Comparison of the efficiency of urea,aqueous ammonia and ammonium sulphate as nitrogen fertilizers

Summary Nitrogen-15 labelled urea, aqueous NH₃ and (NH₄)₂SO₄ were applied to soils contained in pots. The fertilizers were injected in 5 cm³ of solution, 3.5 cm below the soil surface, to simulate a fertilizer band in the field. Ryegrass (Lolium perenne) was planted, and several cuttings and roots were harvested. Efficiency was determined as the recovery of fertilizer-N in the plant tissues and soil.Total recovery varied from 94 to 100%. There was no significant difference between the total recovery of the 3 fertilizer forms, although recovery in the soil component was lower for (NH₄)₂SO₄ than for urea or NH₃. There was a significant difference in total recovery between soils due to the soil component. Only small amounts of¹⁵N were not recovered, whereas laboratory experiments reported elsewhere had demonstrated that substantial gaseous losses of N as N₂, N₂O and NO +NO₂ occurred in these soils during nitrification of added NH₃ fertilizer.     

Energy requirements for growth and maintenance of Scenedesmus protuberans Fritsch in light-limited continuous cultures

Scenedesmus protuberans Fritsch was grown in light-limited continuous cultures with a light-dark cycle, at temperatures of 20° and 28° C. At 20° irradiances of 12 and 38 W m^–2 were used, at 28° 38 W m^–2.The relationships between growth rate and light uptake rate were of diphasic linear character. With the lower growth rates the relationships were defined with the parameters _e , i.e. the specific maintenance rate constant, and c, the true efficiency of light energy conversion into biomass. The _e -value was dependent on temperature, the c on irradiance.In cultures, incubated in prolonged darkness, decrease rates of biomass were comparable to the derived _e -values.Both diphasic linear relationships between growth rate and light uptake rate and the same order of magnitude of _e -values could be derived from literature data on other green algae.     

Some features of feeding,respiration and energy conversion of Dapnia Magna

Some results of studies with Daphnia magna are presented. These results can be used as background information for toxicologists, but the techniques referred to might well be used for toxicity tests. Daphnia magna is a filter-feeder. With the Coulter Counter it was shown that the feeding mechanism is aselective for size of the food particles. It was also shown that algal cells can pass the gut of Daphnia magna several times before being completely digested. The uptake of food is proportional to the food concentration up to a critical concentration. Above this concentration the food uptake is constant. Respiration is also dependent on the food concentration, and has a maximum value at food concentrations near the critical concentration of the feeding process. Growth efficiency is independent of the food concentration. The effect of temperature on the feeding process is different for low and high food concentrations. Growth efficiency is maximal at 10°C and above 22°C growth efficiency was negative, which means that the population cannot survive under the experimental conditions used, at temperatures above 22°C.     

Effects of variations in soil water potential,depth of N placement,and cultivar on postanthesis N uptake by wheat

This study was conducted to investigate the influence of soil water potential, depth of N placement, timing, and cultivar on uptake of a small dose of labeled N applied after anthesis by wheat (Triticum aestivum L.) Understanding postanthesis N accumulation should allow better control of grain protein concentration through proper manipulation of inputs. Two hard, red spring-wheat cultivars were planted in early and late fall each yr of a 2-yr field experiment. Less than 1 kg N ha^–1 as K ¹⁵NO₃ was injected into the soil at two depths: shallow (0.05 to 0.08 m) and deep (0.15 to 0.18 m). In both years an irrigation was applied at anthesis, and injections of labeled N were timed 4, 12, and 20 days after anthesis (DAA). Soil water potential was estimated at the time of injection. Mean recovery of ¹⁵N in grain and straw was 57% of the ¹⁵N applied. Recovery did not differ between the high-protein (Yecora Rojo) and the low-protein (Anza or Yolo) cultivars. Mean recovery from deep placement was 60% versus only 54% from shallow placement (p < 0.01). Delaying the time of injection decreased mean recovery significantly from 58% at 4 DAA to 54% at 20 DAA. This decrease was most pronounced in the shallow placement, where soil drying was most severe. Regressions of recovery on soil water potential of individual cultivar x yr x planting x depth treatments were significant only under the driest conditions. Stepwise regression of ¹⁵N recovery on soil water potential and yield parameters using data from all treatments of both years resulted in an equation including soil water potential and N yield, with a multiple correlation coefficient of 0.64. The translocation of ¹⁵N to grain was higher (0.89) than the nitrogen harvest index (0.69), and showed a highly significant increase with increase in DAA. This experiment indicates that the N uptake capacity of wheat remains reasonably constant between 4 and 20 DAA unless soil drying is severe.     

User−Producer Interaction in Housing Energy Innovations

Von Hippel and colleagues have highlighted the crucial role of users in innovation in different industries and types of products. They describe the innovation process in terms of the distinct domains of knowledge that producers and users possess. Producers have knowledge about technical solutions and users about their needs, the context of use, and their own capabilities as users. Both sets of knowledge are characterized by "stickiness": They move relatively freely within their own domain but are difficult to transfer outside of it.
In the case of radical innovations for sustainable consumption, the problem of "sticky information" is compounded. Both producers and consumers need to reach out of their conventional competencies and search for new solutions. "Societal actors," such as government bodies or environmental experts, can show the way to such solutions, but this new knowledge needs to be integrated with the "sticky" knowledge about everyday practices in production and consumption.
In the present article we attempt to conceptualize the role and interaction of user and producer knowledge with the knowledge of environmental experts in housing energy innovations. We do so by applying the user−producer interaction framework to a case study on the introduction of low-energy housing concepts in Finland. On the basis of this analysis, we draw conclusions on the potential and limitations of today's practices in the field. For example, we suggest that user involvement can help to enhance the acceptance of low-energy solutions but that the methods for involving users need to be adapted to the particular circumstances in each industry.     

