Computational evaluation of load carriage effects on gait balance stability

Evaluating the effects of load carriage on gait balance stability is important in various applications. However, their quantification has not been rigorously addressed in the current literature, partially due to the lack of relevant computational indices. The novel Dynamic Gait Measure (DGM) characterizes gait balance stability by quantifying the relative effects of inertia in terms of zero-moment point, ground projection of center of mass, and time-varying foot support region. In this study, the DGM is formulated in terms of the gait parameters that explicitly reflect the gait strategy of a given walking pattern and is used for computational evaluation of the distinct balance stability of loaded walking. The observed gait adaptations caused by load carriage (decreased single support duration, inertia effects, and step length) result in decreased DGM values (p < 0.0001), which indicate that loaded walking motions are more statically stable compared with the unloaded normal walking. Comparison of the DGM with other common gait stability indices (the maximum Floquet multiplier and the margin of stability) validates the unique characterization capability of the DGM, which is consistently informative of the presence of the added load.     

Hip joint moments in symptomatic vs. asymptomatic people with mild radiographic hip osteoarthritis

Our primary objective was to examine external hip joint moments during walking in people with mild radiographic hip osteoarthritis (OA) with and without symptoms and disease-free controls. Three groups were compared (symptomatic with mild radiographic hip OA, n = 12; asymptomatic with mild radiographic hip OA, n = 13; OA-free controls, n = 20). Measures of the external moment (peak and impulse) in the sagittal, frontal and transverse plane during walking were determined. Variables were compared according to group allocation using mixed linear regression models that included individual gait trials, with group allocation as fixed effect and walking speed as a random effect. Participants with evidence of radiographic disease irrespective of symptoms walked 14–16% slower compared to disease-free controls (p = 0.002). Radiographic disease without symptoms was not associated with any altered measures of hip joint moment compared to asymptomatic OA-free controls once speed was taken into account (p ≥ 0.099). People with both mild radiographic disease and symptoms had lower external peak hip adduction moment (p = 0.005) and lower external peak internal rotation moment (p < 0.001) accounting for walking speed. Among angular impulses, only the presence of symptoms was associated with a reduced hip internal rotation impulse (p = 0.002) in the symptomatic group. Collectively, our observations suggest that symptoms have additional mechanical associations from radiographic disease alone, and provide insight into potential early markers of hip OA. Future research is required to understand the implications of modifying walking speed and/or the external hip adduction and internal rotation moment in people with mild hip OA.     

An approach to quality management in structural biology: biophysical selection of proteins for successful crystallization

Aggregation, incorrect folding and low stability are common obstacles for protein structure determination, and are often discovered at a very late state of protein production. In many cases, however, the reasons for failure to obtain diffracting crystals remain entirely unknown. We report on the contribution of systematic biophysical characterization to the success in structural determination of human proteins of unknown fold. Routine analysis using dynamic light scattering (DLS), differential scanning calorimetry (DSC) and Fourier-transform infrared spectroscopy (FTIR) was employed to evaluate fold and stability of 263 purified protein samples (98 different human proteins). We found that FTIR-monitored temperature scanning may be used to detect incorrect folding and discovered a positive correlation between unfolding enthalpy measured with DSC and the size of small, globular proteins that may be used to estimate the quality of protein preparations. Furthermore, our work establishes that the risk of aggregation during concentration of proteins may be reduced through DLS monitoring. In summary, our study demonstrates that biophysical characterization provides an ideal tool to facilitate quality management for structural biology and many other areas of biological research.     

祛瘀散烫疗对髋部骨折术后下肢深静脉血栓预防效果观察

目的观察中药制剂祛瘀散烫熨术对髋部骨折术后下肢深静脉血栓(DVT)的预防价值。方法选取髋部骨折术后患者100例,随机分为对照组和观察组各50例。对照组患者术后按常规方法护理,观察组患者术后在常规护理基础上于术后24h拔除引流管后加用中药祛瘀散对术肢进行烫熨,观察比较两组患者术前、术后组内及组间血浆D-二聚体指标变化情况。结果两组患者术前血浆D-二聚体比较,差异无统计学意义(P0.05);术后两组患者血浆D-二聚体比较,观察组明显低于对照组(P0.05)。结论中药制剂祛瘀散烫熨术对髋部骨折术后下肢DVT形成有预防作用,可降低术后下肢深静脉血栓形成的风险,减少髋部骨折术后并发症的发生。     

A biomechanical comparison of composite femurs and cadaver femurs used in experiments on operated hip fractures

Fourth generation composite femurs (4GCFs, models #3406 and #3403) simulate femurs of males <80 years with good bone quality. Since most hip fractures occur in old women with fragile bones, concern is raised regarding the use of standard 4GCFs in biomechanical experiments. In this study the stability of hip fracture fixations in 4GCFs was compared to human cadaver femurs (HCFs) selected to represent patients with hip fractures.Ten 4GCFs (Sawbones, Pacific Research Laboratories, Inc., Vashon, WA, USA) were compared to 24 HCFs from seven females and five males >60 years. Proximal femur anthropometric measurements were noted. Strain gauge rosettes were attached and femurs were mounted in a hip simulator applying a combined subject-specific axial load and torque. Baseline measurements of resistance to deformation were recorded. Standardized femoral neck fractures were surgically stabilized before the constructs were subjected to 20,000 load-cycles. An optical motion tracking system measured relative movements.Median (95% CI) head fragment migration was 0.8 mm (0.4 to 1.1) in the 4GCF group versus 2.2 mm (1.5 to 4.6) in the cadaver group (p=0.001). This difference in fracture stability could not be explained by observed differences in femoral anthropometry or potential overloading of 4GCFs. 4GCFs failed with fracture-patterns different from those observed in cadavers.To conclude, standard 4GCFs provide unrealistically stable bone-implant constructs and fail with fractures not observed in cadavers. Until a validated osteopenic or osteoporotic composite femur model is provided, standard 4GCFs should only be used when representing the biomechanical properties of young healthy femurs.     

