A Method for Making Aceto-Carmin Smears Permanent

Anthers are collected and placed in a solution of 1 part acetic acid to 3 parts of absolute alcohol. The contents of the anther are squeezed out on a slide in a drop of Belling's iron-aceto-carmin solution and a cover glass placed over the drop. Care should be taken to remove all anther walls and flower parts. Heat the slide over an alcohol flame for a second, repeating 4 or 5 times. Place the slide in a petri dish filled with a 10% solution of acetic acid. When the cover glass has risen away from the slide gently remove the cover glass and place in a Coplin jar containing equal parts of alcohol and acetic acid. Likewise, place the slide in this solution. Run both cover and slide thru the following solutions: 1 part acetic acid to 3 parts absolute alcohol, 1 part acetic acid to 9 parts absolute alcohol, absolute alcohol and finally equal parts of absolute alcohol and xylol. Recombine the cover and slide in xylol-balsam directly from this solution.     

The differential contributions of herkogamy and dichogamy as mechanisms of avoiding self‐interference in four self‐incompatible Epimedium species

Self‐interference is one of the most important selective forces in shaping floral evolution. Herkogamy and dichogamy both can achieve reductions in the extent of self‐interference, but they may have different roles in minimizing self‐interference in a single species. We used four self‐incompatible Epimedium species to explore the roles of herkogamy and dichogamy in avoiding self‐interference and to test the hypothesis that herkogamy and dichogamy may be separated and become selected preferentially in the taxa. Two species (E. franchetii and E. mikinorii) expressed strong herkogamy and weak protogyny (adichogamy), whereas another two species (E. sutchuenense and E. leptorrhizum) expressed slight herkogamy and partial protandry. Field investigations indicated that there was no physical self‐interference between male function and female function regarding pollen removal and pollen deposition in all species. Self‐pollination (autonomous or facilitated) was greater in species with slight herkogamy than in those with strong herkogamy. Artificial pollination treatments revealed that self‐pollination could reduce outcrossed female fertility in all species, and we found evidence that self‐interference reduced seed set in E. sutchuenense and E. leptorrhizum in the field, but not in E. franchetii and E. mikinorii. These results indicate that well‐developed herkogamy is more effective compared with dichogamy in avoiding self‐interference in the four species. In genus Epimedium, herkogamy instead of dichogamy should be selected preferentially and evolved as an effective mechanism for avoiding self‐interference and might not need to evolve linked with dichogamy.     

The endangered Iris atropurpurea (Iridaceae) in Israel: honey-bees,night-sheltering male bees and female solitary bees as pollinators

Background and Aims

The coastal plain of Israel hosts the last few remaining populations of the endemic Iris atropurpurea (Iridaceae), a Red List species of high conservation priority. The flowers offer no nectar reward. Here the role of night-sheltering male solitary bees, honey-bees and female solitary bees as pollinators of I. atropurpurea is documented.

Methods

Breeding system, floral longevity, stigma receptivity, visitation rates, pollen loads, pollen deposition and removal and fruit- and seed-set were investigated.

Key Results

The main wild pollinators of this plant are male eucerine bees, and to a lesser extent, but with the potential to transfer pollen, female solitary bees. Honey-bees were found to be frequent diurnal visitors; they removed large quantities of pollen and were as effective as male sheltering bees at pollinating this species. The low density of pollen carried by male solitary bees was attributed to grooming activities, pollen displacement when bees aggregated together in flowers and pollen depletion by honey-bees. In the population free of honey-bee hives, male bees carried significantly more pollen grains on their bodies. Results from pollen analysis and pollen deposited on stigmas suggest that inadequate pollination may be an important factor limiting fruit-set. In the presence of honey-bees, eucerine bees were low removal–low deposition pollinators, whereas honey-bees were high removal–low deposition pollinators, because they removed large amounts into corbiculae and deposited relatively little onto receptive stigmas.

Conclusions

Even though overall, both bee taxa were equally effective pollinators, we suggest that honey-bees have the potential to reduce the amount of pollen available for plant reproduction, and to reduce the amount of resources available to solitary bee communities. The results of this study have potential implications for the conservation of this highly endangered plant species if hives are permitted inside reserves, where the bulk of Oncocyclus iris species are protected.     

Post-construction avian mortality monitoring at Project West Wind

Abstract

Post-construction avifauna investigations were undertaken at Project West Wind, Meridian Energy Limited's 62-turbine wind farm on the Wellington south coast. These investigations were required in accordance with the resource consent conditions to quantify the level of avian mortalities occurring at the wind farm, particularly in regard to New Zealand falcon (Falco novaeseelandiae), kākā (Nestor meridionalis) and kererū (Hemiphaga novaeseelandiae). This is the first comprehensive study at a New Zealand operating wind farm. The methods included three field components necessary to calculate annual estimates of mortalities across the wind farm site: routine turbine searches; carcass detection trials; and carcass removal trials. Results from years 1 and 2 of a three-year programme are presented. To date, mortalities have been recorded for 17 taxa at 18 of the 24 study turbines. There have been no recorded mortalities of falcon, kākā or kererū. Australasian harrier (Circus approximans) has been the species for which the most mortalities have been recorded. Overall estimated annual mortality rates for years 1 and 2 were calculated to be approximately six and five birds per turbine respectively.     

