Applications of Phosphorene and Black Phosphorus in Energy Conversion and Storage Devices

The successful isolation of phosphorene (atomic layer thick black phosphorus) in 2014 has currently aroused the interest of 2D material researchers. In this review, first, the fundamentals of phosphorus allotropes, phosphorene, and black phosphorus, are briefly introduced, along with their structures, properties, and synthesis methods. Second, the readers are presented with an overview of their energy applications. Particularly in electrochemical energy storage, the large interlayer spacing (0.53 nm) in phosphorene allows the intercalation/deintercalation of larger ions as compared to its graphene counterpart. Therefore, phosphorene may possess greater potential for high electrochemical performance. In addition, the status of lithium ion batteries as well as secondary sodium ion batteries is reviewed. Next, each application for energy generation, conversion, and storage is described in detail with milestones as well as the challenges. These emerging applications include supercapacitors, photovoltaic devices, water splitting, photocatalytic hydrogenation, oxygen evolution, and thermoelectric generators. Finally the fast‐growing dynamic field of phosphorene research is summarized and perspectives on future possibilities are presented calling on the efforts of chemists, physicists, and material scientists     

不同纤维桩表面处理方式对牙根修复后抗折裂强度的影响

目的:探讨不同纤维桩表面处理方式对牙根修复后抗折裂强度的影响。方法:收集行正畸拔除的前磨牙120颗作为本研究样本,随机将120个纤维桩分为对照组、喷砂组和过氧化氢酸蚀组,每组40例。对照组纤维桩表明不给予任何处理,喷砂组给予氧化铝砂粒持续喷砂粗化处理,过氧化氢酸蚀组给予10%过氧化氢溶液处理,均包埋于纤维桩道预备好的离体牙内,采用相同树脂制备成核,行全冠修复与黏固,再模拟口腔内部环境给予样本牙冷热循环处理,经相同环境加载后,置于电子万能实验机获取样本牙抗折裂强度数据。对比三组离体牙样本体型数据、离体牙断裂方式、抗折裂强度,对三组进行为期24个月的定期随访,统计三组修复体断裂率,并采用Kaplan-Meier曲线和Log Rank法分析三组的生存状况。结果:三组的离体牙样本关于牙齿长度、牙根长度、颈部颊舌径及颈部近远中径对比差异无统计学意义(P0.05);喷砂组和过氧化氢酸蚀组的离体牙抗折裂强度显著强于对照组(P0.05);喷砂组和过氧化氢酸蚀组的牙齿折裂总发生率分别为20.00%和22.50%,均显著低于对照组的70.00%(P0.05)。但两组间比较差异无统计学意义(P0.05)。喷砂组、过氧化氢酸蚀组的生存状况显著优于对照组。结论:前磨牙修复过程中,对纤维桩表面进行喷砂或过氧化氢酸蚀处理均能提高牙根修复后抗折裂强度,改善修复体修复效果生存状况,且两种纤维桩表面处理方式对离体牙样本的断裂方式和抗折裂强度影响相当。     

Enabling Iron‐Based Highly Effective Electrochemical Water‐Splitting and Selective Oxygenation of Organic Substrates through In Situ Surface Modification of Intermetallic Iron Stannide Precatalyst

A strategy to overcome the unsatisfying catalytic performance and the durability of monometallic iron‐based materials for the electrochemical oxygen evolution reaction (OER) is provided by heterobimetallic iron–metal systems. Monometallic Fe catalysts show limited performance mostly due to poor conductivity and stability. Here, by taking advantage of the structurally ordered and highly conducting FeSn₂ nanostructure, for the first time, an intermetallic iron material is employed as an efficient anode for the alkaline OER, overall water‐splitting, and also for selective oxygenation of organic substrates. The electrophoretically deposited FeSn₂ on nickel foam (NF) and fluorine‐doped tin oxide (FTO) electrodes displays remarkable OER activity and durability with substantially low overpotentials of 197 and 273 mV at 10 mA cm^?2, respectively, which outperform most of the benchmarking NiFe‐based catalysts. The resulting superior activity is attributed to the in situ generation of α‐FeO(OH)@FeSn₂ where α‐FeO(OH) acts as the active site while FeSn₂ remains the conductive core. When the FeSn₂ anode is coupled with a Pt cathode for overall alkaline water‐splitting, a reduced cell potential (1.53 V) is attained outperforming that of noble metal‐based catalysts. FeSn₂ is further applied as an anode to produce value‐added products through selective oxygenation reactions of organic substrates.     

