Study of physiopathological phenomena in dental enamel by neutron activation analysis

An epithermal neutron activation method is used to determine the concentration of mineral elements in human dental enamel. A large number (252) of samples from ancient and modern origins are analyzed. The analytical results are mathematically processed using a statistical multivariant method. This allows to differentiate deciduous from permanent teeth and decayed from sound enamel. It is also possible to distinguish the teeth coming from two different necropoles. The origin and the localization of determined elements in the mineralized part, or in the aqueous-organic part, of enamel is suggested. Their role, as witnessed in the physiopathological phenomena of dental enamel, is discussed.     

Improvement of production,assay and purification of streptavidin

Summary The production of streptavidin byStreptomyces avidinii in several different media was examined at 24, 48 and 72 hours. Flask studies indicated that fermentation media containing either complex or multiple carbon sources resulted in higher yields of streptavidin than media with a single carbon source. Streptavidin could be detected in crude fermentation broths by use of a tritiated biotin binding assay. This assay appears to give useful estimates of streptavidin production. Depending upon the medium employed, streptavidin yields ranged from 0.5 mg/l to 53 mg/l. Production was successfully scaled up to ten liter fermentors. Streptavidin was purified in a one step process from centrifuged, concentrated fermentation broths by binding the protein to an iminobiotin column at pH 11 followed by elution at pH 4.0. Recovery percentages varied depending upon the solubility of the fermentation media ingredients.     

Demography,genealogy and genetics. The reproductive process in the populations of two French Mountain Valleys from the seventeenth to the twentieth century

An exhaustive analysis of registers of births, deaths, and marriages is used to reconstitute genealogies, both ascending and descending, for all individuals who lived in two mountain valleys: the Valserine valley (in the French Jura), which is studied from the end of the seventeenth century to the present, and the Vallouise valley (in the French Alps) studied from the seventeenth to the nieteenth centuries. This genealogical approach makes it possible to trace the reproductive process in the populations whose members lived in the valley for several generations. The Vallouise valley forms an important demographic isolate; nearly 98 per cent of those born between 1820 and 1849 were descendants of ancestors who had lived in the valley two centuries earlier. By contrast, there has been continuous immigration into the Valserine valley, which has resulted in a constant renewal of the gene pool. Only 18 per cent of the gene pool of individuals living in this valley two centuries later was contributed by those who lived in the valley and who were born before 1750.     

Engineering challenges in high density cell culture systems

High density cell culture systems offer the advantage of production of bio-pharmaceuticals in compact bioreactors with high volumetric production rates; however, these systems are difficult to design and operate. First of all, the cells have to be retained in the bioreactor by physical means during perfusion. The design of the cell retention is the key to performance of high density cell culture systems. Oxygenation and media design are also important for maximizing the cell number. In high density perfusion reactors, variable cell density, and hence the metabolic demand, require constant adjustment of perfusion rates. The use of cell specific perfusion rate (CSPR) control provides a constant environment to the cells resulting in consistent production. On-line measurement of cell density and metabolic activities can be used for the estimation of cell densities and the control of CSPR. Issues related to mass transfer and mixing become more important at high cell densities. Due to the difference in mass transfer coefficients for oxygen and CO₂, a significant accumulation of dissolved CO₂ is experienced with silicone tubing aeration. Also, mixing is observed to decrease at high densities. Base addition, if not properly done, could result in localized cell lysis and poor culture performance. Non-uniform mixing in reactors promotes the heterogeneity of the culture. Cell aggregation results in segregation of the cells within different mixing zones. This paper discusses these issues and makes recommendations for further development of high density cell culture bioreactors.     

无色素腺棉籽蛋白粉与棉子油的制备

低棉酚棉籽为高蛋白含油的植物资源,适宜于水溶法制备油及蛋白粉,出油率一般可达９５％。     

南瓜果肉色素的提取及稳定性的研究

本文研究了从南瓜果肉中提取色素的方法,并对它的光、热、酸、碱稳定性进行了研究,发现其性质较稳定,且原料来源广泛,提取工艺简单,着色效果好,是食品、医药、化妆品等领域的理想添加剂。     

Factors affecting gene delivery by particle bombardment ofDendrobium orchids

Summary Five parameters were examined for their effect on transformation ofDendrobium tissues by microprojectile bombardment. The superpromoter in pBI426 produced at least 1.5 times as many transient transformants as the single cauliflower mosaic virus 35S promoter in pBI121 (37 to 69% vs. 0 to 44%) with dark and frequent GUS (β-glucuronidase) staining. Tissue, genotype, and type of microparticle significantly affected transient GUS activity. Higher expression was seen in protocormlike bodies and in hybrid UH44 compared to etiolated shoots and protocorms and to hybrids M61 and K1329-39. Microparticles of 1.6-μm Bio-Rad gold were more effective than 1.0-μm ASI gold. Transient GUS activity did not differ among protocormlike bodies bombarded using helium propellant pressures of 650, 900, or 1100 psi. Transgenic plants were recovered fromDendrobium UH800 protocormlike bodies bombarded with pBI426-coated, 1.1-μm tungsten particles using an early-model gunpowder-driven apparatus with an estimated stable transformation rate of 11.7%. One transgenic plant ofDendrobium UH44 was recovered from etiolated shoot explants bombarded with pBI121-coated, 1.1-μm tungsten particles using the Dupont PDS-1000 with a stable transformation rate of 0.17%. Positive selection results showed 100 to 200 mg·liter⁻¹ kanamycin to be appropriate for regeneration of transgenic plants from protocormlike bodies, protocorms, and etiolated shoot explants over a 3- to 9.5-mo. period.