L(+)-lactate dehydrogenase of Clostridium acetobutylicum is activated by fructose-1,6-bisphosphate

Cells of Clostridium acetobutylicum contained an NADH-dependent L(+)-lactate dehydrogenase which was activated specifically by fructose-1,6-bisphosphate (F-1,6-P₂), with calcium or magnesium ions as positive effectors. During the purification steps the enzyme was very unstable. The purified enzyme existed in a tetrameric structure (apparent M_r of about 159 kDa) and had its pH optimum at pH 5.8. Little activity was left at pH values below 5.0. The enzyme was unidirectional, catalysing only the reduction of pyruvate. The half maximal activation of the reaction velocity with F-1,6-P₂ depended on the pyruvate concentration.     

醋酸纤维素膜为基础的葡萄糖生物传感器的研制

用共价法将酶固定在醋酸纤维素膜上,方法简便易行,制造的酶膜稳定,比活力高。同时采用该方法制备了葡萄糖氧化酶酶膜,与氧电极组装成测定葡萄糖的生物传感器,线性范围为50~800mg／dl,仪器工作的最适pH为6．0,最适温度为40℃。将该膜与过氧化氢电极组装得到的传感器具有以下特性：线性范围为10~200mg／dl,最适pH为6．0,测定结果与酶试制盒有良好相关性。     

表面改性SBA-15材料固载猪胰脂肪酶

采用试剂y-氯丙基三乙氧基硅烷（cvrEs）对介孔硅材料SBA-15进行表面改性,并通过红外图谱（FT-IR）和N2吸附脱附等温图（BET）对其进行表征。结果表明：改性前原材料的比表面积为460．9m2／g,改性后材料比表面积提高到512．0m2／g。利用改性前和改性后的SBA-15对猪胰脂肪酶进行固载实验,并对实验结果进行比较,发现改性后的SBA-15在脂肪酶活性、pH环境适应性、热耐受性和可操作性都优于改性前的SBA-15,在最优条件下的酶活力提高超过60％。     

Optimization of conditions for the enzymatic hydrolysis of phytoestrogen conjugates in urine and plasma

Optimal pH, temperature, and concentration of enzyme conditions for the rate of hydrolysis of five isoflavone conjugates (daidzein, O-desmethylangolensin, equol, genistein, and glycitein) and two lignans (enterodiol and enterolactone) from two biological matrices (urine and plasma) were studied using beta-glucuronidase from Helix pomatia. In addition, the use of mixtures of beta-glucuronidase and sulfatase enzymes from different sources was investigated to find enzyme preparations that contained lower amounts of naturally present phytoestrogens. Quantification of aglycones spiked with (13)C(3)-labeled internal standards was carried out by LC-MS/MS. In urine, all of the phytoestrogen conjugates hydrolyzed within 2h under standard hydrolysis conditions (24mul H. pomatia, pH 5, 37 degrees C). Hydrolysis rates were improved at 45 degrees C and by doubling the enzyme concentration and may be used to further reduce hydrolysis times down to 100min. In plasma, a 16-h hydrolysis was required to ensure complete hydrolysis of all conjugates. As with urine, the use of increased temperature or increased enzyme concentration reduced hydrolysis times for most analytes. However, the rate of hydrolysis in plasma was significantly slower than that in urine for all analytes except enterodiol, for which the reverse was true. Neither increased temperature nor increased enzyme concentration increased the rate of hydrolysis of enterolactone. Hydrolysis at pH 6 proved to be detrimental to hydrolysis of phytoestrogen conjugates, especially those in plasma. Other enzyme preparations from different sources, such as beta-glucuronidase from Escherichia coli, were found to contain lower amounts of contaminating phytoestrogens and showed increased enzyme activity for isoflavones, but lower activity for lignans, when used with other sulfatase enzymes. In addition, this involved complicating the analytical procedure through using mixtures of enzymes. Therefore, the use of beta-glucuronidase from H. pomatia combined with an enzyme "blank" to correct for phytoestrogen contamination was shown to be a suitable method for hydrolysis of phytoestrogens.     

中华蟾蜍消化道6种酶的组织化学定位

目的研究中华蟾蜍消化道酸性磷酸酶(ACP)、碱性磷酸酶(ALP)、腺苷三磷酸酶(ATPase)、非特异性酯酶(NSE)、过氧化物酶(POX)和琥珀酸脱氢酶(SDH)等6种酶的分布。方法在消化道的8个部位取材,采用冰冻切片技术、石蜡切片技术、酶的组织化学方法和光密度定量分析。结果 ACP主要分布于胃贲门中贲门腺部,十二指肠和回肠中酶反应呈弱阳性。ALP主要分布于食管、十二指肠至回肠的粘膜上皮,十二指肠酶活性最高。ATPase在消化道各部位均有分布,胃中胃腺部和回肠粘膜上皮酶活性显著较高(P0.05)。NSE和POX在整个消化道粘膜上皮和粘膜固有层均有分布,胃各部位酶活性显著较低(P0.05)。SDH除在食管和直肠酶活性显著较低外,其它部位均有大量分布,十二指肠和回肠酶活性显著较高(P0.05)。结论中华蟾蜍消化道粘膜6种酶的分布同其它动物有相似之处,也有其自身特点。6种酶在消化道中的分布与消化道各部位的生理机能密切相关。     

Properties of L-arabinose isomerase from Escherichia coli as biocatalyst for tagatose production

