天山一号冰川表面冰尘和底部沉积层中可培养酵母菌系统发育类群的分布及生态生理特征

【目的】揭示乌鲁木齐河源天山1号冰川表面冰尘(CS)和底部沉积层(DS)可培养酵母菌系统发育类群及其结构组成差异,分析低温酵母菌代表菌株之间的生态、生理生化特性。【方法】利用4种培养基分离天山1号冰川可培养酵母菌,采用ITS基因序列分析确定菌种的系统进化地位。对分离菌株的最适生长温度、耐盐性和产酶等生态、生理学特性进行分析。【结果】从冰尘和底部沉积层中共分离出152株酵母菌菌株,通过ITSrRNA基因序列的NCBI比对和Rep-PCR指纹分型,结果表明酵母菌类群包括担子菌门(Basidiomycota)和子囊菌(Ascomycota),分属于14个属26种,其中担子菌门柄锈菌亚门(Pucciniomycotina)88株、伞菌亚门(Agariomycotina)24株,子囊菌门40株,冰川广布酵母菌Vishniacozyma victoriae为优势菌株(占比21.84%)。17种酵母的最适生长温度为15°C、2种为10°C、6种为20°C。25株代表酵母菌株产酶分析显示,产脂肪酶、淀粉酶、蛋白酶菌株分别为11株、11株、5株,6株3种酶都不产。【结论】天山1号冰川冰尘及底部沉积层可培养低温酵母系统发育类群结构存在差异,产低温酶活性高、稳定性好,为今后冰川低温酵母菌的研究提供有价值的数据支持。     

中国西藏发现类三角蚌类祖先闯入非海相领域的证据（英文）北大核心CSCD

新发现的双壳类化石命名为Baxoitrigonia baxoiensis gen. et sp. nov.,产地为藏东八宿林卡家东,化石产于景星动物群之下的拉贡塘组下段,同层位有菊石和其他海相双壳类,时代为晚侏罗世Tithonian期;化石的外部特征很接近于三角蛤类Iotrigonia属,但前闭肌痕特征又相似于类三角蚌类,被认为是三角蛤类闯入非海相领域后演变成类三角蚌类的产物。此发现提供了生物和地层两方面的直接证据,证明非海相类三角蚌类(Trigonioidoidea超科)起源于海相三角蛤类(Trigoniida目),而不是起源于珠蚌类(Unionida目)。海相三角蛤类闯入边缘隔绝的洛隆-八宿地区并演变为非海相类三角蚌类,是一次典型的边域成种事件。     

Cover Image,Volume 116, Number 2, February 2019

A key point of protein stability engineering is to identify specific target residues whose mutations can stabilize the protein structure without negatively affecting the function or activity of the protein. Here, we propose a method called RiSLnet (Rapid i dentification of Smart mutant Library using residue network) to identify such residues by combining network analysis for protein residue interactions, identification of conserved residues, and evaluation of relative solvent accessibility. To validate its performance, the method was applied to four proteins, that is, T4 lysozyme, ribonuclease H, barnase, and cold shock protein B. Our method predicted beneficial mutations in thermal stability with ~62% average accuracy when the thermal stability of the mutants was compared with the ones in the Protherm database. It was further applied to lysine decarboxylase (CadA) to experimentally confirm its accuracy and effectiveness. RiSLnet identified mutations increasing the thermal stability of CadA with the accuracy of ~60% and significantly reduced the number of candidate residues (~99%) for mutation. Finally, combinatorial mutations designed by RiSLnet and in silico saturation mutagenesis yielded a thermally stable triple mutant with the half-life (T _1/2) of 114.9 min at 58°C, which is approximately twofold higher than that of the wild-type.     

Reconstruction of tricarboxylic acid cycle in Corynebacterium glutamicum with a genome-scale metabolic network model for trans-4-hydroxyproline production

