防尘螨药物的实验室药效测试方法

建立防螨药物的药效测试装置与操作方法很有必要。由于尘螨形体微小 ,给防螨药效测试的操作带来诸多困难 ,作者利用螨虫的生物习性及特点 ,建立了布块集螨法、成螨自动分离与净化法、标定计数法 ,布块浸水计数法以及螨虫的驱避和杀灭效果的测试装置与测试方法。结果表明 ,采用成螨自动分离与净化法获得的成螨比例为 ( 94 0± 1 7) %;采用标定计数的精度 (成螨数 刻度 )为 ( 2 0 4± 6 6)只。标定计数 1 0 0 0只螨的实际回收率平均为 ( 75 9± 1 4 6) %,与手工计数无显著性差别 (P >0 0 5 )。实践表明 ,此技术与方法操作简便 ,结果可靠 ,使测试的速度及效果有明显提高     

林窗几何特征的测定方法

林窗面积、形状及边界木高是决定林窗环境异质性的3个林窗几何特征,影响林窗内植物更新。林窗几何特征的快速测量方法是林窗研究的基础,测量方法可分为2类:基于地面实际测量的地面法和基于林窗林冠照片的相片法。地面法费时费力,受人为因素影响大,可测量林冠林窗和扩展林窗的面积,但不能测量林窗形状和边界木高。相片法具有简单、客观、可重复的优点,但仅适用于林冠林窗。相片法共有5种:"平面相片法"、"航片法"、"半球面影像法"、"双半球面影像法"和"改进的半球面影像法"。前3种测量方法只能测量林冠林窗面积;"改进的半球面影像法"可测量林冠林窗面积和形状,且精度高于前3种相片法,但所需参数最多;"双半球面影像法"可测量林窗面积、形状及边界木高这3个林窗几何特征,且精度较高,但拍摄要求较高。     

酵母样真菌快速分型诊断

为进一步解决感染酵母样真菌病患者的早期诊断和治疗,我们采用了一种快速、简便、准确鉴定和分类酵母样真菌的方法——纸片法,同时对纸片法与传统的方法(生长图谱法)进行了比较。217株酵母样真菌的鉴定结果准确率达100％,其中白念珠菌检出率最高155株占71.42％,为最常见菌,其次是热带念珠20株占9.22％,其它四种念珠菌16株占7.37％,还有分类及种未定酵母菌26株占11.98％。以上观察结果其检出率和国内外报道的资料相似。我们认为用纸片法鉴定酵母样真菌,操作过程简单易行、费用低廉、准确快速,可尽早为临床提供治疗依据。     

谷氨酰胺高效酶法转化条件研究

谷氨酰胺合成酶是生物体氮代谢的中心酶之一,在消耗ATP的情况下,谷氨酰胺合成酶催化由谷氨酸和NH4+向谷氨酰胺的转化,Toch ikura提出了将酵母发酵与纯化酶结合生产谷氨酰胺(G ln)的方法,本实验通过建立酶法合成L-G ln与酵母酒精发酵的能量偶联体系,研究了在此偶联体系中各因素对谷氨酰胺酶转化效率的影响,为工业上利用酶法生产G ln提供理论依据。     

铁皮石斛花总RNA提取方法的比较研究

为筛选铁皮石斛(Dendrobiumofficinale)花总RNA提取方法,对8种提取方法进行了比较研究,包括改良CTAB-LiCl法(M1)、改良CTAB-异丙醇法(M2)、改良SDS-LiCl法(M3)、改良SDS-异丙醇法(M4)、多糖多酚植物RNA提取试剂盒法(M5)、柱式植物RNAout 2.0试剂盒法(M6)、RNAprep Pure多糖多酚植物总RNA提取试剂盒法(M7)和Biospin多糖多酚植物总RNA提取试剂盒法(M8)。结果表明,以M4和M5提取的总RNA带型清晰,完整性好,A260 nm/A280 nm为1.8～2.0,A260 nm/A230 nm大于2.0,RNA产率分别为(159.45±1.45)和(170.84±3.53)μg/g。利用M4、M5提取霍山石斛、金钗石斛、鼓槌石斛和美花石斛花的总RNA,样品的完整性、浓度和纯度均符合质量要求。以M4、M5提取的铁皮石斛总RNA为模板,扩增Actin基因片段,扩增产物大小与预期一致且条带单一。这说明M4、M5方法操作简便,结果重复性好,能够较好地提取石斛属植物花的总RNA。     

