Plant‐extract‐induced changes in the proteome of the soil‐borne pathogenic fungus Thielaviopsis basicola

Thielaviopsis basicola is a hemibiotroph fungus that causes black root rot disease in diverse plants with significant impact on cotton production in Australia. To elucidate how T. basicola growth and proteome are influenced by interactions with natural sources, this fungus was cultured in the presence of root extracts from non‐host (wheat, hairy vetch) and susceptible host (cotton, lupin) plants. We found that T. basicola growth was significantly favored in the presence of host extracts, while hierarchical clustering analysis of 2‐DE protein profiles of T. basicola showed plant species had a larger effect on the proteome than host/non‐host status. Analysis by LC‐MS/MS of unique and differentially expressed spots and identification using cross‐species similarity searching and de novo sequencing allowed successful identification of 41 spots. These proteins were principally involved in primary metabolism with smaller numbers implicated in other diverse functions. Identification of several “morpho” proteins suggested morphological differences that were further microscopically investigated. Identification of several highly expressed spots suggested that vitamin B₆ is important in the T. basicola response to components present in hairy vetch extract, and finally, three spots, induced in the presence of lupin extract, may correspond to malic enzyme and be involved in lipid accumulation.     

Merino ewes bred for parasite resistance reduce larval contamination onto pasture during the peri-parturient period

The peri-parturient period is crucial for controlling worms as the acquired immunity of ewes is disrupted, resulting in an increase in faecal worm egg counts. Two hypotheses were tested in this experiment - that ewes bred for worm resistance would have lower faecal worm egg counts than unselected control ewes, during late pregnancy and lactation, under similar but separate grazing areas; and also that numbers of infective nematode larvae would be lower on pastures grazed by resistant ewes than pastures grazed by unselected control ewes. Faecal samples were collected from resistant and unselected ewes in late pregnancy and early lactation, during the winter rainfall season, and analysed for numbers of Trichostrongylus colubriformis and Teladorsagia circumcincta. Pasture samples were taken 1 week before and 7 weeks after lambing started and analysed for infective larvae. In all sheep, worm egg counts rose 2 weeks prior to lambing and continued into lactation. Worm egg counts were significantly lower in the resistant ewes from 1 week before lambing to 2 weeks after lambing. There were no differences in egg counts between single- and twin-bearing ewes in the resistant line. However, twin-bearing control ewes had significantly higher egg counts than single-bearing control ewes. Following lactation, plots grazed by resistant ewes had substantially less contamination with T. colubriformis larvae, but there were no differences in numbers of T. circumcincta larvae. Our results demonstrate that sheep bred for worm resistance has lower worm burdens during the peri-parturient phase and that lambs born to resistant ewes face a lower larval challenge during their introduction to grazing. In our environment, selection for low worm egg counts has produced sheep highly resistant to T. colubriformis, but has had less impact on resistance towards T. circumcincta.     

Gradual evolutionary transformations of ontogeny in an Ordovician ostracod lineage

Carapace morphology was studied biometrically for each instar in a series of populations of Mojczella Olempska 1988 from the Ordovician strata exposed in Mójcza, Holy Cross Mountains, Poland. Phosphatic coatings of ostracod valves occur there in abundance from the top of the Arenig to the Late Caradoc. The lineage shows smooth acceleration in ontogenetic expression of the junction of crests C1 and C3, which originally were separated throughout the ontogeny, while in the latest populations the separation was preserved only in the earliest moult stage. Moreover, the velar structure, being originally developed as a wide, slightly convex, flange-like dolon in heteromorphs, became transformed into a convex dolon.     