Demonstration of biofilm removal from type 304 stainless steel using pulsed-waveform electropolishing

Abstract

This article describes an electrochemical method to remove bacterial biofilm from a stainless steel (SS) surface using a potential pulse/reverse pulse technique. This technique employs a periodic waveform that consists of anodic and cathodic pulses. The pulses can effectively strip a thin layer of metal off the SS surface, along with the adherent biofilm, in a saline solution. Not only can the pulses effectively remove biofilm from the SS surface, but they also regenerate the original mirror-like shiny surface. The importance of this electrochemical biofilm removal method is its wide applicability for any types of biofilms. That is, instead of directly removing the biofilm, it removes a very thin layer of the metal under the biofilm. Thus, the removal process is independent to the nature of the biofilms. Furthermore, this electrochemical biofilm removal method is rapid (less than 30?s of potential pulse time) and does not require hazardous chemicals.     

The CQ ratio of surface energy components influences adhesion and removal of fouling bacteria

The interaction energy between bacteria and substrata with different surface energies was modelled by the extended DLVO (Derjaguin, Landau, Verwey and Overbeek) theory. The modeling results revealed that the interaction energy has a strong correlation with the CQ (Chen and Qi) ratio, which is defined as the ratio of the Lifshitz–van der Waals (LW) apolar to the electron donor surface energy components of substrata. Both modeling and experimental results with different bacteria including P. fluorescens, Cobetia marina and Vibrio alginolyticus demonstrated that if the LW surface energy of bacteria is larger than that of water, which is the case for most bacteria, the number of adhered bacteria decreases with a decreasing CQ ratio while bacterial removal rate increases with a decreasing CQ ratio. However, if the LW surface energy of bacteria is less than that of water, the opposite results are obtained. The CQ ratio gives a clear direction for the design of anti-biofouling and biofouling-release coatings through surface modification.     

Using enzymes to remove biofilms of bacterial isolates sampled in the food-industry

The aim of this study was to analyze the cleaning efficiency of polysaccharidases and proteolytic enzymes against biofilms of bacterial species found in food industry processing lines and to study enzyme effects on the composition of extracellular polymeric substances (EPS) and biofilm removal in a Clean-in-Place (CIP) procedure. The screening of 7 proteases and polysaccharidases for removal of biofilms of 16 bacterial species was first evaluated using a microtiter plate assay. The alkaline pH buffer removed more biofilm biomass as well as affecting a larger range of bacterial species. The two serine proteases and α-amylase were the most efficient enzymes. Proteolytic enzymes promoted biofilm removal of a larger range of bacterial species than polysaccharidases. Using three isolates derived from two bacterial species widely found in food processing lines (Pseudomonas fluorescens and the Bacillus cereus group), biofilms were developed on stainless steel slides and enzymatic solutions were used to remove the biofilms using CIP procedure. Serine proteases were more efficient in removing cells of Bacillus biofilms than polysaccharidases. However, polysaccharidases were more efficient in removing P. fluorescens biofilms than serine proteases. Solubilization of enzymes with a buffer containing surfactants, and dispersing and chelating agents enhanced the efficiency of polysaccharidases and proteases respectively in removing biofilms of Bacillus and P. fluorescens. A combination of enzymes targeting several components of EPS, surfactants, dispersing and chelating agents would be an efficient alternative to chemical cleaning agents.     

Evaluation of DNA extraction methods from complex phototrophic biofilms

Phototrophic biofilms are used in a variety of biotechnological and industrial processes. Understanding their structure, ie microbial composition, is a necessary step for understanding their function and, ultimately, for the success of their application. DNA analysis methods can be used to obtain information on the taxonomic composition and relative abundance of the biofilm members. The potential bias introduced by DNA extraction methods in the study of the diversity of a complex phototrophic sulfide-oxidizing biofilm was examined. The efficiency of eight different DNA extraction methods combining physical, mechanical and chemical procedures was assessed. Methods were compared in terms of extraction efficiency, measured by DNA quantification, and detectable diversity (16S rRNA genes recovered), evaluated by denaturing gradient gel electrophoresis (DGGE). Significant differences were found in DNA yields ranging from 116 ± 12 to 1893 ± 96 ng of DNA. The different DGGE fingerprints ranged from 7 to 12 bands. Methods including phenol–chloroform extraction after enzymatic lysis resulted in the greatest DNA yields and detectable diversity. Additionally, two methods showing similar yields and retrieved diversity were compared by cloning and sequencing. Clones belonging to members of the Alpha-, Beta- and Gamma- proteobacteria, Bacteroidetes, Cyanobacteria and to the Firmicutes were recovered from both libraries. However, when bead-beating was applied, clones belonging to the Deltaproteobacteria were also recovered, as well as plastid signatures. Phenol–chloroform extraction after bead-beating and enzymatic lysis was therefore considered to be the most suitable method for DNA extraction from such highly diverse phototrophic biofilms.     

Simultaneous biological removal of nitrogen–sulfur–carbon: Recent advances and challenges

Biological removal of carbon, nitrogen and sulfur is drawing increasing research interest in search for an efficient and cost-effective wastewater treatment. While extensive work on separate removal of nitrogen and sulfur is well documented, investigation on simultaneous denitrifying sulfide removal has only been reported recently. Most of the work on denitrifying sulfide removal has been focusing on bioreactor performance, loading and operating conditions. Nonetheless, underlying principles elucidating the biochemical reactions and the mechanisms of the microbial degradation are yet to be established. In addition, unstable denitrifying sulfide removal which is a major operating problem that hinders practical application of the process, is yet to be resolved. This paper provides a review on the state-of-the-art development of simultaneous biological removal of sulfur, nitrogen and carbon. Research on bioreactor operation and performance, reactor configurations, mechanisms and modeling work including the use of mass balance analysis and artificial neural networks is delineated. An in-depth discussion on the microbial community and functional consortium is also provided. Challenges and future work on simultaneous biological removal of nitrogen–sulfur–carbon are also outlined.