In vitro micropropagation and plant establishment of muscadine grape cultivars (Vitis rotundifolia)

Shoot apical meristems were used to establish regenerative axillary bud cultures of 9 muscadine grape cultivars. Meristems taken from 10 cm long shoots had less contamination (3%) and a higher survival rate (94%) than those from shorter or longer shoots. Of media tested, MS, 1/2 MS, and C₂D resulted in equivalent shoot proliferation rates, whereas, WPM produced stunted shoots. When pooling results for 3 cultivars, 5, 10 and 20 M BA and 5 M TDZ produced the highest average number of shoots per cultured apex (3.4–3.8). However, shoots produced with TDZ were stunted and did not root well. For rooting of shoots directly in potting mix, a rooting powder pretreatment significantly increased the number of roots per shoot but did not affect percent rooting or root length. For rooting in vitro, 1 M NAA significantly increased all parameters measured. Although more shoots rooted in vitro than in vivo (77% vs. 46%), the latter was judged preferable since acclimatized plants were produced in less time and a major culture step was eliminated. Significant differences among cultivars were noted for measured responses in all experiments.Abbreviations BA benzyladenine - Kin kinetin - MS Murashige & Skoog (medium) - NAA naphthaleneacetic acid - TDZ thidiazuron - WPM woody plant medium     

In vitro vegetative propagation of Chinese cabbage

Explants from cotyledons, axillary buds, inflorescence stems and flower buds of Brassica campestris ssp. pekinensis (Lour.) Olsson (Chinese cabbage, cv. Wongbok) were cultured on MS medium with growth regulators. Multiple shoots were obtained from cotyledons, axillary buds and flower buds but not from inflorescence stems. Propagation of shoots from cotyledons was more successful than from axillary buds and flower buds. The vegetative propagation rates varied amongst clones derived from cotyledons of the same cultivar and seed lot. The propagation rates of the cotyledon-derived material followed a normal distribution with an average propagation rate of 2.6 shoots per two weeks subculture when cultured on MS media plus 44.4 m benzyladenine (BA) and 14.8 m -indolebutyric acid (IBA). Shoots from three clones were cultured on MS medium with nine different concentrations of BA. The concentration of BA which promoted the highest rate of shoot propagation varied for the three clones and was in the range 44.4 to 177.6 m.     

Progress in the biotechnology of trees

An increasing world population and rise in demand for tree products, especially wood, has increased the need to produce more timber through planting more forest with improved quality stock. Superior trees are likely to arise from several sources. Firstly, forest trees can be selected from wild populations and cloned using macropropagation techniques already being investigated for fruit tree rootstocks. Alternatively, propagation might be brought aboutin vitro through micropropagation or sustained somatic embryogenesis, with encapsulation of the somatic embryos to form artificial seeds. Tree quality could be improved through increased plant breeding and it is likely that experienced gained, to date, in the breeding of fruit species will be useful in devising strategies for forest trees. Since the development of techniques to regenerate woody plants from explant tissues, cells and protoplasts, it is now feasible to test the use of tissue culture methods to bring about improvements in tree quality. Success has already been achieved for tree species in the generation of somaclonal and protoclonal variation, the formation of haploids, triploids and polyploids, somatic hybrids and cybrids and the introduction of foreign DNA through transformation. This review summarizes the advances made so far in tree biotechnology, and suggests some of the directions that it might take in the future.     

The cellular parameters of leaf development in tobacco: a clonal analysis

The cellular parameters of leaf development in tobacco (Nicotiana tabacum L.) have been characterized using clonal analysis, an approach that provides unequivocal evidence of cell lineage. Our results indicate that the tobacco leaf arises from a group of around 100 cells in the shoot apical meristem. Each of these cells contributes to a unique longitudinal section of the axis and transverse section of the lamina. This pattern of cell lincage indicates that primordial cells contribute more or less equally to the growth of the axis, in contrast to the more traditional view of leaf development in which the leaf is pictured as arising from a group of apical initials. Clones induced prior to the initiation of the lamina demonstrate that the subepidermal layer of the lamina arises from at least six files of cells. Submarginal cells usually divide with their spindles parallel to the margin, and therefore contribute relatively little to the transverse expansion of the lamina. During the expansion of the lamina the orientation and frequency of cell division are highly regulated, as is the duration of meristematic growth. Initially, cell division is polarized so as to produce lineages that are at an oblique angle to the midrib; later cell division is in alternating perpendicular planes. The distribution of clones generated by irradiation at various stages of development indicates that cell division ceases at the tip of the leaf when the leaf is about one tenth its final size, and then ceases in progressively more basal regions of the lamina. Variation in the mutation frequency within the lamina reflects variation in the frequency of mitosis. Prior to the mergence of the leaf the frequency of mutation is maximal near the tip of the leaf and extremely low at its base; after emergence, the frequency of mutation increases at the base of the leaf. In any given region of the lamina the frequency of mutation is highest in interveinal regions, and is relatively low near the margin. Thus, both the orientation and frequency of cell division at the leaf margin indicate that this region plays a minor role in the growth of the lamina.Abbreviation MF mutation frequency     

In vitro regeneration of Ruscus hypophyllum L. plants

Callus cultures were established from stem explants of Ruscus hypophyllum on a modified basal medium of Murashige and Skoog (1962) supplemented with 1 mg l^-1 2,4-D+0.1 mg l^-1 BAP. The optimal 2,4-D concentration for promoting shoot bud formation and growth was 0.05 mg l^-1 along with 0.5 mg l^-1 BAP. Sixty percent of rootless shoots produced flowers on the regenerating medium. Rooting was induced when shoots were transferred to half strength MS inorganic salts supplemented with 2 mg l^-1 IBA. Eighty percent of plants transferred to soil have survived.     

