Some substrates and inhibitors of cytosolic epoxide hydrolase induce sister-chromatid exchanges in mammalian cells, but do not induce gene mutations in Salmonella typhimurium and V79 cells

Trans-stilbene oxide, trans-β-methylstyrene, 7,8-oxide, trans-β-ethylstyrene, 7,8-oxide, trans-β-propylstyrene 7,8-oxide and 4-fluorochalcone oxide were investigated for genotoxic activity in bacterial and mammalian cells, in the absence of external xenobiotic-metabolising systems. All compounds strongly enhanced the frequency of sister-chromatid exchanges (SCE) in cultured human lymphocytes. None of them was mutagenic in Salmonella typhimurium (reversion of the his⁻ strains TA98, TA100 and TA104). The limit of detection was 1/20,000 to 1/10⁶ of the activity of the positive control, benzo[a]pyrene 4,5-oxide, depending on the compound and the bacterial strain. Trans-β-methylstyrene 7,8-oxide and 4-fluorochalcone oxide were additionally tested for induction of SCE and gene mutations in the same target cells, namely Chinese hamster V79 cells. Their influence on the level of SCE was similar to that observed in human lymphocytes, whilst gene mutations (at the hprt locus) were not induced. The four investigated styrene oxide derivatives are known to be excellent substrates for a mammalian enzyme, cytosolic epoxide hydrolase (cEH). 4-Fluorochalcone oxide is a potent selective inhibitor of this enzyme and is structurally similar to the investigated styrene oxide derivatives. These properties of the test compounds however cannot explain the observed discrepancies in the results, since the genetic end point (SCE versus gene mutations) was decisive, and SCE were induced in cEH-proficient human lymphocytes as well as in cEH-deficient V79 cells.     

Production and composition of extracellular polysaccharide from cell suspension cultures of Mentha

A suspension culture of Mentha was established from callus which formed on the tips of young shoots of a Mentha hybrid (M. arvenis × M. spicata). Changes in growth parameters during a culture cycle were recorded. The general appearance of cells during division and growth, including the changes in cell form, was also represented.Suspension-cultured cells of Mentha hybrid released a large amount of extracellular polysaccharides (ECP) mainly at the logarithmic phase of the growth cycle. The ECP contained galacturonic acid as major components and arabinose, galactose, glucose, xylose, rhamnose and mannose as minor components. The ratio of the uronic acid content to total sugar content in the ECP was below 40% at day 7, but increased up to 90% at day 21. The relative contents of xylose and glucose in the ECP decreased during the culture period, while the arabinose content increased and those of rhamnose, mannose and galactose remained constant.The IR spectrum suggested that the ECP were low-methoxylated pectic polysaccharides. The presence of lignin and related compounds in the ECP was not detected. The protein content of the ECP was about 10% and the main amino acids were alanine, proline, hydroxyproline, valine, asparticacid and serine, in that order.     

Heavy metals in some Chinese herbal plants

The concentrations of nine heavy metals, cadmium, cobalt, copper, iron, manganese, nickel, lead, zinc and mercury in 42 Chinese herbal medicinal plants were determined. Generally, all the samples studied had, relative to the other trace metals, higher concentrations of iron, manganese, and zinc. The concentration range of the metals determined was comparable to that in many of the East Asian vegetables and fruits. A few samples were found to contain relatively higher concentrations of the toxic metals such as cadmium, lead, and mercury. This was probably caused by contamination during air-drying and preservation.     

中国瑟姬小蜂及二新种的描述（膜翅目：姬小蜂科）

瑟姬小蜂属Cirrospilus昆虫是鳞翅目,双翅目,特别是细蛾,潜叶蛾,潜叶蝇类及其他荫蔽性小幼虫或蛹的重要寄生蜂,有些也能重寄生于绒茧蜂和蜘蛛卵等中,本文除二新种描述外,还收入瑟姬小蜂六种。一并列于检索表中。     

Mother-infant bonding

A study of the research on postpartum mother-infant bonding shows that results from poorly constructed research programs were published in major journals and became a part of hospital policy because the bonding concept was politically useful in the struggle between advocates of natural childbirth and managers of the medical model of birth. The concept was also uncritically accepted because it was consistent with a longstanding ideology of motherhood that sees women as the prime architects of their children’s personalities. Diane Eyer earned her Ph.D. in developmental psychology from the University of Pennsylvania. She is currently writing a book on the ways in which the concepts of bonding and attachment have affected our understanding of appropriate early childcare.     

Long-term changes in Noctiluca scintillans blooms along the Chinese coast from 1933 to 2020

Noctiluca scintillans is one of the most common harmful algal species and widely known due to its bioluminescence. In this study, the spatial distribution, seasonal variations, and long-term trends of N. scintillans blooms in China and the related drivers were analyzed and discussed. From 1933 to 2020, a total of 265 events of N. scintillans blooms were recorded in Chinese coastal waters, with a total duration of 1052 days. The first N. scintillans bloom occurred in Zhejiang in 1933, and only three events were recorded before 1980. From 1981 to 2020, N. scintillans caused harmful algal blooms (HABs) almost every year, both the average duration and the proportion of multiphase HABs showed an increasing trend. 1986–1992, 2002–2004, and 2009–2016 were the three peak periods with a frequency of no less than five events of N. scintillans blooms per year. In terms of spatial distribution, N. scintillans blooms spread from the Southeast China Sea to the Bohai Sea after 2000, Guangdong, Fujian, and Hebei were the three provinces with the highest numbers of recorded events of N. scintillans blooms. Moreover, 86.8% of the events of N. scintillans blooms occurred in spring (March, April, and May) and summer (June, July, and August). Among environmental factors, the dissolved inorganic phosphate, dissolved silicate and chemical oxygen demand were significantly correlated with the cell density of N. scintillans during N. scintillans blooms, and most of N. scintillans blooms were recorded in the temperature range of 18.0–25.0°C. Precipitation, hydrodynamics, water temperature, and food availability might be the main factors affecting the spatial–temporal distribution of N. scintillans blooms along the Chinese coast.     

