Development of intramolecularly quenched fluorescent peptides as substrates of angiotensin-converting enzyme 2

Angiotensin-converting enzyme 2 (ACE2 or ACEH) is a novel angiotensin-converting enzyme-related carboxypeptidase that cleaves a single amino acid from angiotensin I, des-Arg bradykinin, and many other bioactive peptides. Using des-Arg bradykinin as a template, we designed a series of intramolecularly quenched fluorogenic peptide substrates for ACE2. The general structure of the substrates was F-X-Q, in which F was the fluorescent group, Abz, Q was the quenching group (either Phe(NO(2)) or Tyr(NO(2))), and X was the intervening peptide. These substrates were selectively cleaved by recombinant human ACE2, as shown by MS and HPLC. Quenching efficiency increased as the peptide sequence was shortened from 8 to 3 aa, and also when Tyr(NO(2)) was used as a quenching group instead of Phe(NO(2)). Two of the optimized substrates, TBC5180 and TBC5182, produced a signal:noise ratio of better than 20 when hydrolyzed by ACE2. Kinetic measurements with ACE2 were as follows: TBC5180, K(m)=58 microM and k(cat)/K(m)=1.3x10(5)M(-1)s(-1); TBC5182, K(m)=23 microM and k(cat)/K(m)=3.5 x 10(4)M(-1)s(-1). Thus, based on hydrolysis rate, TBC5180 was a better substrate than TBC5182. However, TBC5180 was also hydrolyzed by ACE, whereas TBC5182 was not cleaved, suggesting that TBC5182 was a selective for ACE2. We conclude that these two peptides can be used as fluorescent substrates for high-throughput screening for selective inhibitors of ACE2 enzyme.     

Stage-specific profiling of Plasmodium falciparum proteases using an internally quenched multispecificity protease substrate

Novel internally quenched fluorescence peptide substrates containing sequence specific sites for cleavage by multiple proteases were designed and synthesized. The 28 and 29 residue peptides contain an N-terminal fluorescence acceptor group, 4-(4-dimethylaminophenylazo)benzoic acid (DABCYL), and a C-terminal fluorescence donor group, 5-(2-aminoethylamino)naphthalene-1-sulfonic acid (EDANS). Efficient energy transfer between the donor and acceptor groups flanking the peptide sequence was achieved by incorporation of a central DPro-Gly segment, which serves as a conformation nucleating site, inducing hairpin formation. This multispecificity protease substrate was used to profile the proteolytic activities in the malarial parasite Plasmodium falciparum in a stage dependent manner using a combination of fluorescence and MALDI mass spectrometry. Cysteine protease activity was shown to be dominating at neutral pH, whereas aspartic protease activity contributed predominantly to the proteolytic repertoire at acidic pH. Maximum proteolysis was observed at the trophozoite stage followed by the schizonts and the rings.     

Fluorescent organophosphonates as inhibitors of microbial lipases

Short- and long-chain 1-O-alkyl-2-acylaminodeoxyglycero- and alkoxy-alkylphosphonic acid p-nitrophenyl esters were synthesized as inhibitors for analytical and mechanistic studies on lipolytic enzymes. The respective compounds contain perylene or nitrobenzoxadiazole as reporter fluorophores covalently bound to the omega-ends of the respective 2-acylamino- and alkoxy- residues. Their inhibitory effects on the activities of three selected lipases showing different substrate preferences were determined, including the lipases from Rhizopus oryzae, Pseudomonas species, and Pseudomonas cepacia. R. oryzae lipase reacted much better with the single-chain inhibitors than the two-chain deoxyglycerolipids. In contrast, P. cepacia lipase was inactivated by perylene-containing two-chain phosphonate (XXII) to a larger extent as compared to the other inhibitors whereas Pseudomonas species lipase interacted efficiently and without any preferences with all inhibitors used in this study. In summary, the different lipases show a very characteristic reactivity pattern not only with respect to triacylglycerol substrates but also to their structurally related inhibitors. Thus, the novel phosphonates might be useful tools not only for analysis and discrimination of known lipolytic enzymes but also for discovery of yet unknown lipases/esterases in biological samples.     

Fluorescence correlation spectroscopy and its potential for intracellular applications

Fluorescence correlation spectroscopy (FCS) is a time-averaging fluctuation analysis of small molecular ensembles, combining maximum sensitivity with high statistical confidence. Among a multitude of physical parameters that are, in principle, accessible by FCS, it most conveniently allows to determine local concentrations, mobility coefficients, and characteristic rate constants of fast-reversible and slow-irreversible reactions of fluorescently labeled biomolecules at very low (nanomolar) concentrations, under equilibrium conditions and without physical separation. Its presently most popular instrumentation by confocal-microscope setups allows for a spatial resolution of fractions of femtoliters for the measurement volumes, containing sparse or even single molecules at any time, and encourages the adaptation of the solution-based technique for cellular applications. The scope of this review is thus, to introduce the FCS technique in particular to the reader with biological background, searching for new methods for a precise quantification of physical parameters governing cellular mechanisms and dynamics, especially if high sensitivity and fast dynamic resolution are required. After a short theoretical introduction, examples are given for the so far most important experimental applications, with respect to their implementation in cellular systems. As an interesting alternative to the confocal instrumentation, two-photon excitation will be introduced, offering a number of important advantages especially in cellular systems with high-noise and low-signal levels.     