陆地棉主要纤维品质性状的基因效应估测

本文采用世代平均数遗传分析方法,沿用了加性-显性、加性-显性-上位性和环境(二种)×基因型三种模型,对陆地棉主要纤维品质性状中的长度、细度、强度和断裂长度的基因效应、年份效应以及年份×基因型互作进行了估测。经过三年的实验,选用三个杂交组合,每一组合含有P_1、p_2、F_1、F_2、B_1和B_2六个群体的资料。结果表明,四个纤维品质性状的遗传受加性、显性、上位性作用的共同控制,但在不同年份或不同的组合里,显性作用和上位性作用的变化较大;年份效应对品质性状的遗传也有较大影响,其影响方式主要以年份×基因型互作的形式表现。     

Unraveling Geometrical Site Confinement in Highly Efficient Iron‐Doped Electrocatalysts toward Oxygen Evolution Reaction

Introduction of iron in various catalytic systems has served a crucial function to significantly enhance the catalytic activity toward oxygen evolution reaction (OER), but the relationship between material properties and catalysis is still elusive. In this study, by regulating the distinctive geometric sites in spinel, Fe occupies the octahedral sites (Fe³⁺_(Oh)) and confines Co to the tetrahedral site (Co²⁺_(Td)), resulting in a strikingly high activity (η_{j = 10 mA cm}^?2 = 229 mV and η_{j = 100 mA cm}^?2 = 281 mV). Further enrichment of Fe ions would occupy the tetrahedral sites to decline the amount of Co²⁺_(Td) and deteriorate the OER activity. It is also found that similar tafel slope and peak frequency in Bode plot of electrochemical impedance spectroscopy indicate that Co²⁺_(Td) ions are primarily in charge of water oxidation catalytic center. By means of electrochemical techniques and in situ X‐ray absorption spectroscopy, it is proposed that Fe³⁺_(Oh) ions mainly confine cobalt ions to the tetrahedral site to restrain the multipath transfer of cobalt ions during the dynamic structural transformation between spinel and oxyhydroxide, continuously activating the catalytic behavior of Co²⁺_(Td) ions. This material‐related insight provides an indication for the design of highly efficient OER electrocatalysts.     

Barium Bismuth Niobate Double Perovskite/Tungsten Oxide Nanosheet Photoanode for High‐Performance Photoelectrochemical Water Splitting

Recently, a new method to effectively engineer the bandgap of barium bismuth niobate (BBNO) double perovskite was reported. However, the planar electrodes based on BBNO thin films show low photocurrent densities for water oxidation owing to their poor electrical conductivity. Here, it is reported that the photoelectrochemical (PEC) activity of BBNO‐based electrodes can be dramatically enhanced by coating thin BBNO layers on tungsten oxide (WO₃) nanosheets to solve the poor conductivity issue while maintaining strong light absorption. The PEC activity of BBNO/WO₃ nanosheet photoanodes can be further enhanced by applying Co_0.8Mn_0.2O_x nanoparticles as a co‐catalyst. A photocurrent density of 6.02 mA cm^?2 at 1.23 V (vs reversible hydrogen electrode (RHE)) is obtained using three optically stacked, but electrically parallel, BBNO/WO₃ nanosheet photoanodes. The BBNO/WO₃ nanosheet photoanodes also exhibit excellent stability in a high‐pH alkaline solution; the photoanodes demonstrate negligible photocurrent density decay while under continuous PEC operation for more than 7 h. This work suggests a viable approach to improve the PEC performance of BBNO absorber‐based devices.     

