Controlled release from triple layer,donut-shaped tablets with enteric polymers

The purpose of this research was to evaluate triple layer, donut-shaped tablets (TLDSTs) for extended release dosage forms. TLDSTs were prepared by layering 3 powders sequentially after pressing them with a punch. The core tablet consisted of enteric polymers, mainly hydroxypropyl methylcellulose acetate succinate, and the bottom and top layers were made of a water-insoluble polymer, ethyl cellulose. Drug release kinetics were dependent on the pH of the dissolution medium and the drug properties, such as solubility, salt forms of weak acid and weak base drugs, and drug loading. At a 10% drug loading level, all drugs, regardless of their type or solubility, yielded the same release profiles within an acceptable level of experimental error. As drug loading increased from 10% to 30%, the drug release rate of neutral drugs increased for all except sulfathiazole, which retained the same kinetics as at 10% loading. HCl salts of weak base drugs had much slower release rates than did those of neutral drugs (eg, theophylline) as drug loading increased. The release of labetalol HCl retarded as drug loading increased from 10% to 30%. On the other hand, Na salts of weak acid drugs had much higher release rates than did those of neutral drugs (eg, theophylline). Drug release kinetics were governed by the ionization/erosion process with slight drug diffusion, observing no perfect straight line. A mathematical expression for drug release kinetics (erosion-controlled system) of TLDSTs is presented. In summary, a TLDST is a good design to obtain zero-order or nearly zero-order release kinetics for a wide range of drug solubilities.     

Analysis of the shortvein cis-regulatory region of the decapentaplegic gene of Drosophila melanogaster

In mammals, the Transforming Growth Factor-beta (TGF-beta) superfamily controls a variety of developmental processes. In Drosophila, by contrast, a single member of the superfamily, decapentaplegic (dpp) performs most TGF-beta developmental functions. The complexity of dpp functions is reflected in the complex cis-regulatory sequences that flank the gene. Dpp is divided into three regions: Hin, including the protein-coding exons; disk, including 3' cis-regulatory sequences; and shortvein (shv), including noncoding exons and 5' cis-regulatory sequences. We analyzed the cis-regulatory structure of the shortvein region using a nested series of rearrangement breakpoints and rescue constructs. We delimit the molecular regions responsible for three mutant phenotypes: larval lethality, wing venation defects, and head capsule defects. Multiple overlapping elements are responsible for larval lethality and wing venation defects. However, the area regulating head capsule formation is distinct, and resides 5' to these elements. We have demonstrated this by isolating and describing two novel dpp alleles, which affect only the adult head capsule.     

Morphologies and conformation transition of lentinan in aqueous NaOH solution

Molecular morphologies and conformation transition of lentinan, a beta-(1-->3)-D-glucan from Lentinus edodes, were studied in aqueous NaOH solution by atomic force microscopy (AFM), viscometry, multiangle laser light scattering, and optical rotation measurements. The results revealed that lentinan exists as triple-helical chains and as single random-coil chains at NaOH concentration lower than 0.05M and higher than 0.08M, respectively. Moreover, the dramatic changes in weight-average molecular weight Mw, radius of gyration [s2](1/2), intrinsic viscosity [eta], as well as specific optical rotation at 589 nm [alpha]589 occurred in a narrow range of NaOH concentration between 0.05 and 0.08M NaOH, indicating that the helix-coil conformation transition of lentinan was carried out more easily than that of native schizophyllan and scleroglucan, and was irreversible. For the first time, we confirmed that the denatured lentinan molecule, which was dissolved in 0.15M NaOH to be disrupted into single coil chains, could be renatured as triple helical chain by dialyzing against abundant water in the regenerated cellulose tube at ambient temperature (15 degrees C). In view of the AFM image, lentinan in aqueous solution exhibited the linear, circular, and branched species of triple helix compared with native linear schizophyllan or scleroglucan.     

