Beautiful,complicated—and intelligent? Novel aspects of the thigmonastic stamen movement in Loasaceae

In a recent study we investigated the complex mechanisms regulating the pollen release via thigmonastic stamen movement found exclusively in Loasaceae subfamily Loasoideae. We demonstrated that stamen movement is modulated by abiotic (light and temperature) as well as biotic stimuli (pollinator availability and visitation frequency). This is explained as a mechanism to adjust the rate of stamen movement and thus pollen dispensation to different environmental conditions in order to optimize pollen transfer. Stamen movement is rapid and thus a near-immediate response to pollinator visits. However, Loasaceae flowers also show a response to biotic stimuli on a longer time scale, by adjusting the duration of both the staminate and the carpellate phase of the anthesis. We here present two additional data sets on species not previously studied, underscoring the shortening of the staminate phase in the presence of pollinator visits vs. their absence and the shortening of the carpellate phase after pollination. Overall, the plant shows not only a rapid but an “intelligent” reaction to its environment in adjusting anthesis and pollen presentation to a range of factors. The physiological and morphological bases of the stamen movement are poorly understood. Our previous study showed that there is no direct spatial relationship between the place of stimulation in the flower and the stamen bundle activated. We here further show the morphological basis for stamen movement from a reflexed into an erect position: Only the basal part of the filament curves around the receptacle, while the upper part of the filament retains its shape. We hypothesize that the stimulus is transmitted over the entire receptacle and the place of reaction is determined by stamen maturity, not the location of the stimulus.     

Pluripotency of embryonic stem cells lacking clathrin-mediated endocytosis cannot be rescued by restoring cellular stiffness

Mouse embryonic stem cells (mESCs) display unique mechanical properties, including low cellular stiffness in contrast to differentiated cells, which are stiffer. We have previously shown that mESCs lacking the clathrin heavy chain (Cltc), an essential component for clathrin-mediated endocytosis (CME), display a loss of pluripotency and an enhanced expression of differentiation markers. However, it is not known whether physical properties such as cellular stiffness also change upon loss of Cltc, similar to what is seen in differentiated cells, and if so, how these altered properties specifically impact pluripotency. Using atomic force microscopy (AFM), we demonstrate that mESCs lacking Cltc display higher Young''s modulus, indicative of greater cellular stiffness, compared with WT mESCs. The increase in stiffness was accompanied by the presence of actin stress fibers and accumulation of the inactive, phosphorylated, actin-binding protein cofilin. Treatment of Cltc knockdown mESCs with actin polymerization inhibitors resulted in a decrease in the Young''s modulus to values similar to those obtained with WT mESCs. However, a rescue in the expression profile of pluripotency factors was not obtained. Additionally, whereas WT mouse embryonic fibroblasts could be reprogrammed to a state of pluripotency, this was inhibited in the absence of Cltc. This indicates that the presence of active CME is essential for the pluripotency of embryonic stem cells. Additionally, whereas physical properties may serve as a simple readout of the cellular state, they may not always faithfully recapitulate the underlying molecular fate.     

FRET and optical trapping reveal mechanisms of actin activation of the power stroke and phosphate release in myosin V

Myosins generate force and motion by precisely coordinating their mechanical and chemical cycles, but the nature and timing of this coordination remains controversial. We utilized a FRET approach to examine the kinetics of structural changes in the force-generating lever arm in myosin V. We directly compared the FRET results with single-molecule mechanical events examined by optical trapping. We introduced a mutation (S217A) in the conserved switch I region of the active site to examine how myosin couples structural changes in the actin- and nucleotide-binding regions with force generation. Specifically, S217A enhanced the maximum rate of lever arm priming (recovery stroke) while slowing ATP hydrolysis, demonstrating that it uncouples these two steps. We determined that the mutation dramatically slows both actin-induced rotation of the lever arm (power stroke) and phosphate release (≥10-fold), whereas our simulations suggest that the maximum rate of both steps is unchanged by the mutation. Time-resolved FRET revealed that the structure of the pre– and post–power stroke conformations and mole fractions of these conformations were not altered by the mutation. Optical trapping results demonstrated that S217A does not dramatically alter unitary displacements or slow the working stroke rate constant, consistent with the mutation disrupting an actin-induced conformational change prior to the power stroke. We propose that communication between the actin- and nucleotide-binding regions of myosin assures a proper actin-binding interface and active site have formed before producing a power stroke. Variability in this coupling is likely crucial for mediating motor-based functions such as muscle contraction and intracellular transport.     