向日葵茎芯多糖的提取工艺优化及其体外抗肿瘤活性研究

研究了向日葵茎芯中主要活性物质多糖的提取工艺,并对此工艺进行了优化,选取的提取方法为水提醇沉法,以多糖含量作为指标,采用单因素试验研究了提取次数、原料颗粒的大小（目数）、料液比、提取时间、提取温度对向日葵茎芯多糖含量的影响。用苯酚-硫酸法测定提取液中多糖的含量,得出向日葵茎芯中多糖的最佳提取工艺条件为：提取次数2次,原料颗粒的大小（目数）60~80目,料液比（g·mL^-1）1：50,提取时间3.0 h,提取温度90℃,在最优提取条件下,多糖的提取得率为6.56%,多糖的含量为266.03 mg·g^-1。本文也对多糖的体外抗肿瘤活性进行了研究,结果表明向日葵茎芯多糖的体外抗肿瘤活性较弱。这些条件的确定为向日葵茎芯的深入研究奠定了基础。     

新农合支付方式改革对患者住院均次费用的影响研究

目的 通过多种形式的新农合支付方式改革,提高参保人群的受益程度,有效控制患者住院均次费用的不合理增长,促进医疗机构内部运行机制的转变,提高医保资金的使用效率。方法 采集不同类别的医疗机构,不同支付方式的住院均次费用的增幅数据,进行改革前后的数据分析。结果 改革前后各级各类医院住院均次费用的逐年增幅差距很大,利用支付方式综合改革后的各级各类医疗机构患者住院均次费用得到控制。结论 多种形式的支付方式改革是影响医疗机构内部运行机制、降低住院均次费用增幅的有效手段。     

Tissue Aspiration and Inverse Finite Element Characterisation of Soft Tissues

In this work we examined the determination of soft tissue parameters via tissue aspiration experiments and inverse finite element characterisation. An aspiration tube was put against the target tissue. The deformation of the tissue inside the tube caused by weak suction was tracked with a video based system. A strain energy function was employed to model the elastic behaviour of soft tissue and viscoelasticity was accounted for by means of a quasi-linear viscoelastic formulation. Friction between the aspiration tube and the aspirated tissue was included in the model. Based on the assumed material model, an optimal set of material parameters was found, in order to best fit the experimental data obtained from ex-vivo experiments on pig kidney cortex. The inverse method resulted in robust determination of the unknown material parameters.     

Bone remodelling around the tibia due to total ankle replacement: effects of implant material and implant–bone interfacial conditions

Abstract

One of the major causes of implant loosening is due to excessive bone resorption surrounding the implant due to bone remodelling. The objective of the study is to investigate the effects of implant material and implant–bone interface conditions on bone remodelling around tibia bone due to total ankle replacement. Finite element models of intact and implanted ankles were developed using CT scan data sets. Bone remodelling algorithm was used in combination with FE analysis to predict the bone density changes around the ankle joint. Dorsiflexion, neutral, and plantar flexion positions were considered, along with muscle force and ligaments. Implant–bone interfacial conditions were assumed as debonded and bonded to represent non-osseointegration and fully osseointegration at the porous coated surface of the implant. To investigate the effect of implant material, three finite element models having different material combinations of the implant were developed. For model 1, tibial and talar components were made of Co–Cr–Mo, and meniscal bearing was made of UHMWPE. For model 2, tibial and talar components were made of ceramic and meniscal bearing was made of UHMWPE. For model 3, tibial and talar components were made of ceramic and meniscal bearing was made of CFR-PEEK. Changes in implant material showed no significant changes in bone density due to bone remodelling. Therefore, ceramic appears to be a viable alternative to metal and CFR-PEEK can be used in place of UHMWPE. This study also indicates that proper bonding between implant and bone is essential for long-term survival of the prosthetic components.     

遗传标记和免疫学方法在实验动物质量控制中的应用

生命科学发展迅速,实验动物级别逐渐提高,在保证生物制品实验结果可靠性前提下,完善动物由低级别向高级别过渡显得十分必要,最终目的达到实验动物标准化和动物实验规范化。对实验动物质量控制中的遗传标记和免疫学方法进行了综述。