Light Harvesting at Oblique Incidence Decoupled from Transmission in Organic Solar Cells Exhibiting 9.8% Efficiency and 50% Visible Light Transparency

For many years, it has been recognized that potential organic photovoltaic cells must be integrated into elements requiring high transparency. In most of such elements, sunlight is likely to be incident at large angles. Here it is demonstrated that light transmission can be largely decoupled from harvesting by optically tailoring an infrared shifted nonfullerene acceptor based organic cell architecture. A 9.67% power conversion efficiency at 50° incidence is achieved together with an average visual transmission above 50% at normal incidence. The deconstruction of a 1D nanophotonic structure is implemented to conclude that just two λ/4 thick layers are essential to reach, for a wide incidence angle range, a higher than 50% efficiency increase relative to the standard configuration reference. In an outdoor measurement of vertically positioned 50% visible transparent cells, it is demonstrated that 9.80% of sunlight energy can be converted into electricity during the course of 1 day.     

Improvement of enzymatic biodiesel production by controlled substrate feeding using silica gel in solvent free system

A silica gel-based substrate feeding system was developed to prevent methanol inhibiting the catalyst during enzymatic biodiesel synthesis. In the system, silica gel swelled upon methanol addition and subsequently released it in a controlled manner to prevent excess methanol affecting the enzyme. Biodiesel was synthesized by the enzymatic transesterification of canola oil with methanol. For this reaction, enzyme loading, methanol/oil molar ratio, silica gel dosage, glycerol content, and methanol feeding method were tested using commercial immobilized enzymes (Novozym 435 and Lipozyme RM IM from Novozymes). The results showed that conversion was highest with controlled substrate feeding rather than direct methanol addition, suggesting that the method developed here can easily prevent enzyme inhibition by limiting methanol concentration to an acceptable level.     

The foliar chemical profile of criollo avocado, Persea americana var. drymifolia (Lauraceae), and its relationship with the incidence of a gall-forming insect, Trioza anceps (Triozidae)

The role of phytochemical diversity in plant defense was studied using the specialist herbivore Trioza anceps Tuthill (avocado gall-forming insect), and the volatile fraction of the foliar chemicals of its host, the creole avocado (Persea americana var. drymifolia (Schect. &; Cham.) Blake). Two hypotheses were tested: a) plant defense is determined by phytochemical diversity, and b) plant defense is determined by single compounds or specific blends of compounds. Simple and multiple regressions and a size and shape analysis (which considers the compounds relative and absolute concentrations within the leaf blend) were used to test these hypotheses. Simple regressions of gall incidence and chemical diversity and the tree origin elevation and latitude were very weak. The linear multiple regression to explain gall incidence with 33 foliar compounds and geographical data produced a model with low predictive power (R² = 0.13). The size and shape analysis showed intraspecific variation in leaf chemical profiles among five tree groups, classified by the number of galls per 10 cm² of leaf. Discriminant analysis separated clearly the tree groups’ chemical profiles through specific compounds. These results suggest that the gall incidence is associated with specific chemical profiles, rather than to high or low foliar phytochemical diversity.     

Renewable and sustainable bioenergies production from palm oil mill effluent (POME): win-win strategies toward better environmental protection

Palm oil industry is one of the leading agricultural industries in Malaysia with average crude palm oil production of more than 13 million tonne per year. However, production of such huge amount of crude palm oil has consequently resulted to even larger amount of palm oil mill effluent (POME). POME is a highly polluting wastewater with high chemical oxygen demand (COD) and biochemical oxygen demand (BOD) in which can caused severe pollution to the environment, typically pollution to water resources. On the other hand, POME was identified as a potential source to generate renewable bioenergies such as biomethane and biohydrogen through anaerobic digestion. In other words, a combination of wastewater treatment and renewable bioenergies production would be an added advantage to the palm oil industry. In line with the world's focus on sustainability concept, such strategy should be implemented immediately to ensure palm oil is produced in an environmental friendly and sustainable manner. This review aims to discuss various technologies to convert POME to biomethane and biohydrogen in a commercial scale. Furthermore, discussion on using POME to culture microalgae for biodiesel and bioethanol production was included in the present paper as a new remedy to utilize POME with a greater beneficial return.     

Heterogeneous solid base nanocatalyst: preparation, characterization and application in biodiesel production

A solid base nanocatalyst was prepared by ZrO₂ loaded with C₄H₄O₆HK and investigated for transesterification of soybean oil with methanol to biodiesel. The obtained nanocatalyst was characterized by means of XRD, FTIR, TEM, TGA, N₂ adsorption-desorption measurements and the Hammett indicator method. TEM photograph showed that the nanocatalyst had granular and porous structures with particle sizes of 10-40 nm. The nanocatalyst had longer lifetime and maintained sustained activity after being used for five cycles. The separate effects of the molar ratio of methanol to oil, reaction temperature, nanocatalyst amount and reaction time were investigated. The experimental results showed that a 16:1 M ratio of methanol to oil, 6.0% catalyst, 60 °C reaction temperature and 2.0 h reaction time gave the best results and the biodiesel yield of 98.03% was achieved. Production of biodiesel has positive impact on the utilization of agricultural and forestry products.     

