UV-C irradiation as a tool to eradicate algae in caves

Algal proliferation has commonly been reported to occur on monuments, such as crypts, churches, and caves, as soon as artificial lighting is used. In this work we study the effects of UV-C irradiation on algae collected in different caves in Dordogne (southwest of France). First, the effect of UV-C irradiation was tested on algal cell suspensions during increasing exposure times. After treatment, the photosynthetic capacity was assayed using a polarometric method, and algal cell viability was then estimated using a Trypan blue test after a rest period of 15 h. UV-C irradiation was then studied on algal cells cultivated on a solid support consisting of pieces of calcareous stone. Drops of concentrated algal cells were inoculated on stone and exposed to UV-C radiation for 3, 6, or 9 h. After this irradiation, half of the samples were submitted to a high white light intensity (1400 ??mol m⁻² s⁻¹ of photosynthetically active radiation, PAR) for 6 h while the other half were incubated in the culture room. Subsequently, algal macroscopic parameters such as covering rate and colonized area were measured by macro photography. Both experiments led to the conclusion that UV-C irradiation has deleterious effects on photosynthetic parameters and growth of algal cells.     

西藏小型猪与高原藏猪的血液生理生化值的比较

目的比较西藏小型猪与高原藏猪的血液生理、生化指标的差异。方法采用全自动血液细胞和生化分析仪测定21个血液生理生化指标。结果藏猪与西藏小型猪之间,红细胞、白细胞、血小板计数、总胆固醇、血清甘油三酯指标的测定差异有显著性,谷草转氨酶、血清总蛋白、血清清蛋白、葡萄糖、肌酸激酶指标的测定差异极显著。其中红细胞、白细胞、谷草转氨酶、肌酸激酶的值藏猪高于西藏小型猪,而血小板计数、血清总蛋白、血清清蛋白、葡萄糖、总胆固醇、血清甘油三酯的值藏猪低于西藏小型猪。结论不同的生活环境、气候条件和营养水平会对动物的血液生理、生化值的测定造成一定的影响。     

Production and characterization of Acidothermus cellulolyticus endoglucanase in Pichia pastoris

The endoglucanase (E1) from Acidothermus cellulolyticus has been used extensively in cellulase research. The goal of this work was to produce high levels of this enzyme in a system that facilitates purification. A codon-optimized synthetic gene for A. cellulolyticus E1 with a C-terminal histidine tag was cloned into the genome of Pichia pastoris. Strain KM71H expressed the most enzyme, with a yield of 550mg/L culture supernatant. The temperature optimum (80°C) and pH optimum (5.1) of the purified enzyme agree with previously determined values for the enzyme produced in other systems. Michaelis-Menten kinetic parameters were determined, using a fluorescent substrate (methylumbelliferyl-β-d-cellobioside) at various temperatures. This thermostable enzyme can be used in future cellulosic biofuels-related research.     

Body development in sows, feed intake and maternal capacity. Part 2: gilt body condition before and after lactation, reproductive performance and correlations with lactation feed intake

Data on sow body weight (BW) and fatness (n = ~2250 pregnant sows) and reproductive data (including historical: n = ~18 000) were used to examine the genetic and phenotypic associations between body condition before and after farrowing, gestational outcomes, lactation feed intake and the gilts' ability to survive unculled to farrow in the second parity. Within-trait genetic correlations were very high between weight (0.77 ± 0.06) and fat depth (0.91 ± 0.04) recorded before farrowing and at weaning. Litter size traits were generally uncorrelated genetically with aspects of sow BW and body condition. However, genetic correlations indicated that sows producing heavier piglets at birth had litters with increased gain (0.36 ± 0.16), and were characterised by greater weight (-0.72 ± 0.08) and fat change (-0.19 ± 0.15) during lactation, reflected to a lesser extent by lower weight (-0.12 ± 0.11) and fatness (-0.17 ± 0.10) at weaning. Genetic correlations (r(a)) between reproductive traits and lactation feed intake were generally low, but favourable. However, lactation intake was positively correlated with measures of sow size (r(a) = ~0.55), such that selection for lactation feed intake would likely be accompanied by increased mature sow size. Phenotypic correlations (r(p)) showed that sow survival to the second parity (FAR12) was positively influenced by litter size and fat depth at weaning, supporting attributes of increased fatness before farrowing, less weight loss during lactation and an increased lactation intake.     