Effects of Acacia (Acacia auriculaeformis A. Cunn)‐associated fungi on mustard (Brassica juncea (L.) Coss. var. foliosa Bailey) growth in Cd‐ and Ni‐contaminated soils

Aims: To evaluate the effect of Acacia auriculaeformis‐associated fungi on the growth of mustard [Brassica juncea (L.) Coss. var. foliosa Bailey] in Cd‐ and Ni‐contaminated soils and design novel plant–fungi associations for bioremediation purpose. Methods and Results: Endophytic Trichoderma H8 and rhizosphere Aspergillus G16 were applied for rhizoremediation of Cd‐, Ni‐, and Cd–Ni combination‐contaminated soils through association with B. juncea (L.) Coss. var. foliosa. Compared with the noninoculated control plants, inoculation with Trichoderma H8 produced 109%, 41% and 167% more fresh weight (FW) plant yields in the Cd‐, Ni‐, and Cd–Ni‐contaminated soils, respectively (P < 0·05). Similarly, plants inoculated with Aspergillus G16 produced 109%, 47% and 44% more FW plant yields in these contaminated soils, respectively. Plants co‐inoculated with these two strains produced 118%, 100% and 178% more FW plant yields, respectively. The inoculations also increased the translocation factors and metal bioconcentration factors. Conclusions: The efficiency of phytoextraction for B. juncea (L.) Coss. var. foliosa was enhanced after inoculating with Acacia‐associated fungi. Significance and Impact of the study: The use of plant–fungi association may be a promising strategy to remediate metal‐contaminated soils.     

Phytoremediation of Pb contaminated soil with polymer-coated EDTA

EDTA-assisted phytoextraction of lead (Pb) has been developed, but concerns have arisen due to the possibility of leaching of both Pb and EDTA to ground water caused by uncontrolled release. We developed five types of controlled-release EDTA (polymer-coated EDTA) by coating the EDTA with a polyolefin polymer. A test of the release rate showed that the duration for the release of 75% of total EDTA ranged from 3 to 210 days. A pot experiment was conducted to compare the effect of these polymer-coated EDTA and non-coated EDTA on the concentrations of Pb and EDTA in soil solution, and Pb accumulation in sorghum (Sorghum bicolor L. cv. EARLY SUMAC) in a Pb-contaminated soil. One of the polymer-coated EDTAs, C-EDTA-4, with a release period of 80 days proved to be the best in decreasing Pb and EDTA concentrations in soil solution, and increasing Pb accumulation in sorghum shoots compared to the direct application of EDTA. Our results suggest that polymer-coated EDTA has a potential for phytoextraction of Pb with a reduced environmental risk.     

Molar development in common chimpanzees (Pan troglodytes)

Numerous studies have reported on enamel and dentine development in hominoid molars, although little is known about intraspecific incremental feature variation. Furthermore, a recent histological study suggested that there is little or no time between age at chimpanzee crown completion and age at molar eruption, which is unlikely given that root growth is necessary for tooth eruption. The study presented here redefines growth standards for chimpanzee molar teeth and examines variation in incremental features. The periodicity of Retzius lines in a relatively large sample was found to be 6 or 7 days. The number of Retzius lines and cuspal enamel thickness both vary within a cusp type, among cusps, and among molars, resulting in marked variation in formation time. Daily secretion rate is consistent within analogous cuspal zones (inner, middle, and outer enamel) within and among cusp types and among molar types. Significantly increasing trends are found from inner to outer cuspal enamel (3 to 5 microns/day). Cuspal initiation and completion sequences also vary, although sequences for mandibular molar cusps are more consistent. Cusp-specific formation time ranges from approximately 2 to 3 years, increasing from M1 to M2, and often decreasing from M2 to M3. These times are intermediate between radiographic studies and a previous histological study, although both formation time within cusps and overlap between molars vary considerably. Cusp-specific (coronal) extension rates range from approximately 4 to 9 microns/day, and root extension rates in the first 5 mm of roots range from 3 to 9 microns/day. These rates are greater in M1 than in M2 or M3, and they are greater in mandibular molars than in respective maxillary molars. This significant enlargement of comparative data on nonhuman primate incremental development demonstrates that developmental variation among cusp and molar types should be considered during interpretations and comparisons of small samples of fossil hominins and hominoids.     

