Acetic acid formation in Escherichia coli fermentation

Theoretical analysis of cellulase product inhibition (by cellobiose and glucose) has been performed in terms of the mathematical model for enzymatic cellulose hydrolysis. The analysis showed that even in those cases when consideration of multienzyme cellulase system as one enzyme (cellulase) or two enzymes (cellulase and beta-glucosidase) is valid, double-reciprocal plots, usually used in a product inhibition study, may be nonlinear, and different inhibition patterns (noncompetitive, competitive, or mixed type) may be observed. Inhibition pattern depends on the cellulase binding constant, enzyme concentration, maximum adsorption of the enzyme (cellulose surface area accessible to the enzyme), the range in which substrate concentration is varied, and beta-glucosidase activity. A limitation of cellulase adsorption by cellulose surface area that may occur at high enzyme/substrate ratio is the main reason for nonlinearity of double-reciprocal plots. Also, the results of calculations showed that material balance by substrate, which is usually neglected by researchers studying cellulase product inhibition, must be taken into account in kinetic analysis even in those cases when the enzyme concentration is rather low. (c) 1992 John Wiley & Sons, Inc.     

Effect of alteration of the acetic acid synthesis pathway on the fermentation pattern of escherichia coli

The glucose metabolism of an Escherichia coli strain bearing mutations abolishing both acetyl phosphotransferase (PTA) and acetate kinase (ACK) activities was studied under aerobic and anaerobic conditions. These studies were conducted in a complex medium with the mutant carrying no plasmid, the mutant carrying the common cloning vector pUC19, and the mutant carrying a plasmid bearing the "pet" operon that encodes Zymomonas mobilis pyruvate decarboxylase and alcohol dehydrogenase activities. The mutant carrying no plasmid showed lower specific growth and glucose uptake rates relative to the parent wild-type strain (K-12), Lactic acid was produced at higher levels than the wild type, and considerable amounts of pyruvic acid were secreted as an unusual byproduct. Analysis of other fermentation products showed low but significant amounts of acetic acid, no accumulation of formic acid, and lower secretion of succinate and ethanol. The maintenance of the plasmid pUC19 in the mutant negatively affected metabolism. Expression of the pet operon overcame the metabolic stress caused by the plasmid, enhancing growth and glucose uptake rates to the values observed in the plasmidfree mutant. Also, expression of the pet operon allowed consumption of pyruvate accumulated during the first hours of fermentation.     

Optimal nonsingular control of fed-batch fermentation

Presented is a new simple method for multidimensional optimization of fed-batch fermentations based on the use of the orthogonal collocation technique. Considered is the problem of determination of optimal programs for fermentor temperature, substrate concentration in feed, feeding profile, and process duration. By reformulation of the state and control variables is obtained a nonsingular form of the optimization problem which has considerable advantage over the singular case since a complicated procedure for determination of switching times for feeding is avoided. The approximation of the state variables by Lagrange polynomials enables simple incorporation of split boundary conditions in the approximation, and the use of orthogonal collocations provides stability for integration of state and costate variables. The interpolation points are selected to obtain highest accuracy for approximation of the objective functional by the Radau-Lobatto formula. The control variables are determined by optimization of the Hamiltonian at the collocation points with the DFP method. Constraints are imposed on state and control variables.The method is applied for a homogeneous model of fermentation with volume, substrate, biomass, and product concentrations as the state variables. Computer study shows considerable simplicity of the method, its high accuracy for low order of approximation, and efficient convergence.     

Process development with nitrogenase-producing Escherichia coli C-M74 (pUS1) CellS

A process for the continuous fermentation of the genetically modified, nitrogenase-producing Escherichia coli C-M74 (pUS1)-strain has been developed. This strain, which is able to fix molecular nitrogen, has the nifgenes of the bacterium Klebsiella pneumoniae. Cell growth and nitrogenase activity of the enzyme have been optimized both in batch and continuous fermentations. For the fermentations, trial runs were performed by cultivating the E. coli cells in 50-ml culture bottles. The medium composition was varied in order to provide high biomass production and nitrogenase activity. For an effective fermentation control, an on-line analysis was built up for the substrates ammonium and glucose. Other medium components such as ampicillin, citric acid, acetic acid, nitrogenase activity, and protein were measured by using different off-line methods. Modern optical methods like in-line microfluorometry for monitoring the culture fluorescence and laser flow cytometry for the estimation of DNA and protein content were also employed. Plasmid stability was also determined.     