Biology and comparative predation efficacy of three heteropteran species recorded as predators ofBemisia tabaci in Maharashtra

Two mirids,Deraeocoris sp. andCampylomma nicolasi Reuter and one lygaeid,Geocoris ochropterus Fieber were found preying onB. tabaci (Gennadius) for the first time in Maharashtra State of India during 1987–88. Their biology and predation capacity onB. tabaci were studied in detail under laboratory conditions. The nymphal stage ofDeraeocoris sp. passed through 6 instars, whereas 5 instars in case of the remaining species.G. ochropterus, Deraeocoris sp. andC. nicolasi consumed on an average 482.5, 275.3 and 128.8 nymphs of 57.3, 25.5 and 20.6 days, respectively. On the basis of consumption rate per day,Deraeocoris sp. proved to be a superior predator. Part of Ph. D. Thesis submitted to Marathwada Agricultural University, Parbhani 431402, India.     

On the Information Matrix of Exponential Mixture Models with Long-term Survivors

The aim of this paper is to study the properties of the asymptotic variances of the maximum likelihood estimators of the parameters of the exponential mixture model with long-term survivors for randomly censored data. In addition, we study the asymptotic relative efficiency of these estimators versus those which would be obtained with complete follow-up. It is shown that fixed censoring at time T produces higher precision as well as higher asymptotic relative efficiency than those obtainable under uniform and uniform-exponential censoring distributions over (0, T). The results are useful in planning the size and duration of survival experiments with long-term survivors under random censoring schemes.     

Preparation of a Water-in-oil-in-water (W/O/W) Type Microcapsules by a Single-droplet-drying Method and Change in Encapsulation Efficiency of a Hydrophilic Substance during Storage

Microcapsules of a water-in-oil-in-water (W/O/W) emulsion, which contained a hydrophilic substance, 1,3,6,8-pyrenetetrasulfonic acid tetrasodium salt (PTSA), in its inner aqueous phase, was prepared by hot-air-drying or freeze-drying the emulsion using a single-droplet-drying method. Pullulan, maltodextrin, or gum arabic was used as a wall material, and the oily phase was tricaprylin, oleic acid, olive oil, or a mixture of tricaprylin and olive oil. An encapsulation efficiency higher than 0.95 was reached except for the microcapsules prepared using gum arabic and oleic acid. The hot-air-dried microcapsules were generally more stable than the freeze-dried microcapsules at 37°C and various relative humidities. The stability was higher for the microcapsules with tricaprylin as the oily phase than for the microcapsules with oleic acid. The higher stability of the microcapsules with tricaprylin would be ascribed to the lower partition coefficient of PTSA to the oily phase. There was a tendency for the stability to be higher at lower relative humidity for both the hot-air- and freeze-dried microcapsules. The volumetric fraction of olive oil in its mixture with tricaprylin did not significantly affect either the encapsulation efficiency or the stability of the hot-air-dried microcapsules.     

Efficient Organic Solar Cell with 16.88% Efficiency Enabled by Refined Acceptor Crystallization and Morphology with Improved Charge Transfer and Transport Properties

Single‐layered organic solar cells (OSCs) using nonfullerene acceptors have reached 16% efficiency. Such a breakthrough has inspired new sparks for the development of the next generation of OSC materials. In addition to the optimization of electronic structure, it is important to investigate the essential solid‐state structure that guides the high efficiency of bulk heterojunction blends, which provides insight in understanding how to pair an efficient donor–acceptor mixture and refine film morphology. In this study, a thorough analysis is executed to reveal morphology details, and the results demonstrate that Y6 can form a unique 2D packing with a polymer‐like conjugated backbone oriented normal to the substrate, controlled by the processing solvent and thermal annealing conditions. Such morphology provides improved carrier transport and ultrafast hole and electron transfer, leading to improved device performance, and the best optimized device shows a power conversion efficiency of 16.88% (16.4% certified). This work reveals the importance of film morphology and the mechanism by which it affects device performance. A full set of analytical methods and processing conditions are executed to achieve high efficiency solar cells from materials design to device optimization, which will be useful in future OSC technology development.     

Barrier Designs in Perovskite Solar Cells for Long‐Term Stability

Perovskite solar cells (PSCs) have attracted much attention in the past decade and their power conversion efficiency has been rapidly increasing to 25.2%, which is comparable with commercialized solar cells. Currently, the long‐term stability of PSCs remains as a major bottleneck impeding their future commercial applications. Beyond strengthening the perovskite layer itself and developing robust external device encapsulation/packaging technology, integration of effective barriers into PSCs has been recognized to be of equal importance to improve the whole device’s long‐term stability. These barriers can not only shield the critical perovskite layer and other functional layers from external detrimental factors such as heat, light, and H₂O/O₂, but also prevent the undesired ion/molecular diffusion/volatilization from perovskite. In addition, some delicate barrier designs can simultaneously improve the efficiency and stability. In this review article, the research progress on barrier designs in PSCs for improving their long‐term stability is reviewed in terms of the barrier functions, locations in PSCs, and material characteristics. Regarding specific barriers, their preparation methods, chemical/photoelectronic/mechanical properties, and their role in device stability, are further discussed. On the basis of these accumulative efforts, predictions for the further development of effective barriers in PSCs are provided at the end of this review.