More lingual surface attrition of the maxillary anterior teeth in American Indians: prehistoric Panamanians

Lingual surface attrition of the maxillary anterior teeth (LSA-MAT) has been found in additional prehistoric Latin American Indian skeletons. LSAMAT was first observed in crania from an Archaic Brazilian site. This second finding occurs in teeth from Venado Beach, a late prehistoric site in Panama. LSAMAT is also present in some fragmentary specimens from the Archaic Cerro Mangote site in Panama. LSAMAT at Venado Beach is present in 57% of 28 adult crania. As in the Brazilian study, LSAMAT is associated with a high caries rate (82% of 50 adults; 11.7% of 852 permanent teeth). As first suggested, eating and processing of some type of abrasive carbohydrate food, such as manioc, is the possible cause of LSAMAT. However, other possible causes relating to habitation on or near marine coasts cannot be totally ruled out.     

A feasibility study of an in vitro differentiation potential toward insulin-producing cells by dental tissue-derived mesenchymal stem cells

Dental tissue-derived mesenchymal stem cells have been proposed as an alternative source for mesenchymal stem cells. Here, we investigated the differentiation ability toward insulin producing cells (IPCs) of human dental pulp stem cells (hDPSCs) and human periodontal ligament stem cells (hPDLSCs). These cells expressed mesenchymal stem cell surface markers and were able to differentiate toward osteogenic and adipogenic lineages. Upon 3 step-IPCs induction, hDPSCs exhibited more colony number than hPDLSCs. The mRNA upregulation of pancreatic endoderm/islet markers was noted. However, the significant increase was noted only for PDX-1, NGN-3, and INSULIN mRNA expression of hDPSCs. The hDPSCs-derived IPCs expressed PRO-INSULIN and released C-PEPTIDE upon glucose stimulation in dose-dependent manner. After IPCs induction, the Notch target, HES-1 and HEY-1, mRNA expression was markedly noted. Notch inhibition during the last induction step or throughout the protocol disturbed the ability of C-PEPTIDE release upon glucose stimulation. The results suggested that hDPSCs had better differentiation potential toward IPCs than hPDLSCs. In addition, the Notch signalling might involve in the differentiation regulation of hDPSCs into IPCs.     

Accuracy in Dental Medicine,A New Way to Measure Trueness and Precision

Reference scanners are used in dental medicine to verify a lot of procedures. The main interest is to verify impression methods as they serve as a base for dental restorations. The current limitation of many reference scanners is the lack of accuracy scanning large objects like full dental arches, or the limited possibility to assess detailed tooth surfaces. A new reference scanner, based on focus variation scanning technique, was evaluated with regards to highest local and general accuracy. A specific scanning protocol was tested to scan original tooth surface from dental impressions. Also, different model materials were verified. The results showed a high scanning accuracy of the reference scanner with a mean deviation of 5.3 ± 1.1 µm for trueness and 1.6 ± 0.6 µm for precision in case of full arch scans. Current dental impression methods showed much higher deviations (trueness: 20.4 ± 2.2 µm, precision: 12.5 ± 2.5 µm) than the internal scanning accuracy of the reference scanner. Smaller objects like single tooth surface can be scanned with an even higher accuracy, enabling the system to assess erosive and abrasive tooth surface loss. The reference scanner can be used to measure differences for a lot of dental research fields. The different magnification levels combined with a high local and general accuracy can be used to assess changes of single teeth or restorations up to full arch changes.     

口腔种植材料表面特性与生物膜形成研究进展

人类口腔环境为微生物提供了适宜生存的条件,多种微生物在牙齿表面形成了由基质包裹相互粘附的口腔生物膜,口腔生物膜是口腔微生物生存、代谢和致病的基础。随着1965年Brnemark种植体在临床上的成功应用,种植相关材料周围致病菌导致的种植体周围炎成为种植修复最常见的并发症之一,影响种植修复的远期效果。种植体周围炎引起了许多关注,并且口腔种植材料表面的特性和口腔生物膜的形成密切相关。本文就种植材料及天然牙齿表面的生物膜形成、种植材料表面特性对口腔生物膜及细菌粘附的影响因素、增强种植材料抗菌性能的方法以及未来的研究方向等作一综述。     

Attachment of a pseudomonas sp. to Fe(III)‐(hydr)oxide surfaces

As a first step towards understanding microbial dissolution processes, our research focuses on characterizing attachment features that form between a Pseudomonas sp. bacteria and the Fe(III)‐(hydr)oxide minerals hematite and goethite. Microbial growth curves in Fe‐limited growth media indicated that the bacteria were able to obtain Fe from the Fe(III)‐(hydr)oxidesfor use in metabolic processes. A combination of scanning electron microscopy, epifluorescence, and Tapping Mode? atomic‐force microscopy showed that the bacteria colonized some fraction of mineralogical aggregates. These aggregates were covered by bacteria and were linked together by relatively open biofilms consisting of networks of fiber‐like attachment features intertwined through thin films of amorphous‐looking organic material. The biofilm material encompassed numerous individual bacteria, as well as minéralogie particles. We hypothesize that the bacteria first attached to mineral aggregates, perhaps via their flagella, forming colonies. Following initial attachment, the bacteria exuded additional attachment features in the form of fine, branching fibrils intertwined through thin films. The detailed structures of these attachment features were highlighted by Phase Imaging atomic‐force microscopy, which served as a real‐time contrast enhancement technique and showed some poorly defined sensitivity to different surface materials, most probably related to differences in stiffness or viscoelasticity. Although the mechanism of the microbially enhanced dissolution remains unknown, we hypothesize that the bacteria may have produced micro environments conducive to dissolution through the use of observed extracellular materials.     