Examination of molar-based distribution of A,B and C chains of amylopectin by fluorescent labeling with 2-aminopyridine

A method for determination of a molar-based distribution of A, B and C chains of amylopectin was developed. Labeling with fluorescent 2-aminopyridine was proportional to the number-average degree of polymerization (dp(n)) of the chains in the range of 6-440. Number-average chain lengths (cl(n)) of amylopectins from six different plant sources (rice, maize, wheat, potato, sweet potato and yam) determined by the labeling method were in good agreement with values obtained by determination of non-reducing residues. The molar-based distributions were polymodal (A, B(1) and B(2)+B(3) fractions) and characteristic to botanical sources. Amylopectins from starches with A-crystalline type had higher amount of A+B(1) chains (90-93% by mole) than starches with B-type (68-87%). Molar ratios of (A+B(1))/(B(2)+B(3)) were 8.9-12.9 for the A-type starches and 2.1-6.5 for the B-type starches, suggesting that amylopectins of A-type starches had 1.5-2 times more branches per cluster than B-type. The distributions of C chains, except for amylomaize, showed a broad, asymmetrical profile from dp approximately 10 to approximately 130 with a peak at dp approximately 40 and were very similar among botanical sources, suggesting that the biosynthetic process for C chains is similar in different plant species.     

Knowledge-based design of reagentless fluorescent biosensors from recombinant antibodies

The possibility of obtaining from any antibody a fluorescent conjugate which responds to the binding of the antigen by a variation of its fluorescence, would be of great interest in the analytical sciences and for the construction of protein chips. This possibility was explored with antibody mAbD1.3 directed against hen egg white lysozyme. Rules of design were developed to identify the residues of the antibody to which a fluorophore could be chemically coupled, after changing them to cysteine by mutagenesis. These rules were based on: the target residue belonging to a topological neighbourhood of the antigen in the structure of the complex between antibody and antigen; its absence of functional importance for the interaction with the antigen; and its solvent accessibility in the structure of the free antibody. Seventeen conjugates between the single-chain variable fragment scFv of mAbD1.3 and an environment-sensitive fluorophore were constructed. For six of the ten residues which fully satisfied the design rules, the relative variation of the fluorescence intensity between the free and bound states of the conjugate was comprised between 12 and 75% (in non-optimal buffer), and the affinity of the conjugate for lysozyme remained unchanged relative to the parental scFv. In contrast, such results were true for only one of the seven residues which failed to satisfy one of the rules and were used as controls. One of the conjugates was studied in more detail. Its fluorescence increased proportionally to the concentration of lysozyme in a nanomolar range, up to 90% in a defined buffer, and 40% in serum. This increase was specific for hen egg lysozyme and it was not observed with a closely related protein, turkey egg lysozyme. The residues which gave operational conjugates (six in V(L) and one in V(H)), were located in the immediate vicinity of residues which are functionally important, along the sequence of FvD1.3. The results suggest rules of design for constructing antigen-sensitive fluorescent conjugates from any antibody, in the absence of structural data.     

Rolling properties of rGPIbalpha-conjugated phospholipid vesicles with different membrane flexibilities on vWf surface under flow conditions

The recombinant fragment of the platelet membrane glycoprotein, rGPIbalpha, was conjugated to phospholipid vesicles with the average diameter of ca. 1 microm using N-succinimidyl 3-(2-pyridyldithio) propionate (SPDP). We used five kinds of rGPIbalpha-vesicles with different fluorescent anisotropies of 1,6-diphenyl-1,3,5-hexatriene (DPH) to study the rolling properties of the vesicles on the von Willebrand factor (vWf)-immobilized surface. Under flow conditions, the rolling velocity of the rGPIbalpha-vesicles decreased with the increasing membrane flexibility. It is considered that the vesicles with a high membrane flexibility have a high deformability and can be flattened to a high degree during rolling on the vWf surface, thus resulting in the large contact area. We obtained a recipe to control the rolling velocity of artificial platelets by membrane flexibility.     

Novel BOD (biological oxygen demand) sensor using mediator-less microbial fuel cell

A microbial fuel cell type of biosensor was used to determine the biochemical oxygen demand (BOD) of wastewater. The biosensor gave a good correlation between the BOD value and the coulomb produced. The BOD sensor has been operated for over 5 years in a stable manner without any servicing. This is much longer that that of previously reported BOD biosensors.     

Comparative study of different fluorescent dyes for the detection of proteins on membranes using the peroxyoxalate chemiluminescent reaction

We have previously shown that the bis(2,4,6-trichlorophenyl)oxalate (TCPO)-H(2)O(2) chemiluminescent reaction in acetone can be used for the detection of proteins labeled with the fluorescent reagent 2-methoxy-2,4-diphenyl-3(2H)-furanone (MDPF) on polyvinylidene difluoride (PVDF) membranes. To improve this method, in this work we have designed and constructed a cell that allows us to perform this chemiluminescent reaction on PVDF membranes with a homogeneous distribution of the reagents. Using this cell we have examined the analytical properties of several recently developed fluorescent protein dyes chemically different from MDPF. We have found that the metal chelate dye SYPRO Ruby can also be excited by the high-energy intermediate produced in the TCPO-H(2)O(2) reaction.