In vitro propagation of cassava (Manihot esculenta Crantz)

A method is presented for the rapid in vitro propagation of cassava (Manihot esculenta Crantz). Nodal explants were induced to grow as multiple-shoot cultures on a medium containing 1.0 M 6-benzylamino purine (BAP), supplemented with 0.25 M -naphthaleneacetic acid (NAA). Nodes were removed from the shoots after three weeks of growth and subcultured on fresh culture medium. An average of 7.0 nodes were produced from each explanted node after three weeks in culture. Nodal explants were transferred to a medium containing 2.5 M indole-3-butyric acid (IBA) to improve root initiation on the developing plantlets. Plant establishment was possible upon transfer to soil. In vitro propagation offers enhanced rates of multiplication over more conventional methods of propagation. In addition, in vitro propagation facilitates the storage and international exchange of cassava germplasm.     

Physical conditions of propagation media and their influence on the rooting of cuttings

Summary The formation and subsequent growth of roots by cuttings of poinsettia, hydrangea, rose and azalea in various propagation media, Jiffy-7, Jiffy-9 and Grodan under different conditions of aeration was investigated. The interrelationships of the effects of air content of the media, temperature and light intensity on the rooting of poinsettia cuttings was also studied.With low air contents (0 cm moisture tension) in the propagation media the formation and growth of roots was strongly inhibited. The rooting performance of rose appeared to be less affected by the poor aeration. Increasing air content improved rooting but best results were obtained at moisture tensions of 4 to 8 cm. Rooting seems to be better correlated with oxygen diffusion rate (ODR) than with air content.For poinsettia cuttings the optimum temperature for rooting was 24 to 28°C. At low temperatures rooting was delayed while at higher temperatures it was almost completely inhibited. Callus formation increased with temperature but decreased with increasing moisture tension. Conditions which induced large callus formation inhibited root formation.High light intensity during rooting reduced overall rooting performance and the inhibition was most pronounced in conjunction with high moisture tensions.Report No. 255.     

Lipid Peroxidation. Definition of Experimental Conditions for Selective Study of the Propagation and Termination Phases

To find experimental conditions to selectively study the propagation phase of lipoperoxidation we studied the lipoperoxidation, catalyzed by FeCl₂, of liposomes in a buffering condition where Fe²⁺ autoxidation and oxygen active species generation does not occur. Liposomes from egg yolk phosphatidylcholine. prepared by vortex mixing, do not oxidize Fe²⁺: on the contrary they oxidize Fe²⁺ when prepared by ultrasonic irradiation. Dimyristoyl phosphatidylcholine liposomes prepared by ultrasonic irradiation do not oxidize Fe²⁺. During sonication polyunsaturated fatty acid residues autoxidize and lipid hydroperoxides (LOOH) are generated. Only when LOOH are present in the liposimes Fe²⁺ oxidizes and its rate of oxidation depends on the amount of LOOH in the assay. The reaction results in the generation of both LOOH and thiobarbituric acid reactive material (TBAR): it is inhibited by butylated hydroxytoluene and has a acidic pH optimum; it is not inhibited by catalase and OH' scavengers. The reaction studied. thus, appears to be the chain branching and propagation phase of lipoperoxidation. When we studied the dependence of Fe²⁺ oxidation, LOOH and TBAR generation on FeCl₂ concentration, we observed that at high FeCl₂ concentrations the termination phase of lipoperoxidation was prevalent. Thus. by selecting the appropriate FeCl₂ concentration the proposed experimental system allows study of either the propagation or the termination phase of lipoperoxidation.     

The types of bioreactors used for shoots and embryos

Plant regenerated organs such as shoots, bulbs, microtubers, corms, embryos, etc. have been successfully proliferated in the bioreactor. The use of a bioreactor leads to the development of technology suitable for large scale plant propagation. The basic construction and characteristics of various types of bioreactor systems are reviewed in relation to shoot and embryo cultures. A pilot scale 500 liter bioreactor system was applied to the production of large scale Stevia rebaudiana shoots.Abbreviations DW dry weight - EC electrical conductivity - FW fresh weight - ORP oxidation-reduction potential     

Promotion by phloroglucinol of adventitious root formation in micropropagated shoots of adult wild cherry (Prunus avium L.)

Micropropagated shoots of wild cherry (Prunus avium L.) produced roots in auxin-free medium. Phloroglucinol (PG) increased the proportion of shoots that rooted, while phloretic acid reduced this response in medium with or without PG, and cancelled the promotive effect of PG. Concentration of PG also significantly affected rooting in media with and without auxin. The proportion of shoots rooting in media containing auxin, or auxin plus PG, increased with the number of successive subculture, but the proportion that rooted with PG alone was unaffected by the number of subcultures. Before the shoots had become responsive to auxin, 1 mM PG was more effective than auxin in inducing root formation.