Ecological total-factor energy efficiency of China’s energy intensive industries

This paper uses a meta-frontier slack-based DEA model to measure the ecological total-factor energy efficiency as well as the energy conservation potential of China’s four energy intensive subsectors. We incorporate both desirable and undesirable output together in the period, 2000–2013. The conclusions are: firstly, under the meta-frontier, the four subsectors of energy intensive industries have low average level of ecological total-factor energy efficiencies. They are 0.137, 0.212, 0.238, and 0.307 in the non-metallic mineral products manufacturing industry, raw chemical materials and chemical products manufacturing industry, smelting and pressing of ferrous metals industry, and smelting and pressing of non-ferrous metals industry, respectively. Secondly, the ecological energy efficiency in East China is the highest among three regions. Central China and West China are behind, but they are extremely close to each other. Thirdly, East China almost has no technology gap pertaining to energy efficiency, while Central China and West China almost have the same gap. Finally, Sichuan is considered to be the best province in West China under group frontier due to its perform in the three energy intensive subsectors. For Central and East China, no province has higher ecological energy efficiency in more than two energy intensive subsectors.     

Determination of metabolic equivalents during low- and high-intensity resistance exercise in healthy young subjects and patients with type 2 diabetes

The purpose of this study was to quantify the metabolic equivalents (METs) of resistance exercise in obese patients with type 2 diabetes (T2DM) and healthy young subjects and to evaluate whether there were differences between sessions executed at low- versus high-intensity resistance exercise. Twenty obese patients with T2DM (62.9±6.1 years) and 22 young subjects (22.6±1.9 years) performed two training sessions: one at vigorous intensity (80% of 1-repetition maximum (1RM)) and one at moderate intensity (60% of 1RM). Both groups carried out three strength exercises with a 2-day recovery between sessions. Oxygen consumption was continuously measured 15 min before, during and after each training session. Obese T2DM patients showed lower METs values compared with young healthy participants at the baseline phase (F= 2043.86; P<0.01), during training (F=1140.59; P<0.01) and in the post-exercise phase (F=1012.71; P<0.01). No effects were detected in the group x intensity analysis of covariance. In this study, at both light-moderate and vigorous resistance exercise intensities, the METs value that best represented both sessions was 3 METs for the obese elderly T2DM patients and 5 METs for young subjects.     

医药 CRO 专题报告——蓝海市场，强者恒强

随着全球制药企业研发投资成本加大、研发周期变长、研发成功率降低,作为社会分工专业化的产物,CRO 企业凭借其低成本、高效率、 多服务的特点,快速发展,且服务范畴已涵盖药物研发的整个过程,成为医药研发产业链中不可缺少的环节。报告采用文献调研、数据库检索、 数据统计与分析等定性定量研究方法,从发展概况、发展策略、竞争格局、企业布局等角度对国内外医药 CRO 领域进行多角度、多层次的 分析,旨在为相关企业确定产品研发思路、制定市场策略提供线索和参考。     

毕赤酵母GS115表达HSA-GCSFm的诱导工艺研究

本文探讨了甲醇流加控制、添加胰蛋白胨和甲醇/山梨醇共混诱导对重组毕赤酵母GS115/pPIC9K-HSA-GCSFm表达HSA-GCSFm的影响.结果显示:甲醇供应充足条件下HSA-GCSFm表达水平仅为37 mg·L-1,而甲醇添加受限条件下HSA-GCSFm表达水平可达到239mg·L-1;甲醇添加受限并添加胰蛋白胨条件下,HSA-GCSFm表达水平可以提高到266 mg·L-1;在此基础上,流加山梨醇作为辅助碳源,表达水平可大幅提高至424 mg·L-1.通过对各诱导条件下OUR、胞外蛋白酶及碳流分配进行分析后发现,将甲醇限制在低浓度同时添加胰蛋白胨与山梨醇,可以改善细胞代谢活性,增加细胞用于HSA-GCSFm合成的碳流分配量,降低胞外蛋白酶活性,从而提高了HSA-GCSFm的表达水平并缓解了HSA-GCSFm的降解.因此,该诱导工艺适于毕赤酵母高效表达HSA-GCSFm.     