Ethyl ester production by homogeneous alkaline transesterification: influence of the catalyst

In this work, the process for ethyl ester production is studied using refined sunflower oil, and NaOH, KOH, CH₃ONa, and CH₃OK, as catalysts. In all cases, the reaction is carried out in a single reaction step. The best conversion is obtained when the catalyst is either sodium methoxide or potassium methoxide. We found that during the transesterification with ethanol, soap formation is more important than in the case of methanol. The saponification reaction consumes an important fraction of the catalyst. The amount of catalyst consumed by this reaction is 100% in the case of using hydroxides as catalyst (KOH or NaOH), and 25%, and 28% when using CH₃ONa and CH₃OK as catalysts, respectively. Ethanol increases the catalyst solubility in the oil-ethyl ester phase, thus accelerating the saponification reaction.It is possible to obtain high conversions in a one-step reaction, with a total glycerine concentration close to 0.25%.     

Preliminary investigation on the production of fuels and bio-char from Chlamydomonas reinhardtii biomass residue after bio-hydrogen production

The aim of this work was to investigate the potential conversion of Chlamydomonas reinhardtii biomass harvested after hydrogen production. The spent algal biomass was converted into nitrogen-rich bio-char, biodiesel and pyrolysis oil (bio-oil). The yield of lipids (algal oil), obtained by solvent extraction, was 15 ± 2% w/w_dry-biomass. This oil was converted into biodiesel with a 8.7 ± 1% w/w_dry-biomass yield. The extraction residue was pyrolysed in a fixed bed reactor at 350 °C obtaining bio-char as the principal fraction (44 ± 1% w/w_dry-biomass) and 28 ± 2% w/w_dry-biomass of bio-oil. Pyrolysis fractions were characterized by elemental analysis, while the chemical composition of bio-oil was fully characterized by GC-MS, using various derivatization techniques. Energy outputs resulting from this approach were distributed in hydrogen (40%), biodiesel (12%) and pyrolysis fractions (48%), whereas bio-char was the largest fraction in terms of mass.     

Biodiesel-derived crude glycerol bioconversion to animal feed: a sustainable option for a biodiesel refinery

This study examined the potential of producing an edible fungus, Rhizopus microsporus var. oligosporus, on biodiesel-derived crude glycerol. Prolific fungal growth was observed with a fungal biomass yield of 0.83 ± 0.02 (g biomass increase/g initial biomass) under optimal cultivation conditions (e.g. nonsterile crude glycerol at a concentration of 75% (w/v) with nutrient supplementation and without pH control). The potential of utilizing front-end processed banagrass (Pennisetum purpureum) juice as a source of nutrients for crude glycerol fermentation was evaluated with a 2.3-fold improvement in the fungal biomass yield. The glycerol-derived fungal biomass showed high amounts of threonine, one of the main limiting amino acids in non-ruminant feeds. An inexpensive fungal protein has the potential to reduce meat product prices by lowering the production costs of animal feeds. The application of fungal technology thus provides a unique sustainable option for biodiesel refineries by providing an additional source of revenue from fungal products.     

A novel alkaline lipase from Ralstonia with potential application in biodiesel production

With the aim of isolating a biocatalyst able to catalyze biodiesel production from microbial source, Ralstonia sp. CS274 was isolated and a lipase from the strain (RL74) was purified. Molecular weight of RL74 was estimated to be 28,000 Da by SDS-PAGE. The activity was highest at 50-55 °C and pH 8.0-9.5 and was stable at pH 7.0-12.0 and up to 45 °C. It was resistant to oxidizing and reducing agents and the activity was enhanced by detergents. RL74 was 1,3 specific and K_m and V_max for p-nitrophenyl palmitate were 2.73 ± 0.6 mM and 101.4 ± 1.9 mM/min mg, respectively. N-terminal amino acid sequence showed partial homology with that of Penicillium lipases. RL74 produced biodiesel more efficiently in palm oil than in soybean oil; and the production was highest at pH 8.0, at 5% methanol and at 20% water content.     

Integration of on-farm biodiesel production with anaerobic digestion to maximise energy yield and greenhouse gas savings from process and farm residues

Anaerobic co-digestion of residues from the cold pressing and trans-esterification of oilseed rape (OSR) with other farm wastes was considered as a means of enhancing the sustainability of on-farm biodiesel production. The study verified the process energy yields using biochemical methane potential (BMP) tests and semi-continuous digestion trials. The results indicated that high proportions of OSR cake in the feedstock led to a decrease in volatile solids destruction and instability of the digestion process. Co-digestion with cattle slurry or with vegetable waste led to acceptable specific and volumetric methane productions, and a digestate low in potentially toxic elements (PTE). The results were used to evaluate energy balances and greenhouse gas emissions of the integrated process compared with biodiesel production alone. Co-digestion was shown to provide energy self-sufficiency and security of supply to farms, with sufficient surplus for export as fuel and electricity.