Combining industrial ecology tools to assess potential greenhouse gas reductions of a circular economy: Method development and application to Switzerland

Industrial ecology (IE) methodologies, such as input/output or material flow analysis and life cycle assessment (LCA), are often used for the environmental evaluation of circular economy strategies. Up to now, an approach that utilizes these methods in a systematic, integrated framework for a holistic assessment of a geographic region's sustainable circular economy potential has been lacking. The approach developed in this study (IE4CE approach) combines IE methodologies to determine the environmental impact mitigation potential of circular economy strategies for a defined geographic region. The approach foresees five steps. First, input/output analysis helps identify sectors with high environmental impacts. Second, a refined analysis is conducted using material flow and LCA. In step 3, circular strategies are used for scenario design and evaluated in step 4. In step 5, the assessment results are compiled and compared across sectors. The approach was applied to a case study of Switzerland, analyzing 8 sectors and more than 30 scenarios in depth. Carbon capture and storage (CCS) from waste incineration, biogas and cement production, food waste prevention in households, hospitality and production, and the increased recycling of plastics had the highest mitigation potential. Most of the scenarios do not influence each other. One exception is the CCS scenarios: waste avoidance scenarios decrease the reduction potential of CCS. A combination of scenarios from different sectors, including their impact on the CCS scenario potential, led to an environmental impact mitigation potential of 11.9 Mt CO₂-eq for 2050, which equals 14% of Switzerland's current consumption-based impacts.     

A review of methods to trace material flows into final products in dynamic material flow analysis: From industry shipments in physical units to monetary input–output tables,Part 1

Dynamic material flow analysis (dMFA) is widely used to model stock-flow dynamics. To appropriately represent material lifetimes, recycling potentials, and service provision, dMFA requires data about the allocation of economy-wide material consumption to different end-use products or sectors, that is, the different product stocks, in which material consumption accumulates. Previous estimates of this allocation only cover few years, countries, and product groups. Recently, several new methods for estimating end-use product allocation in dMFA were proposed, which so far lack systematic comparison. We review and systematize five methods for tracing material consumption into end-use products in inflow-driven dMFA and discuss their strengths and limitations. Widely used data on industry shipments in physical units have low spatio-temporal coverage, which limits their applicability across countries and years. Monetary input–output tables (MIOTs) are widely available and their economy-wide coverage makes them a valuable source to approximate material end-uses. We find four distinct MIOT-based methods: consumption-based, waste input–output MFA (WIO-MFA), Ghosh absorbing Markov chain, and partial Ghosh. We show that when applied to a given MIOT, the methods’ underlying input–output models yield the same results, with the exception of the partial Ghosh method, which involves simplifications. For practical applications, the MIOT system boundary must be aligned to those of dMFA, which involves the removal of service flows, sector (dis)aggregation, and re-defining specific intermediate outputs as final demand. Theoretically, WIO-MFA, applied to a modified MIOT, produces the most accurate results as it excludes massless and waste transactions. In part 2 of this work, we compare methods empirically and suggest improvements for aligning MIOT-dMFA system boundaries.     

Histological Techniques to Improve Testing of Pulpal Response of Teeth to Filling Material

Two fixation fluids, two fixation techniques and two embedding methods were investigated for their effects on the quality of sections of teeth for pulpal response to filling materials to improve evaluation of pulpal responses. Sections from 32 baboon teeth were prepared, half with experimental cavities and half without, using either 10% formaldehyde or 4% glutaraldehyde, longitudinal tooth splitting or removal of the tooth apex, and paraffin or K plast resin embedding; decalcification in a formic acid mixture was a constant throughout. Histometric analysis showed that paraffin embedding produced less shrinkage than the K Plast resin embedding although the difference was not statistically significant. Six parameters of separation at the pu1p:dentine interface were studied: embedding, fixative, presence or absence of a cavity, cutting technique and individual animal tooth type. Statistical investigation revealed that fixative, cutting technique, and fixative and cutting technique combined had significant influences on the separation artifact. Of the combinations tested the choice of embedding method depends on which of the two artifacts, shrinkage or separation, is more adverse in the opinion of the investigator. Four percent glutaraldehyde together with the longitudinal split technique of fixation. processed by either K Plast resin embedding or paraffin embedding produced satisfactory pulpal sections.     

The complex genome and adaptive evolution of polyploid Chinese pepper (Zanthoxylum armatum and Zanthoxylum bungeanum)

Zanthoxylum armatum and Zanthoxylum bungeanum, known as ‘Chinese pepper’, are distinguished by their extraordinary complex genomes, phenotypic innovation of adaptive evolution and species-special metabolites. Here, we report reference-grade genomes of Z. armatum and Z. bungeanum. Using high coverage sequence data and comprehensive assembly strategies, we derived 66 pseudochromosomes comprising 33 homologous phased groups of two subgenomes, including autotetraploid Z. armatum. The genomic rearrangements and two whole-genome duplications created large (~4.5 Gb) complex genomes with a high ratio of repetitive sequences (>82%) and high chromosome number (2n = 4x = 132). Further analysis of the high-quality genomes shed lights on the genomic basis of involutional reproduction, allomones biosynthesis and adaptive evolution in Chinese pepper, revealing a high consistent relationship between genomic evolution, environmental factors and phenotypic innovation. Our study provides genomic resources and new insights for investigating diversification and phenotypic innovation in Chinese pepper, with broader implications for the protection of plants under severe environmental changes.