Genetic variation in wholesale carcass cuts predicted from digital images in cattle

The objective of this study was to quantify the genetic variation in carcass cuts predicted using digital image analysis in commercial cross-bred cattle. The data set comprised 38,404 steers and 14,318 heifers from commercial Irish herds. The traits investigated included the weights of lower value cuts (LVC), medium value cuts (MVC), high value cuts (HVC), very high value cuts (VHVC) and total meat weight. In addition, the weights of total fat and total bones were available on the steers. Heritability of carcass cut weights, within gender, was estimated using an animal linear model, whereas genetic and phenotypic correlations among cuts were estimated using a sire linear model. Carcass weight was included as a covariate in all models. In the steers, heritability ranged from 0.13 (s.e. = 0.02) for VHVC to 0.49 (s.e. = 0.03) for total bone weight, and in the heifers heritability ranged from 0.15 (s.e. = 0.04) for MVC to 0.72 (s.e. = 0.06) for total meat weight. The coefficient of genetic variation for the different cuts varied from 1.4% to 3.6%. Genetic correlations between the different cut weights were all positive and ranged from 0.45 (s.e. = 0.08) to 0.89 (s.e. = 0.03) in the steers, and from 0.47 (s.e. = 0.14) to 0.82 (s.e. = 0.06) in the heifers. Genetic correlations between the wholesale cut weights and carcass conformation ranged from 0.32 (s.e. = 0.06) to 0.45 (s.e. = 0.07) in the steers, and from 0.10 (s.e. = 0.12) to 0.38 (s.e. = 0.09) in the heifers. Genetic correlations between the same wholesale cut traits in steers and heifers ranged from 0.54 (s.e. = 0.14) for MVC to 0.79 (s.e. = 0.06) for total meat weight; genetic correlations between carcass weight and carcass classification for conformation and fat score in both genders varied from 0.80 to 0.87. The existence of genetic variation in carcass cut traits, coupled with the routine availability of predicted cut weights from digital image analysis, clearly shows the potential to genetically improve carcass value.     

Variation in carbon footprint of milk due to management differences between Swedish dairy farms

To identify mitigation options to reduce greenhouse gas (GHG) emissions from milk production (i.e. the carbon footprint (CF) of milk), this study examined the variation in GHG emissions among dairy farms using data from previous CF studies on Swedish milk. Variations between farms in these production data, which were found to have a strong influence on milk CF, were obtained from existing databases of 1051 dairy farms in Sweden in 2005. Monte Carlo (MC) analysis was used to analyse the impact of variations in seven important parameters on milk CF concerning milk yield (energy-corrected milk (ECM) produced and delivered), feed dry matter intake (DMI), enteric CH4 emissions, N content in feed DMI, N-fertiliser rate and diesel used on farm. The largest between-farm variations among the analysed production data were N-fertiliser rate (kg/ha) and diesel used (l/ha) on farm (CV = 31% to 38%). For the parameters concerning milk yield and feed DMI, the CV was approximately 11% and 8%, respectively. The smallest variation in production data was found for N content in feed DMI. According to the MC analysis, these variations in production data led to a variation in milk CF of between 0.94 and 1.33 kg CO2 equivalents (CO2e)/kg ECM, with an average value of 1.13 kg CO2e/kg ECM. We consider that this variation of ±17%, which was found to be based on the used farm data, would be even greater if all Swedish dairy farms were included, as the sample of farms in this study was not totally unbiased. The variation identified in milk CF indicates that a potential exists to reduce GHG emissions from milk production on both the national and farm levels through changes in management. As milk yield and feed DMI are two of the most influential parameters for milk CF, feed conversion efficiency (i.e. units ECM produced/unit DMI) can be used as a rough key performance indicator for predicting CF reductions. However, it must be borne in mind that feeds have different CF due to where and how they are produced.     

