed phospholipids, in trout intestinal brush border membranes and in mitoplasts of rat liver cells. The intensity in DOPC vesicles is found to be significantly higher than in DPPC vesicles. When these systems are irradiated with strong ultraviolet light radiation, a decrease in the fluorescence intensity is observed; this effect is much stronger in DOPC than in DPPC vesicles. The fluorescence anisotropy values in the mixture of vesicles as well as in the membranes show an initial increase with irradiation which is followed by a significant decrease. A transfer of DPH molecules between DPPC and DOPC vesicles is observed. For TMA-DPH this transfer takes place only from DPPC to DOPC vesicles, but not vice-versa. These results are related to intensity and anisotropy measurements of these probes in cell cultures.     

Artificial Feeding Systems for Plant-Parasitic Nematodes

Feeding of an "obligate" plant-parasitic nematode (nonfungal feeder), Pratylenchus scribneri, in the absence of plant tissue was demonstrated in an artificial system consisting of liquid media and indicator dyes including amaranth and various nontoxic food colors. Among the compounds tested, sucrose, dextrose, Gamborg''s B5 medium, and DL-methionine stimulated a small percentage of feeding (12-36%). A high percentage of feeding (90-100%) occurred in a filtrate from excised corn roots cultured in Gamborg''s B5 medium. This feeding system has the potential to develop an artificial medium for plant-parasitic nematodes and to screen novel nematicides that are stomach poisons.     

Sites of Tubulin Polymerization in PC 12 Cells

The site at which tubulin enters into polymer in the neuritic process is a very important datum in terms of our understanding of the mechanism of transport of the microtubular cytoskeleton out the axon. If the form of tubulin being transported out the axon is the microtubule, then assembly of tubulin into microtubules should occur at or near the cell body; if, however, the form of tubulin transported is free tubulin dimer, then assembly can occur at any free microtubule end out the neurite. We have injected a fluorescent analog of tubulin into differentiated PC 12 cells and used differential extraction protocols to extract free dimer but not microtubules. We have imaged these cells before and after extraction by low-light-level video fluorescence microscopy and have used image analysis to examine the sites of tubulin incorporation into polymer or other unextracted components as a function of time. We find that tubulin in the distal reaches of the neurite is found initially as monomer and that its appearance in the unextracted component occurs later. This pattern of appearance of fluorescent tubulin initially in the soluble fraction and later in the unextractable component is qualitatively similar to that reported by other workers for biotinylated tubulin, but we see a larger gap between the rates of appearance in soluble fraction and in polymer. Quantitative analysis of fluorescence intensities in the two compartments with distance out the neurite reveals substantial variation between different neurites: In some neurites, the pattern of variation of unextracted/total tubulin suggests that tubulin enters into the unextracted component primarily near the cell body and that this unextracted component moves out the neurite with time, and in other neurites it suggest that monomer adds into microtubule ends staggered out the neurite. In no case do we see a pattern suggesting that distal addition predominates. These analyses of fluorescence intensities in extracted and unextracted neurites suggest that both transport of polymerized microtubules and monomer addition onto staggered microtubule ends occur in PC12 neurites and that in individual neurites one or the other of these two behaviors may predominate.     

Aluminium interactions with K+(86Rb+) and 45Ca2+ fluxes in three cultivars of sugar beet (Beta vulgaris)

Three cultivars of sugar beet (Beta vulgaris L.), which are sensitive to aluminium (Al) in the order Primahill > Monohill > Regina, were grown in water culture for 2 weeks. Nutrients were supplied at 15% increase of amounts daily, corresponding to the nutrient demand for maximal growth. The 2.4-dinitrophenol (DNP)-sensitive (metabolic) and DNP-insensitive (non-metabolic) uptake of aluminium, phosphate. ⁴⁵Ca²⁺ and K⁺(⁸⁶Rb⁺) in roots were measured as well as transport to shoots of intact plants. All 3 cultivars absorbed more aluminium if DNP was present during the aluminium treatment than in its absence. It is suggested that sugar beets are able to extrude aluminium activity or that they possess an active mechanism to keep Al outside the cell. The presence of Al in the medium during the 1-h experiment affected the metabolic and non-metabolic fluxes of ⁴⁵Ca²⁺ and K⁺(⁸⁶Rb⁺) in different ways. In the presence of DNP, the influx of both ⁴⁵Ca²⁺ and K⁺(⁸⁶Rb⁺) and the efflux of ⁴⁵Ca²⁺ were inhibited by Al in a competitive way. At inhibition of ⁴⁵Ca²⁺ influx, 2 Al ions are probably bound per Ca²⁺ uptake site in cv. Regina (Al-tolerant), but in cvs Primahill and Monohill only one Al ion is bound (more Al sensitive). Aluminium competitively inhibited the active efflux of ⁴⁵Ca²⁺ (absence of DNP) in almost the same way in the 3 cultivars. In contrast, aluminium stimulated the influx of K⁺(⁸⁶Rb⁺) in cvs Primahill, Monohill and Regina in the absence of DNP. Thus, the Al effects on active and passive K⁺(⁸⁶Rb⁺) influx are different. The total influx of K⁺(⁸⁶Rb⁺) increased in the presence of Al and might be connected to an active exclusion of Al. Regina is the least Al-sensitive cultivar, probably because Al interferes less with the Ca²⁺ fluxes and because this cultivar actively excludes phosphate in the presence of Al. Thus Al-phosphate precipitation within the plant could be avoided.     