Subtractive phage display technology identifies zebrafish marcksb that is required for gastrulation

In the present study, we used a phage display technique to screen differentially expressed proteins from zebrafish post-gastrula embryos. With a subtractive screening approach, 6 types of single-chain Fv fragments (scFvs) were screened out from an scFv antibody phage display library by biopanning against zebrafish embryonic homogenate. Four scFv fragments (scFv1, scFv3, scFv4 and scFv6) showed significantly stronger binding to the tailbud embryos than to the 30%-epiboly embryos. A T7 phage display cDNA library was constructed from zebrafish tailbud embryos and used to identify the antigens potentially recognized by scFv1, which showed the highest frequency and strongest binding against the tailbud embryos. We acquired 4 candidate epitopes using scFv1 and the corresponding genes showed significantly higher expression levels at tailbud stage than at 30%-epiboly. The most potent epitope of scFv1 was the clone scFv1-2, which showed strong homology to zebrafish myristoylated alanine-rich C-kinase substrate b (Marcksb). Western blot analysis confirmed the high expression of marcksb in the post-gastrula embryos, and the endogenous expression of Marcksb was interfered by injection of scFv1. Zebrafish marcksb showed dynamic expression patterns during embryonic development. Knockdown of marcksb strongly affected gastrulation movements. Moreover, we revealed that zebrafish marcksb is required for cell membrane protrusion and F-actin alignment. Thus, our study uncovered 4 types of scFvs binding to zebrafish post-gastrula embryos, and the epitope of scFv1 was found to be required for normal gastrulation of zebrafish. To our knowledge, this was the first attempt to combine phage display technique with the embryonic and developmental study of vertebrates, and we were able to identify zebrafish marcksb that was required for gastrulation.     

Monte Carlo Simulations of the Chemical Potential and Free Energy for Trimer and Hexamer Rings

Abstract

The chemical potential of a trimer and hexamer model ring system was determined by computer simulation over a range of temperatures and densities. Such ring molecules are important as model aromatic and naphthenic hydrocarbons. Thermodynamic integration of the pressure along a reversible path, Widom's ghost particle insertion method and Kirkwood's charging parameter method were used over a molecular density range of 0.05 to 0.30. Data were obtained by Monte Carlo simulation of a 96 molecule system that was modelled with a Lennard-Jones 6-12 truncated potential. The original insertion method, which does not take into account the orientation of the molecule when it is inserted, gives results for the chemical potential which deviate from that obtained using the thermodynamic pressure integration. At high density or temperature the deviation is significant. We have modified the Widom insertion technique to account for this short range orientation and find good agreement between this technique and the thermodynamic integration method for the chemical potential. We also calculated the free energy difference between our model ring molecules and ring molecules made up of hard spheres.     

The N-BAR domain protein,Bin3, regulates Rac1- and Cdc42-dependent processes in myogenesis

Actin dynamics are necessary at multiple steps in the formation of multinucleated muscle cells. BAR domain proteins can regulate actin dynamics in several cell types, but have been little studied in skeletal muscle. Here, we identify novel functions for the N-BAR domain protein, Bridging integrator 3 (Bin3), during myogenesis in mice. Bin3 plays an important role in regulating myofiber size in vitro and in vivo. During early myogenesis, Bin3 promotes migration of differentiated muscle cells, where it colocalizes with F-actin in lamellipodia. In addition, Bin3 forms a complex with Rac1 and Cdc42, Rho GTPases involved in actin polymerization, which are known to be essential for myotube formation. Importantly, a Bin3-dependent pathway is a major regulator of Rac1 and Cdc42 activity in differentiated muscle cells. Overall, these data classify N-BAR domain proteins as novel regulators of actin-dependent processes in myogenesis, and further implicate BAR domain proteins in muscle growth and repair.     

Insight into Actin Organization and Function in Cytokinesis from Analysis of Fission Yeast Mutants

Actin is a key cytoskeletal protein with multiple roles in cellular processes such as polarized growth, cytokinesis, endocytosis, and cell migration. Actin is present in all eukaryotes as highly dynamic filamentous structures, such as linear cables and branched filaments. Detailed investigation of the molecular role of actin in various processes has been hampered due to the multifunctionality of the protein and the lack of alleles defective in specific processes. The actin cytoskeleton of the fission yeast, Schizosaccharomyces pombe, has been extensively characterized and contains structures analogous to those in other cell types. In this study, primarily with the view to uncover actin function in cytokinesis, we generated a large bank of fission yeast actin mutants that affect the organization of distinct actin structures and/or discrete physiological functions of actin. Our screen identified 17 mutants with specific defects in cytokinesis. Some of these cytokinesis mutants helped in dissecting the function of specific actin structures during ring assembly. Further genetic analysis of some of these actin mutants revealed multiple genetic interactions with mutants previously known to affect the actomyosin ring assembly. We also characterize a mutant allele of actin that is suppressed upon overexpression of Cdc8p-tropomyosin, underscoring the utility of this mutant bank. Another 22 mutant alleles, defective in polarized growth and/or other functions of actin obtained from this screen, are also described in this article. This mutant bank should be a valuable resource to study the physiological and biochemical functions of actin.