Isolation of a singly oxo-bridged Fe(III) dinuclear complex: Synthesis, crystal structure, spectroscopic and magnetic studies

The μ-oxo dinuclear complex {Fe₂O(tptz)₂[N(CN)₂]₂(NO₃)₂} (1) (where tptz = 2,4,6-tris(2-pyridyl)-1,3,5-triazine) has been synthesised and characterised by elemental analysis, FT-IR, UV-vis, cyclic voltammetry, Mössbauer spectroscopy, and variable-temperature magnetic susceptibility measurements and single crystal X-ray diffraction. The iron centres have a pentagonal-bipyramidal geometry. The dimeric neutral complex exhibits typical Fe-μ-O bond lengths of 1.763(1) Å and a bridge angle of 180.00°. The Fe?Fe separation is 3.526(3) Å. The Mössbauer spectrum at room temperature consists of one quadrupole doublet with an isomer shift of 0.41 mm/s and a quadrupole splitting of 1.12 mm/s. Variable-temperature magnetic susceptibility measurements have been measured in the temperature range 300-2 K, revealing an intramolecular antiferromagnetic coupling (J = −211.6 cm⁻¹).     

Sulfide oxidation with H2O2 catalyzed by manganese complex of N,N′,N″-tris(2-hydroxypropyl)-1,4,7-triazacyclononane

[MnL](ClO₄)₂ (L = N,N′,N″-tris(2-hydroxypropyl)-1,4,7-triazacyclononane) has been tested for catalyzing sulfide oxidation. In the presence of this complex, ethyl phenyl sulfide, butyl sulfide and phenyl sulfide are completely oxidized to the corresponding sulfoxides and sulfones with H₂O₂ as the oxidant. 2-Chloroethyl phenyl sulfide oxidation yield 2-chloroethyl phenyl sulfone and phenyl vinyl sulfone. In ethyl phenyl sulfide oxidation, effects of complex and H₂O₂ concentration and temperature on the reaction rate have been discussed. Through controlling reaction conditions, ethyl phenyl sulfoxide and ethyl phenyl sulfone may be produced selectively. The UV–Vis and electron paramagnetic resonance (EPR) studies on catalyst solution indicate that metal centre of the complex is transformed from Mn(II) to Mn(IV) after the addition of H₂O₂. At 25 °C, rate constant for ethyl phenyl sulfide oxidation is 4.38 × 10⁻³ min⁻¹.     

An antiferromagnetically coupled trinuclear Cu(II) complex containing μ(O,O′), μ(O) carboxylates and μ(O) phenoxide bridges

The trinuclear complex [L₂Cu₃(CF₃CO₂)₄] (1) has been synthesized and its crystal structure determined. It consists of a linear arrangement of Cu(II) centers. The central copper atom is bonded to six oxygen atoms and has a tetragonally distorted octahedral geometry, while the terminal copper atoms are bonded to three oxygen and two nitrogen atoms and show a distorted square pyramidal geometry. The complex shows di-μ(O,O′) syn-syn carboxylate bridging as well as monoatomic (μ-O) bridging, along with phenolate (μ-O) oxygen bridging. Cryomagnetic investigations in the range 2-300 K revealed an antiferromagnetic spin exchange interaction with J = −95.7 cm⁻¹, based on the isotropic exchange model H_ex = −2J[S₁ · S₂ + S₂ · S₃].     