Effect of the new fluorescent brightener Rylux BSU on morphology and biosynthesis of cell walls in Saccharomyces cerevisiae

Rylux BSU, a new fluorescent brightener from the family of 4,4-diaminostilbene-2,2disulfonic acid derivatives, inhibited growth and cytokinesis of the yeast Saccharomyces cerevisiae. In the presence of 0.1–1 mg/ml Rylux BSU the cells grew in clumps, had irregular shape and were larger than controls. They formed apparently normal primary septa but their secondary septa and lateral cell walls, especially those in older cells, were abnormally thick with large deposits of amorphous wall material in the periplasmic spaces all over the cell surface. Chitin content in the cell walls of cells grown in the presence of Rylux BSU was increased 2 to 5 times in comparison to that of the controls and glucan content was reduced by up to 30%. In the in vitro assays with particulate membrane fractions, Rylux BSU acted as a non-competitive inhibitor of -1,3-glucan synthase with inhibitory constant K _i=1.75 mg/ml whereas the chitin synthase was inhibited to a much lesser extent. From the difference of the effects of Rylux BSU on the synthesis of chitin in vivo and in vitro it is concluded that the brightener interacts with chitin synthase only indirectly, possibly by influencing the properties of integral plasma membrane.Abbreviations RBSU Rylux BSU, 1,4-benzenedisulfonic acid-2,2-[ethyleneidy]bis[(3-sulpho-4,1-phenylene)imino[6-bis(2-hydroxyethyl)amino]-1,3,5-triazine-4,2-diylamino]]bis-, hexasodium salt - FB fluorescent brightener     

The effect of ethanol on lateral and rotational mobility of plasma membrane vesicles isolated from cultured mar 18.5 hybridoma cells

Intramolecular excimer formation of 1,3-di(1-pyrenyl)propane (Py-3-Py) and fluorescence polarization of 1,6-diphenyl-1,3,5-hexatriene (DPH) were used to evaluate the effect of ethanol on the rate and range of the lateral mobility and the range of the rotational mobility of bulk bilayer structures of the plasma membrane vesicles (ATCC-PMV) isolated from cultured hybridoma cells (ATCC TIB 216). In a concentration-dependent manner, ethanol increased the excimer to monomer fluorescence intensity ratio (I/I) of Py-3-Py in the ATCC-PMV and decreased the anisotropy (r), limiting anisotropy (r) and order parameter (S) of DPH in the ATCC-PMV. This indicates that ethanol increased both the lateral and rotational mobility of the probes in the ATCC-PMV. Selective quenching of DPH by trinitrophenyl groups was utilized to examine the range of transbilayer asymmetric rotational diffusion of the ATCC-PMV. The anisotropy (r), limiting anisotropy (r ) and order parameter (S) of DPH in the inner monolayer were 0.024, 0.032, and 0.069, respectively, greater than calculated for the outer monolayer of the ATCC-PMV. Selective quenching of DPH by trinitrophenyl groups was also used to examine the transbilayer asymmetric effects of ethanol on the range of the rotational mobility of the ATCC-PMV. Ethanol had a greater increasing effect on the range of the rotational mobility of the outer monolayer as compared to the inner monolayer of the ATCC-PMV. It has been proven that ethanol exhibits a selective rather than nonselective fluidizing effect within the transbilayer domains of the ATCC-PMV.This paper was supported in part by a research grant from the Korea Science and Engineering Foundation (KOSEF 88-1013-01) and from the Korea Research Foundation (1991–1993).