trans-4-Hydroxy- l -proline (Hyp) is an abundant component of mammalian collagen and functions as a chiral synthon for the syntheses of anti-inflammatory drugs in the pharmaceutical industry. Proline 4-hydroxylase (P4H) can catalyze the conversion of l -proline to Hyp; however, it is still challenging for the fermentative production of Hyp from glucose using P4H due to the low yield and productivity. Here, we report the metabolic engineering of Corynebacterium glutamicum for the fermentative production of Hyp by reconstructing tricarboxylic acid (TCA) cycle together with heterologously expressing the p4h gene from Dactylosporangium sp. strain RH1. In silico model-based simulation showed that α-ketoglutarate was redirected from the TCA cycle toward Hyp synthetic pathway driven by P4H when the carbon flux from succinyl-CoA to succinate descended to zero. The interruption of the TCA cycle by the deletion of sucCD-encoding the succinyl-CoA synthetase (SUCOAS) led to a 60% increase in Hyp production and had no obvious impact on the growth rate. Fine-tuning of plasmid-borne ProB* and P4H abundances led to a significant increase in the yield of Hyp on glucose. The final engineered Hyp-7 strain produced up to 21.72 g/L Hyp with a yield of 0.27 mol/mol (Hyp/glucose) and a volumetric productivity of 0.36 g·L ⁻¹·hr ⁻¹ in the shake flask fermentation. To our knowledge, this is the highest yield and productivity achieved by microbial fermentation in a glucose-minimal medium for Hyp production. This strategy provides new insights into engineering C. glutamicum by flux coupling for the fermentative production of Hyp and related products.     

Stabilization and scale-up of photosynthesis-driven ω-hydroxylation of nonanoic acid methyl ester by two-liquid phase whole-cell biocatalysis

Photoautotrophic organisms are promising hosts for biocatalytic oxyfunctionalizations because they supply reduction equivalents as well as O₂ via photosynthetic water oxidation. Thus far, research on photosynthesis-driven bioprocesses mainly focuses on strain development and the proof of principle in small-scale biocatalytic reaction setups. This study investigates the long-term applicability of the previously developed cyanobacterial strain Synechocystis sp. PCC 6803_BGT harboring the alkane monooxygenase system AlkBGT catalyzing terminal alkyl group oxyfunctionalization. For the regiospecific ω-hydroxylation of nonanoic acid methyl ester (NAME), this biocatalyst showed light intensity-independent hydroxylation activity and substantial hydrolysis of NAME to nonanoic acid. Substrate mass transfer limitation, substrate hydrolysis, as well as reactant toxicity were overcome via in situ substrate supply by means of a two-liquid phase system. The application of diisononyl phthalate as organic carrier solvent enabled 1.7-fold increased initial specific activities (5.6 ± 0.1 U/g_CDW) and 7.6-fold increased specific yields on biomass (3.8 ± 0.1 mmol_H-NAME/g_CDW) as compared with single aqueous phase biotransformations. Finally, the whole-cell biotransformation system was successfully scaled from glass tubes to a stirred-tank photobioreactor. This is the first study reporting the application of the two-liquid phase concept for efficient phototrophic whole-cell biocatalysis.     

Control of IgG glycosylation by in situ and real-time estimation of specific growth rate of CHO cells cultured in bioreactor

The cell-specific growth rate (µ) is a critical process parameter for antibody production processes performed by animal cell cultures, as it describes the cell growth and reflects the cell physiological state. When there are changes in these parameters, which are indicated by variations of µ, the synthesis and the quality of antibodies are often affected. Therefore, it is essential to monitor and control the variations of µto assure the antibody production and achieve high product quality. In this study, a novel approach for on-line estimation of µ was developed based on the process analytical technology initiative by using an in situ dielectric spectroscopy. Critical moments, such as significant µ decreases, were successfully detected by this method, in association with changes in cell physiology as well as with an accumulation of nonglycosylated antibodies. Thus, this method was used to perform medium renewals at the appropriate time points, maintaining the values of µ close to its maximum. Using this method, we demonstrated that the physiological state of cells remained stable, the quantity and the glycosylation quality of antibodies were assured at the same time, leading to better process performances compared with the reference feed-harvest cell cultures carried out by using off-line nutrient measurements.     

Hyperglycemia differentially affects proliferation,apoptosis, and BNIP3 and p53 mRNA expression of human umbilical cord Wharton's jelly cells from non-diabetic and diabetic pregnancies