Validation of magneto-inertial measuring units for measuring hip joint angles

Camera-based motion capture systems are the current gold standard for motion analysis. However, the use of wireless inertial sensor-based systems is increasing in popularity, largely due to convenient portability. The purpose of this study was to validate the use of wireless inertial sensors for measuring hip joint motion with a functional calibration requiring only one motion (walking) and neutral standing. Data were concurrently collected using a 10-camera motion capture system and a wireless inertial sensor-based system. Hip joint angles were measured for 10 participants during walking, jumping jack, and bilateral squat tasks and for a subset (n = 5) a jump turn task. Camera-based system hip joint angles were calculated from retro-reflective marker positions and sensor-based system angles were calculated in MATLAB using the sensor output quaternions. Most hip joint angles measured with the sensor-based system were within 6° of angles measured with the camera motion capture system. Accurate measurement of motion outside of a laboratory setting has broad implications for diagnosing movement abnormalities, monitoring sports performance, and assessing rehabilitation progress.     

Lipase-catalyzed asymmetric synthesis of naphtho[2,3-c]furan-1(3H)-one derivatives by a one-pot dynamic kinetic resolution/intramolecular Diels–Alder reaction: Total synthesis of (−)-himbacine

One-pot sequential reactions using the acyl moieties installed by enzymatic dynamic kinetic resolution of alcohols have been little investigated. In this work, the acryloyl moiety installed via the lipase/oxovanadium combo-catalyzed dynamic kinetic resolution of a racemic dienol [4-(cyclohex-1-en-1-yl)but-3-en-2-ol or 1-(cyclohex-1-en-1-yl)but-2-en-1-ol] with a (Z)-3-(phenylsulfonyl)acrylate underwent an intramolecular Diels–Alder reaction in a one-pot procedure to produce an optically active naphtho[2,3-c]furan-1(3H)-one derivative (98% ee). This method was successfully applied to the asymmetric total synthesis of (?)-himbacine.     

Motor unit activation patterns during concentric wrist flexion in humans with different muscle fibre composition

Muscle activity was recorded from the flexor carpi radialis muscle during static and dynamic-concentric wrist flexion in six subjects, who had exhibited large differences in histochemically identified muscle fibre composition. Motor unit recruitment patterns were identified by sampling 310 motor units and counting firing rates in pulses per second (pps). During concentric wrist flexion at 30% of maximal exercise intensity the mean firing rate was 27 (SD 13) pps. This was around twice the value of 12 (SD 5) pps recorded during sustained static contraction at 30% of maximal voluntary contraction, despite a larger absolute force level during the static contraction. A similar pattern of higher firing rates during dynamic exercise was seen when concentric wrist flexion at 60% of maximal exercise intensity [30 (SD 14) pps] was compared with sustained static contraction at 60% of maximal voluntary contraction [19 (SD 8) pps]. The increase in dynamic exercise intensity was accomplished by recruitment of additional motor units rather than by increasing the firing rate as during static contractions. No difference in mean firing rates was found among subjects with different muscle fibre composition, who had previously exhibited marked differences in metabolic response during corresponding dynamic contractions. It was concluded that during submaximal dynamic contractions motor unit firing rate cannot be deduced from observations during static contractions and that muscle fibre composition may play a minor role. Accepted: 5 May 1998     

Superimposing hip extension on knee flexion evokes higher activation in biceps femoris than knee flexion alone

Hamstring muscle function during knee flexion has been linked to hamstring injury and performance. However, it is unclear whether knee flexion alone (KF) requires similar hamstring electromyography (EMG) activity pattern to simultaneous hip extension and knee flexion (HE-KF), a combination that occurs in the late swing phase of sprinting. This study examined whether HE-KF maximal voluntary isometric contraction (MVIC) evokes higher (EMG) activity in biceps femoris long head (BFlh) and semitendinosus (ST) than KF alone. Effects of shank rotation angles were also tested. Twenty-one males performed the above-mentioned MVICs while EMG activity was measured along ST and BFlh. Conditions were compared using a one-way mixed functional ANOVA model under a fully Bayesian framework. Higher EMG activity was found in HE-KF in all shank rotation positions than in KF in the middle region of BFlh (highest in the 9th channel, by 0.022 mV [95%CrI 0.014 to 0.030] in neutral shank position). For ST, this was only observed in the neutral shank position and in the most proximal channel (by 0.013 mV [95%CrI 0.001 to 0.025]). We observed muscle- and region-specific responses to HE-KF. Future studies should examine whether hamstring activation in this task is related to injury risk and sprint performance.