Circadian Modulation of Cold-Induced Thermogenesis in the Golden Hamster

The relationship between the circadian and homeostatic control of body temperature was studied in golden hamsters maintained under a 14:10 LD cycle. Telemetric records of body temperature showed that body temperature oscillates daily with a low phase during the light section of the LD cycle and a high phase during the dark section. The low phase of the temperature rhythm was found to start two hours after lights on and to last about 8 hours. The high phase was found to start immediately after lights off and to last about 8 hours also. Metabolic heat production was measured by indirect calorimetry during the high phase and the low phase of the body temperature rhythm. Heat production in a thermoneutral environment was higher during the high phase of the body temperature rhythm than during the low phase, but cold-induced thermogenesis was greater during the low phase than during the high phase. This finding suggests that the autonomic thermoregulatory system is more responsive to cold stress during the low phase than during the high phase. Consequently, the daily oscillation of body temperature cannot be explained by an elevation of the thermoregulatory set point during the high phase of the rhythm. The homeostatic and circadian control of body temperature seem to be exerted separately from each other.     

Circadian Temperature and Activity Rhythms in Mice under Free-Running and Entrained Conditions; Assessment after Purification of the Temperature Rhythm

Six female mice were studied separately for six weeks, first in constant light (300 lx), and then on a 12 : 12 L : D schedule (light on 07:00–19:00–h). Food and water were available ad libitum. Abdominal temperature and spontaneous locomotor activity were measured every 10 min. In constant light, the animals free-ran with both temperature and activity records showing circadian rhythms that were significantly greater than 24 h; by contrast, in the LD schedule, the circadian rhythms had become entrained and showed a stable phase relation to this schedule. The direct masking effects upon raw temperatures caused by bursts of activity were clearly seen, and could be removed by a process of ‘purification’. A comparison of the activity profiles during the entrained and free-running phases showed that the imposed light-dark cycle resulted in decreased activity in the light, increased activity in the dark, and bursts of activity at the light-dark and dark-light transitions. Masking effects due to the activity profile were present in the raw temperature profile, and many could be removed by purification using the activity profile; however, there was evidence that other masking effects, independent of activity, were present also. The efficacy of thermoregulatory compensation, as assessed from the rise of core temperature produced by spontaneous locomotor activity, was, in comparison with the free-running condition, increased in the dark phase and decreased in the light phase; this would appear to be one way to limit the temperature rise that occurs in the active phase of the rest-activity cycle.     

Ecology and Behaviour of Burton's Legless Lizard(Lialis burtonis,Pygopodidae) in Tropical Australia

The elongate, functionally limbless flap-footed lizards(family Pygopodidae) are found throughout Australia, ranging into southern New Guinea. Despite their diversity and abundance in most Australian ecosystems, pygopodids have attracted little scientific study. An intensive ecological study of one pygopodid, Burton's legless lizard(Lialis burtonis Gray 1835), was conducted in Australia's tropical Northern Territory. L. burtonis eats nothing but other lizards, primarily skinks, and appears to feed relatively infrequently(only 20.8% of stomachs contained prey). Ovulation and mating occur chiefly in the late dry-season(beginning around September), and most egg-laying takes place in the early to middle wet-season(November–January). Females can lay multiple clutches per year, some of which may be fertilised with stored sperm. Free-ranging L. burtonis are sedentary ambush foragers, with radio-tracked lizards moving on average 5 m/day. Most foraging is done diurnally, but lizards may be active at any time of day or night. Radiotracked lizards were usually found in leaf-litter microhabitats, a preference that was also evident in habitat-choice experiments using field enclosures. Lizards typically buried themselves in 6–8 cm of litter; at this depth, they detect potential prey items while staying hidden from predators and prey and avoiding lethally high temperatures.     

Dynamic Modeling and Experiment of a Fish Robot with a Flexible Tail Fin

This paper presents the dynamic modeling of a flexible tail for a robotic fish. For this purpose firstly, the flexible tail was simplified as a slewing beam actuated by a driving moment. The governing equation of the flexible tail was derived by using the Euler-Bernoulli theory. In this equation, the resistive forces were estimated as a term analogous to viscous damping. Then, the modal analysis method was applied in order to derive an analytical solution of the governing equation, by which the relationship between the driving moment and the lateral movement of the flexible tail was described. Finally, simulations and experiments were carried out and the results were compared to verify the accuracy of the dynamic model. It was proved that the dynamic model of a fish robot with a flexible tail fin well explains the real behavior of robotic fish in underwater environment.     