Diabetes in pregnancy constitutes an unfavorable environment for embryonic and fetal development, where the child has a higher risk of perinatal morbidity and mortality, with high incidence of congenital malformations and predisposition to long-term metabolic diseases that increase with a hypercaloric diet. To analyze whether hyperglycemia differentially affects proliferation, apoptosis, and mRNA expression in cells from children of normoglycemic pregnancies (NGPs) and diabetes mellitus pregnancies (DMPs), we used umbilical cord Wharton jelly cells as a research model. Proliferation assays were performed to analyze growth and determine the doubling time, and the rate of apoptosis was determined by flow cytometry-annexin-V assays. AMPK, BNIP3, HIF1α, and p53 mRNA gene expression was assessed by semi-quantitative RT-PCR. We found that hyperglycemia decreased proliferation in a statistically significant manner in NGP cells treated with 40?mM D-glucose and in DMP cells treated with 30 and 40?mM D-glucose. Apoptosis increased in hyperglycemic conditions in NGP and DMP cells. mRNA expression of BNIP3 and p53 was significantly increased in cells from DMPs but not in cells from NGPs. We found evidence that maternal irregular metabolic conditions, like diabetes with hyperglycemia in culture, affect biological properties of fetal cells. These observations could be a constituent of fetal programming.     

Identification of 10-dehydrooxyglycyuralin E as a selective human estrogen receptor alpha partial agonist

Selective estrogen receptor modulators (SERMs) act as either agonist or antagonist of estrogen receptor (ER) in a tissue selective manner and have been used in several diseases such as breast cancer, postmenopausal syndrome, osteoporosis, and cardiovascular diseases. However, current SERMs may also increase the risk of serious side effects and trigger drug resistance. Herein, a screening program, that was designed to search for novel SERMs, resulted in the identification of a series of 2-arylbenzofuran-containing compounds that are ligands for ERα, when applying the Gaussia-luciferase reporter assay. One of these compounds, 10-dehydrooxyglycyuralin E (T9) was chemically synthesized. T9 showed anti-estrogenic/proliferative activity in ERα-positive breast cancer cells. Pretreatment of T9 prevented the mRNA expression of GREB1, which is an estrogen response gene. Furthermore, by an in silico docking simulation study we demonstrated that T9 showed interactions directly to ERα. Taken together, these results demonstrated that T9 is a candidate of SERMs and a useful seed compound for the foundation of the selective activity of SERMs.     

Systematic Modeling Approach to Selective Plugging Using In Situ Bacterial Biopolymer Production and Its Potential for Microbial-enhanced Oil Recovery

This study presents a systematic modeling approach for examining the efficiency of the MEOR process based on in situ selective plugging by bacterial biopolymer production and optimization of the nutrient injection strategy to yield the maximum oil recovery. This study focuses on modeling in situ selective plugging by the bacterial biopolymer dextran that is generated by Leuconostoc mesenteroides. Bacterial growth and dextran generation were described by a stoichiometric equation and kinetic reactions using batch model simulation. Based on the parameters for permeability reduction obtained from the sandpack model, the MEOR process was implemented in a pilot-scale system that included a highly permeable thief zone in a low-permeability reservoir. The base MEOR design yielded a 61.5% improvement of the recovery factor compared to that obtained with waterflooding. The parametric simulations revealed that the recovery efficiency was influenced by the amount of dextran, as well as the distribution of dextran, and thus, the injection strategy is critical for controlling the dextran distribution. By incorporating the results from the sensitivity analysis and optimization to determine the optimal design parameters, a 36.7% improvement of the oil recovery was achieved with the optimized MEOR process in comparison with the base case.     

Proposal of 28 GHz In Vitro Exposure System Based on Field Uniformity for Three‐Dimensional Cell Culture Experiments

This paper proposes a novel in vitro exposure system operating at millimeter‐wave (mmWave) 28 GHz, one of the frequency bands under consideration for fifth generation (5G) communication. We employed the field uniformity concept along cross‐sectional observation planes at shorter distances from the radiation antenna for better efficiency and a small‐size system. A choke‐ring antenna was designed for this purpose in consideration of a wider beamwidth (BW) and a symmetric far‐field pattern across three principal planes. The permittivity of Dulbecco's modified Eagle's medium solution was measured to examine the specific absorption rate (SAR) of the skin cell layer inside a Petri dish model for a three‐dimensional (3D) cell culture in vitro experiment. The best deployment of Petri dishes, taking into account a geometrical field symmetry, was proposed. Local SAR values within the cell layer among the Petri dishes were determined with different polarization angles. It was determined that this polarization effect should be considered when the actual exposure and deployment were conducted. We finally proposed an in vitro exposure system based on the field uniformity including downward exposure from an antenna for 3D cell culture experiments. A small‐size chamber system was obtained, and the size was estimated using the planar near‐field chamber design rule. Bioelectromagnetics. 2019;40:445–457. © 2019 Bioelectromagnetics Society