生境异质性对鼎湖山常绿阔叶林群落功能多样性的影响

物种共存机制一直以来是群落生态学的研究热点。为了探讨异质生境条件下鼎湖山常绿阔叶林群落功能多样性变化,找到其变化的主要环境驱动因子,该研究利用位于鼎湖山20 hm~2监测样地第2次群落调查数据并选择代表不同生境(海拔和地形)的27个样方(20 m×20 m),于2013年夏季在样地内所选样方中测定所有胸径≥1 cm树种的叶片功能性状。所测性状包括形态学性状(比叶面积、叶片干物质含量、叶面积以及叶片长宽比)和化学计量学性状(叶片碳、氮、磷的含量),结合地形和土壤数据并通过分析功能多样性随环境梯度的变化,探讨了环境过滤和竞争在鼎湖山群落物种共存中的相对重要性。结果表明:功能分歧度和群落权重平均值与环境因素关系密切,尤其是海拔、凹凸度和土壤养分。环境条件较好区域(微尺度高海拔、高凹凸度和土壤养分含量)的植物采取统一的养分有效保存(低SLA,高LDMC)的适应策略(功能分歧度低),环境过滤所起作用更强;植物在相反的环境条件下,采取快速生长策略(高SLA,低LDMC),能够更好地适应环境的变化,且性状变化是多样的(功能分歧度高),在该条件下竞争作用更为显著。叶面积和叶片氮含量的分歧度在环境条件较好的区域增大,这与其他功能性状不一致,说明不同生态位轴(环境因素)影响不同性状的分歧度变化,并且在局域尺度上植物为了更好地适应环境变化采取了多样的适应策略。     

Adaptations to isolated shoulder fatigue during simulated repetitive work. Part I: Fatigue

Upper extremity muscle fatigue is challenging to identify during industrial tasks and places changing demands on the shoulder complex that are not fully understood. The purpose of this investigation was to examine adaptation strategies in response to isolated anterior deltoid muscle fatigue while performing simulated repetitive work. Participants completed two blocks of simulated repetitive work separated by an anterior deltoid fatigue protocol; the first block had 20 work cycles and the post-fatigue block had 60 cycles. Each work cycle was 60 s in duration and included 4 tasks: handle pull, cap rotation, drill press and handle push. Surface EMG of 14 muscles and upper body kinematics were recorded. Immediately following fatigue, glenohumeral flexion strength was reduced, rating of perceived exertion scores increased and signs of muscle fatigue (increased EMG amplitude, decreased EMG frequency) were present in anterior and posterior deltoids, latissimus dorsi and serratus anterior. Along with other kinematic and muscle activity changes, scapular reorientation occurred in all of the simulated tasks and generally served to increase the width of the subacromial space. These findings suggest that immediately following fatigue people adapt by repositioning joints to maintain task performance and may also prioritize maintaining subacromial space width.     

宝石能谱CT评估冠状动脉介入治疗术后支架内成像质量的研究

目的:探讨宝石能谱CT用于冠状动脉支架内成像质量评估的应用价值。方法:回顾分析56例冠状动脉支架植入后患者,按照支架厚度及直径分成四组。采用宝石能谱CT对冠状动脉成像及同时进行冠状动脉造影患者的影像学资料,通过分析宝石能谱CT的冠状动脉的成像质量,与冠状动脉造影进行对比,得出宝石能谱CT用于冠状动脉介入治疗术后支架内成像质量评估的价值。结果:宝石能谱CT显示支架内再狭窄的敏感度为100%,特异度为98.6%,阴性预测值为100%。直径≥3 mm的支架内成像质量优于直径3 mm的支架。但支架直径和厚度对宝石能谱CT支架内成像质量的可评估率没有差异。结论:宝石能谱CT均能提供优秀的冠状动脉支架内成像质量,采用宝石能谱CT替代冠状动脉造影术可对冠脉支架术后支架内影像进行评估。