One-dimensional coordination polymer and its hydrogen bonded 2D network generated from dimeric Ag(I) building units

A new dimeric silver(I) complex [Ag(PhPPy₂)(CH₃CN)]₂(ClO₄)₂ (1) (PhPPy₂ = bis(2-pyridyl)phenylphosphine) was synthesized by a direct reaction of [Ag(CH₃CN)₄]ClO₄ with ligand PhPPy₂. X-ray crystallographical studies revealed that in 1, two silver atoms are bridged by two PhPPy₂ ligands and bonded to each other. Each Ag(I) adopts a distorted trigonally bi-pyramidal geometry, and axially coordinated acetonitrile molecules are collinear with two silver atoms. By using 1 as a building block precursor, a 1D coordination polymer, [Ag₂(PhPPy₂)₂(1,3,5-C₆H₃(CO₂)₂(CO₂H))]_∞ (2) was prepared by replacing axially coordinated acetonitrile molecules in 1 with two carboxylate groups of a bridging ligand, 1,3,5-benzenetricarboxylate. In solid state, linear polymeric chains are oriented parallel to each other and interestingly interact by hydrogen bonding through their carboxylic/carboxylate groups to construct a novel wave-shaped 2D network. Both 1 and 2 exhibit similar photoluminescent properties in solid state at room temperature.     

Reactions of alkyl and aryl sulfides with a monocarbon platinacarbaborane anion

The reaction of the monocarbon carbaborane complex Na[Pt(PEt₃)₂(η⁵-CB₁₀H₁₁)] with some diaryl- and dialkyl disulfides has been investigated. With Ph₂S₂, two new cage substituted products are formed, [Pt(SPh)(PEt₃)(η⁵-9-SPh-7-CB₁₀H₁₀)] (1) and [Pt(SPh)(PEt₃)(η⁵-8-SPh-11-SPh-7-CB₁₀H₉)] (2), whereas with S₂ the main product is the metal substituted complex, [Pt(SBu^t)(PEt₃)(η⁵-7-CB₁₀H₁₁)] (4). All three new molecules have been identified spectroscopically (¹H, ¹³C, ³¹P, ¹¹B NMR) and through single crystal X-ray diffraction.     

Population genetics and phylogeography of sea turtles

The seven species of sea turtles occupy a diversity of niches, and have a history tracing back over 100 million years, yet all share basic life-history features, including exceptional navigation skills and periodic migrations from feeding to breeding habitats. Here, we review the biogeographic, behavioural, and ecological factors that shape the distribution of genetic diversity in sea turtles. Natal homing, wherein turtles return to their region of origin for mating and nesting, has been demonstrated with mtDNA sequences. These maternally inherited markers show strong population structure among nesting colonies while nuclear loci reveal a contrasting pattern of male-mediated gene flow, a phenomenon termed 'complex population structure'. Mixed-stock analyses indicate that multiple nesting colonies can contribute to feeding aggregates, such that exploitation of turtles in these habitats can reduce breeding populations across the region. The mtDNA data also demonstrate migrations across entire ocean basins, some of the longest movements of marine vertebrates. Multiple paternity occurs at reported rates of 0-100%, and can vary by as much as 9-100% within species. Hybridization in almost every combination among members of the Cheloniidae has been documented but the frequency and ultimate ramifications of hybridization are not clear. The global phylogeography of sea turtles reveals a gradient based on habitat preference and thermal regime. The cold-tolerant leatherback turtle (Dermochelys coriacea) shows no evolutionary partitions between Indo-Pacific and Atlantic populations, while the tropical green (Chelonia mydas), hawksbill (Eretmochelys imbricata), and ridleys (Lepidochelys olivacea vs. L. kempi) have ancient separations between oceans. Ridleys and loggerhead (Caretta caretta) also show more recent colonization between ocean basins, probably mediated by warm-water gyres that occasionally traverse the frigid upwelling zone in southern Africa. These rare events may be sufficient to prevent allopatric speciation under contemporary geographic and climatic conditions. Genetic studies have advanced our understanding of marine turtle biology and evolution, but significant gaps persist and provide challenges for the next generation of sea turtle geneticists.     