L-arabinose isomerase (EC 5.3.1.4) mediates the isomerization of D-galactose into D-tagatose as well as the conversion of L-arabinose into L-ribulose. To investigate the properties of L-arabinose isomerase as a biocatalyst for the conversion of galactose to tagatose, the L-arabinose isomerase of Escherichia coli was characterized. The substrate specificity for L-arabinose was 166-fold higher than that for D-galactose. The optimal pH and temperature for the galactose isomerization reaction were 8.0 and 30 °C, respectively. The enzyme activity was stable for 1 h at temperatures below 35 °C and within a pH range of 8–10. The Michaelis constant, K _m, for galactose was 1480 mM, which is 25-fold higher than that for arabinose. The addition of Fe²⁺ and Mn²⁺ ions enhanced the conversion of galactose to tagatose, whereas the addition of Cu²⁺, Zn²⁺, Hg²⁺, and Fe³⁺ ions inhibited the reaction completely. In the presence of 1 mM Fe²⁺ ions, the K _m for galactose was found to be 300 mM.     

新型生物微胶囊体系的生物相容性研究

一种由硫酸纤维素钠(NaCS)和聚二丙烯基二甲基氯化铵(PDADMAC)形成的新型生物微胶囊已开始被用于生物物质的固定化。根据生物物质生长的情况,考察了这两种固定化材料各自对微生物和动物细胞生长的副作用及由NaCS和PDADMAC形成的微胶囊对微生物细胞生长的影响。实验结果表明这个新微胶囊体系具有良好的生物相容性。     

Multi-point enzyme immobilization,surface chemistry,and novel platforms: a paradigm shift in biocatalyst design

Engineering enzymes with improved catalytic properties in non-natural environments have been concerned with their diverse industrial and biotechnological applications. Immobilization represents a promising but straightforward route, and immobilized biocatalysts often display higher activities and stabilities compared to free enzymes. Owing to their unique physicochemical characteristics, including the high-specific surface area, exceptional chemical, electrical, and mechanical properties, efficient enzyme loading, and multivalent functionalization, nano-based materials are postulated as suitable carriers for biomolecules or enzyme immobilization. Enzymes immobilized on nanomaterial-based supports are more robust, stable, and recoverable than their pristine counterparts, and are even used for continuous catalytic processes. Furthermore, the unique intrinsic properties of nanomaterials, particularly nanoparticles, also confer the immobilized enzymes to be used for their broader applications. Herein, an effort has been made to present novel potentialities of multi-point enzyme immobilization in the current biotechnological sector. Various nano-based platforms for enzyme/biomolecule immobilization are discussed in the second part of the review. In summary, recent developments in the use of nanomaterials as new carriers to construct robust nano-biocatalytic systems are reviewed, and future trends are pointed out in this article.     

Design and characterization of a prototype enzyme microreactor: Quantification of immobilized transketolase kinetics

In this work, we describe the design of an immobilized enzyme microreactor (IEMR) for use in transketolase (TK) bioconversion process characterization. The prototype microreactor is based on a 200‐μm ID fused silica capillary for quantitative kinetic analysis. The concept is based on the reversible immobilization of His₆‐tagged enzymes via Ni‐NTA linkage to surface derivatized silica. For the initial microreactor design, the mode of operation is a stop‐flow analysis which promotes higher degrees of conversion. Kinetics for the immobilized TK‐catalysed synthesis of L ‐erythrulose from substrates glycolaldehyde (GA) and hydroxypyruvate (HPA) were evaluated based on a Michaelis–Menten model. Results show that the TK kinetic parameters in the IEMR (V_max(app) = 0.1 ± 0.02 mmol min^–1, K_m(app) = 26 ± 4 mM) are comparable with those measured in free solution. Furthermore, the k_cat for the microreactor of 4.1 × 10⁵ s^?1 was close to the value for the bioconversion in free solution. This is attributed to the controlled orientation and monolayer surface coverage of the His₆‐immobilized TK. Furthermore, we show quantitative elution of the immobilized TK and the regeneration and reuse of the derivatized capillary over five cycles. The ability to quantify kinetic parameters of engineered enzymes at this scale has benefits for the rapid and parallel evaluation of evolved enzyme libraries for synthetic biology applications and for the generation of kinetic models to aid bioconversion process design and bioreactor selection as a more efficient alternative to previously established microwell‐based systems for TK bioprocess characterization. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Structural and functional characterization of polyethylene terephthalate hydrolase from Ideonella sakaiensis

Polyethylene terephthalate (PET) hydrolase from Ideonella sakaiensis (IsPETase) can be used to degrade PET. In order to use IsPETase in industry, we studied the enzymatic activity of IsPETase in different conditions containing environmental and physicochemical factors commonly found in nature. We observed that salts and glycerol enhanced the enzymatic activity, while detergents and organic solvents reduced the enzymatic activity. IsPETase hydrolyzed p-nitrophenyl (p-NP) esters instead of naphthyl esters. To make IsPETase an enzyme capable of hydrolyzing naphthyl esters, site-directed mutagenesis was carried out based on the structural information provided by the crystal structure. We found that the IsPETase^S93M, IsPETase^W159F, and IsPETase^N241F mutants can hydrolyze naphthyl esters. IsPETase engineering can direct researchers to use this α/β-hydrolase protein scaffold to design enzymes that can hydrolyze a variety of polyesters.