Osteology of a slave burial population from Barbados,West Indies

A unique seventeenth–nineteenth century slave cemetery population from Newton plantation, Barbados, allows examination of craniodental characters in relation to ethnohistorical data. Age-at-death estimates suggest life expectancy at birth of 29 years and low infant mortality; historical demography, however, suggests life expectancy of 20 years and very high infant mortality. Tooth decay, bilateral tooth loss, periodontal disease, root hypercementosis, and severe enamel hypoplasia are high in frequency. The teeth yield evidence of such cultural practices as pipe-smoking and incisor mutilation. Several skeletal features reflect periodic near-starvation. Directional and fluctuating dental asymmetry, relative tooth size, and hypoplasia distribution suggest slaves experienced considerable weaning trauma; metabolic stress at this time exceeded that of prenatal and immediate postnatal periods. Odontometrics and dental and cranial nonmetric traits indicate that modern Blacks are intermediate between the ancestral slaves and modern Whites but more similar to the latter, suggesting effects of environmental covariance exceed those of genetic admixture. Nonmetric trait distributions show nonrandom patterns according to area of burial in the cemetery, a possible result of family segregation.     

Principal axis analysis of dental attrition data from two Australian Aboriginal populations

Dental attrition scores from two distinct Australian Aboriginal populations were compared by principal axis analysis. The first group was composed of members of the Narrinyeri group who occupied the river basin and mouth of the River Murray. The second group consisted of members of the Kaurna tribe who occupied the coastal plain to the west of the Narrinyeri. The groups were isolated both physically and culturally and as a result differences in patterns of tooth wear might be expected. In the Narrinyeri sample, attrition tended to be more rapid in females for all but the anterior teeth. The only sex difference in the Kaurna was for the maxillary central incisors, which wore more rapidly in females. Interpopulation differences in the pattern of tooth wear were also evident. The incisors, canines, and premolars of Kaurna subjects tended to wear more rapidly, while the rate of posterior tooth wear tended to be greater in the Narrinyeri. The application of the principal axis method to quantitative attrition data provided a sensitive, objective evaluation of tooth wear. The reasons for the observed differences between the two groups are still not completely clear but may relect both functional and morphological differences between groups.     

A genetic model of dental reduction through the probable mutation effect

A simulation approach is used in order to elucidate the nature of the hypothesized “probable mutation effect” as it applies to dental reduction in man. Computer-generated simulations of the accumulation of mutations in a human gene pool show the results of the proposed model under the influence of various parameters, as well as illustrating the nature of such genetic change through time. This approach supports a polygenic model of the probable mutation effect as a viable hypothesis for an explanation of the dental reduction which has occurred in some human populations over the last 40,000 years.     

Interactions of microorganisms within a urinary catheter polymicrobial biofilm model

Biofilms are often polymicrobial in nature, which can impact their behavior and overall structure, often resulting in an increase in biomass and enhanced antimicrobial resistance. Using plate counts and locked nucleic acid/2′-O-methyl-RNA fluorescence in situ hybridization (LNA/2′OMe-FISH), we studied the interactions of four species commonly associated with catheter-associated urinary tract infections (CAUTI): Enterococcus faecalis, Escherichia coli, Candida albicans, and Proteus mirabilis. Eleven combinations of biofilms were grown on silicone coupons placed in 24-well plates for 24 h, 37°C, in artificial urine medium (AUM). Results showed that P. mirabilis was the dominant species and was able to inhibit both E. coli and C. albicans growth. In the absence of P. mirabilis, an antagonistic relationship between E. coli and C. albicans was observed, with the former being dominant. E. faecalis growth was not affected in any combination, showing a more mutualistic relationship with the other species. Imaging results correlated with the plate count data and provided visual verification of species undetected using the viable plate count. Moreover, the three bacterial species showed overall good repeatability SD (S_r) values (0.1–0.54) in all combinations tested, whereas C. albicans had higher repeatability S_r values (0.36–1.18). The study showed the complexity of early-stage interactions in polymicrobial biofilms. These interactions could serve as a starting point when considering targets for preventing or treating CAUTI biofilms containing these species.     

Activities of a broad-spectrum antimicrobial peptide analogue SAMP-A4-C8 and its combat against pneumonia in Staphylococcus aureus-infected mice

Antimicrobial peptides and their analogues have become substitutes for antibiotics in recent years. The antimicrobial peptide analogue SAMP-A4-C8 (n-octanoic-VRLLRRRI) with high antimicrobial activity was found in our lab. We speculate that it may kill pathogens by some lethal mechanism of action. In the present investigation, the microbicidal activities of SAMP-A4-C8 and its mechanism of action were investigated. The results demonstrated that SAMP-A4-C8 had lethal activities against Staphylococcus aureus and Candida albicans by cell disruption. Based on its microbicidal activities, we believe that it is worth further research for its potential as drug candidate. The results showed that SAMP-A4-C8, with low propensity to induce the resistance of S. aureus and C. albicans, could kill the persister cells of S. aureus and C. albicans, exhibited biofilm forming inhibition activity and preformed biofilm eradication ability against S. aureus and C. albicans, and displayed therapeutic potential on pneumonia in S. aureus-infected mice by reducing lung inflammation. The present study provided a promising drug candidate in the war against multidrug resistance.