Strategies for reducing solvent toxicity in extractive fermentations

The toxicity of an Alamine 336/oleyl-alcohol extraction system on Lactobacillus delbrueckii was investigated. It was shown that the solvent affected the cells through the water-soluble portion and the immiscible portion of the solvent. While immobilization significantly protected the cells from the immiscible solvent phase, the water-soluble part of the solvent still caused toxicity to the microorganisms due to diffusion of the solvent into the matrix. Adding soybean oil to the kappa-carrageenan matrix could trap the diffusing solvent molecules, and therefore reduce the toxic effect from the water soluble portion of the solvent. The protective ability of soybean oil was quantified through mathematical modeling and experimentation.     

Optimization of batch processes involving simultaneous enzymatic and microbial reactions

Two general models for batch simultaneous enzymatic and microbial reaction (SEMR) processes are presented, the second derived from and simpler than the first and accounting for enzyme denaturation. Using the second model and parameter values from the literature, simulation was used to examine a range of enzyme addition rate strategies (in which the rate was a linear function of time) for a relatively fast ethanol fermentation and for a longer duration citric acid fermentation, both using cellulose as the substrate. For the ethanol process it is optimal (for a specific objective function which accounts for product value and enzyme cost) to add all the enzyme at the beginning of the process. But for the citric acid process a linearly decreasing enzyme addition rate, coupled with the addition of a small fraction of the enzyme at time zero, is better than pure batch operation or operation with the best constant enzyme feed rate.     

High production of alkaline protease byBacillus licheniformis in a fed-batch fermentation using a synthetic medium

Summary High production (9016 U/ml) of alkaline protease byBacillus licheniformis has been achieved. A 49% increase in production was achieved by the method used as compared with a batch process. By using a synthetic medium and a fed-batch operation controlled by the Advanced Fermentation Software (AFS) package, it was found that the keys to high production of protease are: (i) to maintain a low concentration of glucose (<0.43 g/l) in the medium; (ii) to control pH at a certain level (pH 6.50) in the culture; and (iii) to use rough type colonies as the starting culture. Our fed-batch fermentation process successfully simulates and surpasses ordinary batch fermentation processes. By using ammonium sulfate instead of soy bean flour as the only nitrogen source, an expected benefit was the elimination of unpleasant odors caused by natural organic nitrogenous components in the media. This would improve the industrial production environment.     

Production of 21% (v/v) ethanol by fermentation of very high gravity (VHG) wheat mashes

Summary Very high gravity wheat mashes containing 300 g or more sugares per liter were prepared by enzymatic hydrolysis of starch and fermented with a commercial preparation of active dry yeast. The active dry yeast used in this study was a blend of several strains ofSaccharomyces cerevisiae. The fermentation was carried out at 20°C at different pitching rates (inoculation levels) with and without the addition of yeast extract as nutrient supplement. At a pitching rate of 76 million cells per g of mash an ethanol yield of 20.4% (v/v) was obtained. To achieve this yeast extract must be added to the wheat mash as nutrient supplement. When the pitching rate was raised to 750 million cells per g of mash, the ethanol yield increased to 21.5% (v/v) and no nutrient supplement was required. The efficiency of conversion of sugar to ethanol was 97.6% at the highest pitching rate. This declined slightly with decreasing pitching rate. A high proportion of yeast cells lost viability at high pitching rates. It is suggested that nutrients released from yeast cells that lost viability and lysed, contributed to the high yield of ethanol in the absence of any added nutrients.     

Manganese as a controlling factor in mixed cultures of Lactobacillus plantarum and enterobacteriaceae

Addition of manganese, at levels of 50 ppm, to a liquid growth medium simulating adverse silage conditions had no effect on the growth or on the fermentation pattern of Enterobacter cloacae and Proteus vulgaris. Yet, the manganese strongly enhanced the growth of Lactobacillus plantarum. Co-cultures of L. plantarum and E. cloacae or P. vulgaris were, by addition of manganese ions, significantly altered in the favour of the former. This finding can be of use in mixed cultures where Enterobacteriaceae act as spoiler microorganisms.     

Fermentative products and dark CO2 fixation during germination of seeds of Cicer arietinum

During the germination of Cicer arietinum L. the amounts of ethanol, lactate and malate reached their highest values at 24 hr, the concentration of ethanol being about 4 times that of lactate and twice that of malate. The activities of phosphoenolpyruvate carboxylase and malic enzyme seem to be correlated with the ability of cotyledons to fix CO₂ from NaH¹⁴CO₃ into malate and with the further decrease in this metabolise from 36 hr onwards.