Assaying Predatory Feeding Behaviors in Pristionchus and Other Nematodes

This protocol provides multiple methods for the analysis and quantification of predatory feeding behaviors in nematodes. Many nematode species including Pristionchus pacificus display complex behaviors, the most striking of which is the predation of other nematode larvae. However, as these behaviors are absent in the model organism Caenorhabditis elegans, they have thus far only recently been described in detail along with the development of reliable behavioral assays ¹. These predatory behaviors are dependent upon phenotypically plastic but fixed mouth morphs making the correct identification and categorization of these animals essential. In P. pacificus there are two mouth types, the stenostomatous and eurystomatous morphs ², with only the wide mouthed eurystomatous containing an extra tooth and being capable of killing other nematode larvae. Through the isolation of an abundance of size matched prey larvae and subsequent exposure to predatory nematodes, assays including both "corpse assays" and "bite assays" on correctly identified mouth morph nematodes are possible. These assays provide a means to rapidly quantify predation success rates and provide a detailed behavioral analysis of individual nematodes engaged in predatory feeding activities. In addition, with the use of a high-speed camera, visualization of changes in pharyngeal activity including tooth and pumping dynamics are also possible.     

Foraging success under uncertainty: search tradeoffs and optimal space use

Understanding the structural complexity and the main drivers of animal search behaviour is pivotal to foraging ecology. Yet, the role of uncertainty as a generative mechanism of movement patterns is poorly understood. Novel insights from search theory suggest that organisms should collect and assess new information from the environment by producing complex exploratory strategies. Based on an extension of the first passage time theory, and using simple equations and simulations, we unveil the elementary heuristics behind search behaviour. In particular, we show that normal diffusion is not enough for determining optimal exploratory behaviour but anomalous diffusion is required. Searching organisms go through two critical sequential phases (approach and detection) and experience fundamental search tradeoffs that may limit their encounter rates. Using experimental data, we show that biological search includes elements not fully considered in contemporary physical search theory. In particular, the need to consider search movement as a non‐stationary process that brings the organism from one informational state to another. For example, the transition from remaining in an area to departing from it may occur through an exploratory state where cognitive search is challenged. Therefore, a more comprehensive view of foraging ecology requires including current perspectives about movement under uncertainty.     

Seasonal trend in movement directions at dawn and dusk: a study on crow and white herons

Crows (Corvus splendens) and white herons (Ardea alba) inhabit the agricultural landscapes nearby human habitats which represent dynamic ecosystem and show seasonal crop patterns. We studied the movement pattern in these birds at dawn and dusk, during solstices (December and June) and equinoxes (March and September). The movement directions were changed from uniform at dawn to a concentrated distribution at dusk all along the season suggesting that morning movements are more exploratory than evening with seasonal differences. Differential use of directions in December than June could be the effect of temperature, food availability or wind direction and speed. During breeding, less number of directions used suggests that birds might be moving towards the directions having high probability of food availability. It is likely that avian dispersal in space and time is dependent on the food availability however, further studies are required to be carried out.     

Mating games squid play: reproductive behaviour and sexual skin displays in Caribbean reef squid Sepioteuthis sepioidea

Observation of the sexual interactions of Sepioteuthis sepioidea squid during the short reproductive stage of their lives showed a scramble competition system, with both male and female polygyny. Mature females were faithful to a specific location in the daytime, whereas males moved from group to group and formed short-term consortships with females. Males defended females from other males, particularly with an agonistic Zebra display. Male–female pairs exchanged Saddle-Stripe displays, after which males might display an on–off Flicker. There was considerable female choice. Only if a female responded to this display with a parallel Rocking action would she pair and would the male deposit spermatophores at the base of her arms, and only 50% of the time did females move the spermatophores internally to where sperm might be released and stored in the oviducal gland for later fertilization of eggs. This long-term set of interactions and solitary deposition of hidden egg strings contrasts with the attraction of both sexes to a common ‘egg mop’ laid by many females which was a site of competition in other loliginid squid. Since Sepioteuthis is a primitive genus within the family Loliginidae, it may represent a generalist reproductive strategy that evolved into a specialized localization one.     

Computer simulation of orthodontic tooth movement using CT image-based voxel finite element models with the level set method

Orthodontic tooth movement (OTM) is an adaptive biomechanical response of dentoalveolar components to orthodontic forces, in which remodeling of the alveolar bone occurs in response to changes in the surrounding mechanical environment. In this study, we developed a framework for OTM simulation by combining an image-based voxel finite element method, with a surface-tracking level set method using three-dimensional computer models. For a case study to demonstrate its capability of expressing clinical tooth movement, we observed displacement and rotation of the tooth under three types of force conditions. The simulation results demonstrate that the proposed simulation method has the potential to predict clinical OTM.     

Comparison of methods to determine the centre of resistance of teeth

In orthodontic treatment, the locations of the centre of resistance (CR) of individual teeth and the applied load system are the major determinants for the type of tooth movement achieved. Currently, CR locations have only been specified for a relatively small number of tooth specimen for research purposes. Analysing cone beam computed tomography data samples from three upper central incisors, this study explores whether the effort to establish accurate CR estimates can be reduced by (i) morphing a pre-existing simplified finite element (FE) mesh to fit to the segmented 3D tooth-bone model, and (ii) individualizing a mean CR location according to a small parameter set characterising the morphology of the tooth and its embedding. The FE morphing approach and the semi-analytical approach led to CR estimates that differ in average only 0.04 and 0.12 mm respectively from those determined by very time-consuming individual FE modelling (standard method). Both approaches may help to estimate the movement of individual teeth during orthodontic treatment and, thus, increase the therapeutic efficacy.