Biological solutions to transport network design

Transport networks are vital components of multicellular organisms, distributing nutrients and removing waste products. Animal and plant transport systems are branching trees whose architecture is linked to universal scaling laws in these organisms. In contrast, many fungi form reticulated mycelia via the branching and fusion of thread-like hyphae that continuously adapt to the environment. Fungal networks have evolved to explore and exploit a patchy environment, rather than ramify through a three-dimensional organism. However, there has been no explicit analysis of the network structures formed, their dynamic behaviour nor how either impact on their ecological function. Using the woodland saprotroph Phanerochaete velutina, we show that fungal networks can display both high transport capacity and robustness to damage. These properties are enhanced as the network grows, while the relative cost of building the network decreases. Thus, mycelia achieve the seemingly competing goals of efficient transport and robustness, with decreasing relative investment, by selective reinforcement and recycling of transport pathways. Fungal networks demonstrate that indeterminate, decentralized systems can yield highly adaptive networks. Understanding how these relatively simple organisms have found effective transport networks through a process of natural selection may inform the design of man-made networks.     

Arabidopsis GCP2 and GCP3 are part of a soluble gamma-tubulin complex and have nuclear envelope targeting domains

In higher plants, microtubules (MTs) are assembled in distinctive arrays in the absence of a defined organizing center. Three MT nucleation sites have been described: the nuclear surface, the cell cortex and cortical MT branch points. The Arabidopsis thaliana (At) genome contains putative orthologues encoding all the components of characterized mammalian nucleation complexes: gamma-tubulin and gamma-tubulin complex proteins GCP2 to GCP6. We have cloned the cDNA encoding AtGCP2, and show that gamma-tubulin, AtGCP2 and AtGCP3 are part of the same tandem affinity-purified complex and are present in a large membrane-associated complex. In addition, small soluble gamma-tubulin complexes of the size expected for a gamma-tubulin core complex are recruited to isolated nuclei. Using immunogold labelling, AtGCP3 is localized to both the nuclear envelope (NE) and the plasma membrane. To identify domains that could play a role in targeting complexes to these nucleation sites, truncated AtGCP2- and AtGCP3-green fluorescent protein fusion proteins were expressed in BY-2 cells. Several domains from AtGCP2 and AtGCP3 are capable of targeting fusions to the NE. We propose that regulated recruitment of soluble gamma-tubulin-containing complexes is responsible for nucleation at dispersed sites in plant cells and contributes to the formation and organization of the various MT arrays.     

MRN复合物的结构及功能研究进展

MRN复合物包括MRE11、NBS1、RAD50,此复合物中的MRE11或NBS1缺失或突变会导致人的共济失调一毛细血管扩张样疾病、Nijmegen断裂综合征。MRN复合物在DNA双链损伤修复、同源重组、非同源重组、端粒长度维持、细胞检验点激活、保证DNA复制的顺利进行,以及维持基因组的稳定性等方面都起到了重要的作用。从以上几个方面简要综述MRN复合物的研究进展。     

Zinc tetraaminophthalocyanine-Fe3O4 nanoparticle composite for laccase immobilization

Zinc tetraaminophthalocyanine-Fe3O4 nanoparticle composites were prepared by organic-inorganic complex technology and characterized. It has been proved that the ZnTAPc dispersed randomly onto the surface of Fe3O4 nanoparticles to form molecular dispersion layer and there was a relatively strong bond between central zinc cation and oxygen. The nanoparticle composite took the shape of roundish spheres with the mean diameter of about 15 nm. Active amino groups of magnetic carriers could be used to bind laccase via glutaraldehyde. The optimal pH for the activity of the immobilized laccases and free laccase were the same at pH 3.0 and the optimal temperature for laccase immobilization on ZnTAPc-Fe3O4 nanoparticle composite was 45 degrees. The immobilization yields and K(m) value of the laccase immobilized on ZnTAPc-Fe3O4 nanoparticle composite were 25% and 20.1 microM, respectively. This kind of immobilized laccase has good thermal, storage and operation stability, and could be used as the sensing biocomponent for the fiber optic biosensor based on enzyme catalysis.