Transitional reef-to-basin facies of Lower Frasnian limestones determined by microfacies analysis (Wietrznia,Holy Cross Mts,Poland)

Wietrznia section is situated between the shallow-water carbonate platform in the Kielce region and the Łysogóry basin. The transitional facies of the Wietrznia Frasnian includes two overlapping types of deposits: (1) thin-bedded dark-coloured limestone-marl alternations similar to the basin facies and (2) coarse-grained detrital limestones. Three lithotypes of limestones were identified: laminated or graded micritic, nodular, and detrital. The petrographic study makes it possible for the recognition of six major microfacies (MF 1 to MF 6). These lithotypes were formed by redeposition in a low- to high-energy environment. Their source material was the stromatoporoid-coral Dyminy reef in the central part of the Kielce region. Storms are considered to be the main agent, which causes in erosion and transport; micritic limestones and distal tempestites occur together, whereas detrital limestones are associated with proximal tempestites. Most probably, part of the detrital beds was formed as a result of grain-flow initiated under storm conditions.     

The extent and significance of petroleum hydrocarbon contamination in Crater Lake,Oregon

In order to evaluate hydrocarbon inputs to Crater Lake from anthropogenic and natural sources, samples of water, aerosol, surface slick and sediment were collected and analyzed by gas chromatography-mass spectrometry (GC-MS) for determination of their aliphatic and aromatic hydrocarbon concentrations and compositions. Results show that hydrocarbons originate from both natural (terrestrial plant waxes and algae) and anthropogenic (petroleum use) sources and are entering the lake through direct input and atmospheric transport. The concentrations of petroleum hydrocarbons range from low to undetectable. The distributions and abundances of n-alkanes, polycyclic aromatic hydrocarbons (PAH) and unresolved complex mixture (UCM) from petroleum are similar for all surface slick sampling sites. The estimated levels of PAH in surface slicks range from 7–9 ng/m² which are low. Transport of petroleum-derived hydrocarbons from the lake surface has resulted in their presence in some sediments, particularly near the boat operations mooring (total petroleum HC = 1440 μg/kg, dry wt. compared to naturally derived n-alkanes, 240 μg/kg, dry wt.). The presence of biomarkers such as the tricyclic terpanes, hopanes and steranes in shallow sediments further confirms petroleum input from boat traffic. In the deep lake sediments, petroleum hydrocarbon concentrations were very low (16 μg/kg, dry wt.). Very low concentrations of PAH were detected in shallow sediments (17–40 μg/kg at 5 m depth near the boat operations) and deep sediments (3–15 μg/kg at 580 m depth). The individual PAH concentrations in sediments (μg/kg or ppb range) are at least three orders of magnitude less than reported threshold effects levels (mg/kg or ppm range, test amphipod Hyalella azteca). Therefore, no adverse effects are expected to occur in benthic biota exposed to these sediments. Boating activities are leaving a detectable level of petroleum in surface waters and lake sediments but these concentrations are very low.     

铜、铅、镉、锌、汞和银离子复合污染对水螅的急性毒性效应

以水螅(Hydrasp)为例,通过单因子静态急性毒性试验方法和等毒性溶液法,分别研究Hg2 、Cu2 、Cd2 、Ag 、Zn2 和Pb2 对其单一和复合毒性效应。单一实验结果表明,它们对水螅毒性大小顺序为Hg2 >Cu2 >Cd2 >Ag >Zn2 >Pb2 。复合毒性实验表明,Zn2 与Cu2 、Hg2 、Pb2 、Ag ;Pb2 与Cu2 ;Hg2 与Ag ;Pb2 与Ag 这些组合对水螅联合急性毒性总体上表现出拮抗作用,Cd2 与Cu2 、Hg2 、Pb2 、Ag 组合总体上则是协同作用,Zn2 与Cd2 、Pb2与Hg2 、Cu2 与Hg2 ,Ag 在不同的浓度水平组合下明显表现出不同的毒性效应。     

土壤重金属向节肢动物的传递及影响

土壤中重金属可通过食物链传递至节肢动物,并在其体内累积。文章介绍影响重金属传递和积累的主要因子,及重金属对植食性、捕食性、寄生性、腐食性节肢动物种群及群落的影响情况。建议对影响传递与累积的机制开展深入研究,并重点从节肢动物群落生态学、行为学、生理学等角度开展更多工作。