A novel approach for estimating growth phases and parameters of bacterial population in batch culture

Using mathematical analysis, a new method has been developed for studying the growth kinetics of bacterial populations in batch culture. First, sampling data were smoothed with the spline interpolation method. Second, the instantaneous rates were derived by numerical differential techniques and finally, the derived data were fitted with the Gaussian function to obtain growth parameters. We named this the Spline-Numerical-Gaussian or SNG method. This method yielded more accurate estimates of the growth rates of bacterial populations and new parameters. It was possible to divide the growth curve into four different but continuous phases based on changes in the instantaneous rates. The four phases are the accelerating growth phase, the constant growth phase, the decelerating growth phase and the declining phase. Total DNA content was measured by flow cytometry and varied depending on the growth phase. The SNG system provides a very powerful tool for describing the kinetics of bacterial population growth. The SNG method avoids the unrealistic assumptions generally used in the traditional growth equations.     

Order parameters of unsaturated phospholipids in membranes and the effect of cholesterol: a 1H–13C solid-state NMR study at natural abundance

Most biological phospholipids contain at least one unsaturated alkyl chain. However, few order parameters of unsaturated lipids have been determined because of the difficulty associated with isotopic labeling of a double bond. Dipolar recoupling on axis with scaling and shape preservation (DROSS) is a solid-state nuclear magnetic resonance technique optimized for measuring ¹H–¹³C dipolar couplings and order parameters in lipid membranes in the fluid phase. It has been used to determine the order profile of 1,2-dimyristoyl-sn-glycero-3-phosphocholine hydrated membranes. Here, we show an application for the measurement of local order parameters in multilamellar vesicles containing unsaturated lipids. Taking advantage of the very good ¹³C chemical shift dispersion, one can easily follow the segmental order along the acyl chains and, particularly, around the double bonds where we have been able to determine the previously misassigned order parameters of each acyl chain of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC). We have followed the variation of such order profiles with temperature, unsaturation content and cholesterol addition. We have found that the phase formed by DOPC with 30% cholesterol is analogous to the liquid-ordered (l_o) phase. Because these experiments do not require isotopic enrichment, this technique can, in principle, be applied to natural lipids and biomembranes.Electronic Supplementary Material Supplementary material is available for this article at .     

Growth parameters and photosynthetic pigments in leaf segments of Zea mays exposed to cadmium, as related to protection mechanisms

The influence of cadmium on growth parameters and photosynthetic pigment content was studied in maize leaf segments differing in tissue maturity. Experiments were carried out with maize seedlings Zea mays L. cv. Hidosil treated with 25, 50, 100, 150 and 200 microM Cd for 14 days under low light conditions. Tissue age-dependent decrease of fresh mass, dry mass and area of the leaf segments was correlated with Cd concentration in the growth medium. Cd induced changes in chlorophyll and carotenoid contents, and the specific areas and densities of the leaf segments were dependent on age and metal concentration. Results are discussed with respect to the protection mechanisms in the leaf segments.     

Influence of diet on life table parameters of <Emphasis Type="Italic">Iphiseius degenerans</Emphasis> (Acari: Phytoseiidae)

Studies on the reproduction, longevity and life table parameters of Iphiseius degenerans (Berlese) were carried out under laboratory conditions of 25 ± 1 °C, 75 ± 5% RH and 16L:8D h. As food sources for the predatory mite, Ricinus communis L. pollen, all stages of the spider mite Tetranychus urticae Koch, Frankliniella occidentalis (Pergande) larvae, and Ephestia kuehniella Zeller eggs were selected. All diets were accepted as food by the adult mites. Female longevity ranged from 29.5 to 42.4 days, the highest value was recorded on a diet of Ephestia eggs. The highest percentage of females escaping the experimental arena was observed on the diet consisting of thrips larvae. The highest oviposition rate (1.9 eggs/female.day) was recorded when the predator was fed on spider mites on an artificial substrate. For other diets, oviposition rates ranged from 1.0 to 1.3 eggs/female.day. The intrinsic rate of natural increase (r _m) of I. degenerans varied between 0.015 and 0.142 females/female.day. The diet consisting of castor bean pollen resulted in the highest population growth whereas the diet on spider mites brushed off onto a bean leaf arena resulted in the slowest population growth. This can be explained by the inability of the predator to cope with the webbing of T. urticae, and the high escape rate of the progeny when reared on spider mites. The percentage of females in the offspring ranged from 40 to 73%.This revised version was published online in May 2005 with a corrected cover date.