Adjusting the Anisotropy of 1D Sb2Se3 Nanostructures for Highly Efficient Photoelectrochemical Water Splitting

Sb₂Se₃ has recently spurred great interest as a promising light‐absorbing material for solar energy conversion. Sb₂Se₃ consists of 1D covalently linked nanoribbons stacked via van der Waals forces and its properties strongly depend on the crystallographic orientation. However, strategies for adjusting the anisotropy of 1D Sb₂Se₃ nanostructures are rarely investigated. Here, a novel approach is presented to fabricate 1D Sb₂Se₃ nanostructure arrays with different aspect ratios on conductive substrates by simply spin‐coating Sb‐Se solutions with different molar ratios of thioglycolic acid and ethanolamine. A relatively small proportion of thioglycolic acid induces the growth of short Sb₂Se₃ nanorod arrays with preferred orientation, leading to fast carrier transport and enhanced photocurrent. After the deposition of TiO₂ and Pt, an appropriately oriented Sb₂Se₃ nanostructure array exhibits a significantly enhanced photoelectrochemical performance; the photocurrent reaches 12.5 mA cm^?2 at 0 V versus reversible hydrogen electrode under air mass 1.5 global illumination.     

Impact of Hydroxylation and Hydration on the Reactivity of α‐Fe2O3 (0001) and (102) Surfaces under Environmental and Electrochemical Conditions

Hematite (α‐Fe₂O₃) is widely used as a catalytic electrode material in photo‐electrochemical water oxidation, where its surface compositions and stabilities can strongly impact the redox reaction process. Here, its surface configurations in environmental or electrochemical conditions are assessed via density functional theory (DFT) calculations conducted at the Perdew, Burke, and Ernzerhof (PBE)+U level. The most energetically favorable surface domains of α‐Fe₂O₃ (0001) and (102) are predicted by constructing the surface phase diagrams in the framework of first‐principle thermodynamics. The relative surface stabilities are investigated as a function of partial pressures of oxygen and water, temperature, solution pH, and electrode potential not only for perfect bulk terminations but also for defect‐containing surfaces having various degrees of hydroxylation and hydration. In order to assess the impact on the redox reactions of the surface planes as well as of the extent of surface hydration/hydroxylation, the thermodynamics of the four‐step oxygen evolution reaction (OER) mechanism are examined in detail for different models of the α‐Fe₂O₃ (0001) and (102) surfaces. Importantly, the results underline that the nature of the surface termination and the degree of near‐surface hydroxylation give rise to significant variations in the OER overpotentials.     

Electroless Plating of Highly Efficient Bifunctional Boride‐Based Electrodes toward Practical Overall Water Splitting

Exploring highly‐efficient and low‐cost electrodes for both hydrogen and oxygen evolution reaction (HER and OER) is of primary importance to economical water splitting. Herein, a series of novel and robust bifunctional boride‐based electrodes are successfully fabricated using a versatile Et₂NHBH₃‐involved electroless plating (EP) approach via deposition of nonprecious boride‐based catalysts on various substrates. Owing to the unique binder‐free porous nodule structure induced by the hydrogen release EP reaction, most of the nonprecious boride‐based electrodes are highly efficient for overall water splitting. As a distinctive example, the Co‐B/Ni electrode can afford 10 mA cm^?2 at overpotentials of only 70 mV for HER and 140 mV for OER, and can also survive at large current density of 1000 mA cm^?2 for over 20 h without performance degradation in 1.0 m KOH. Several boride‐based two‐electrode electrolyzers can achieve 10 mA cm^?2 at low voltages of around 1.4 V. Moreover, the facile EP approach is economically viable for flexible and large size electrode production.     

Tin Oxide as a Protective Heterojunction with Silicon for Efficient Photoelectrochemical Water Oxidation in Strongly Acidic or Alkaline Electrolytes

Photoelectrodes without a p–n junction are often limited in efficiency by charge recombination at semiconductor surfaces and slow charge transfer to electrocatalysts. This study reports that tin oxide (SnO_x) layers applied to n‐Si wafers after forming a thin chemically oxidized SiO_x layer can passivate the Si surface while producing ≈620 mV photovoltage under 100 mW cm^?2 of simulated sunlight. The SnO_x layer makes ohmic contacts to Ni, Ir, or Pt films that act as precatalysts for the oxygen‐evolution reaction (OER) in 1.0 m KOH(aq) or 1.0 m H₂SO₄(aq). Ideal regenerative solar‐to‐O₂(g) efficiencies of 4.1% and 3.7%, respectively, are obtained in 1.0 m KOH(aq) with Ni or in 1.0 m H₂SO₄(aq) with Pt/IrO_x layers as OER catalysts. Stable photocurrents for >100 h are obtained for electrodes with patterned catalyst layers in both 1.0 m KOH(aq) and 1.0 m H₂SO₄(aq).