Gelation conditions and transport properties of hollow calcium alginate capsules

The diameter, membrane thickness, and compression intensity of hollow Ca-alginate capsules were measured at different gelation conditions, such as the reactant concentration, dropping velocity, and gelation time. The optimum operation conditions for preparing capsules were determined at 100 g/L CaCl(2), 10 g/L sodium alginate (Na-alginate), a dropping velocity of 150 droplets/min, and a gelation time of 10 min. Diffusion of some saccharide and amino acid from bulk solution into capsules was investigated, and the diffusion coefficients were calculated by the developed mathematical model. All the tested substances can diffuse easily into the capsules. The combined diffusion coefficients of the capsule D(m) are 92-99% as large as their diffusion coefficients in pure water, while the diffusion coefficients in the capsule membrane D(1) are 60-95% as large as those. By employing polyethylene glycol (PEG) and bovine serum albumin (fraction V) (BSA(V)), the molecular weight cut-off of the capsule was determined. For linear macromolecules, hollow Ca-alginate capsules have a molecular weight cut-off of 4000. No diffusion of BSA(V) into the capsules was observed.     

参乌胶囊及其有效成分二苯乙烯苷对老年大鼠脊髓腰节段细胞凋亡调节因子及p-CREB的影响

目的观察中药新复方参乌胶囊及其有效成分何首乌二苯乙烯苷对老年大鼠脊髓腰节段细胞凋亡及信号转导通路的影响。方法雄性SD大鼠,分为青年组（6月龄）、老年组（24月龄）、老年＋参乌胶囊小剂量（0.8 g/kg）、参乌胶囊大剂量（1.6 g/kg）、二苯乙烯苷小剂量（0.03 g/kg）、二苯乙烯苷大剂量（0.06 g/kg）组。应用Western blot方法检测大鼠脊髓腰节段Bax、Bcl-2及磷酸化cAMP反应元件结合蛋白（p-CREB）的变化及药物的干预作用。结果与6月龄青年大鼠相比,24月龄老年大鼠脊髓腰节段凋亡促进因子Bax的表达增加,凋亡抑制因子Bcl-2的表达减少,神经元存活信号转导通路中p-CREB的表达降低。参乌胶囊和二苯乙烯苷分别灌胃给药3个月能够抑制老年大鼠脊髓腰节段内BAX的表达,增强Bcl-2表达。参乌胶囊还能够上调p-CREB表达。结论乌胶囊及二苯乙烯苷能够改善老年大鼠脊髓腰节段Bax、Bcl-2和p-CREB的变化,提示该药可能具有延缓脊髓衰老的作用。     

Characterization of the Regions Involved in the Calcium-Induced Folding of the Intrinsically Disordered RTX Motifs from the Bordetella pertussis Adenylate Cyclase Toxin

Repeat in toxin (RTX) motifs are nonapeptide sequences found among numerous virulence factors of Gram-negative bacteria. In the presence of calcium, these RTX motifs are able to fold into an idiosyncratic structure called the parallel β-roll. The adenylate cyclase toxin (CyaA) produced by Bordetella pertussis, the causative agent of whooping cough, is one of the best-characterized RTX cytolysins. CyaA contains a C-terminal receptor domain (RD) that mediates toxin binding to the eukaryotic cell receptor. The receptor-binding domain is composed of about forty RTX motifs organized in five successive blocks (I to V). The RTX blocks are separated by non-RTX flanking regions of variable lengths. It has been shown that block V with its N- and C-terminal flanking regions constitutes an autonomous subdomain required for the toxicity of CyaA. Here, we investigated the calcium-induced biophysical changes of this subdomain to identify the respective contributions of the flanking regions to the folding process of the RTX motifs. We showed that the RTX polypeptides, in the absence of calcium, exhibited the hallmarks of intrinsically disordered proteins and that the C-terminal flanking region was critical for the calcium-dependent folding of the RTX polypeptides, while the N-terminal flanking region was not involved. Furthermore, the secondary and tertiary structures were acquired concomitantly upon cooperative binding of several calcium ions. This suggests that the RTX polypeptide folding is a two-state reaction, from a calcium-free unfolded state to a folded and compact conformation, in which the calcium-bound RTX motifs adopt a β-roll structure. The relevance of these results to the toxin physiology, in particular to its secretion, is discussed.     

Role of the Protective Antigen Octamer in the Molecular Mechanism of Anthrax Lethal Toxin Stabilization in Plasma

Anthrax is caused by strains of Bacillus anthracis that produce two key virulence factors, anthrax toxin (Atx) and a poly-γ-D-glutamic acid capsule. Atx is comprised of three proteins: protective antigen (PA) and two enzymes, lethal factor (LF) and edema factor (EF). To disrupt cell function, these components must assemble into holotoxin complexes, which contain either a ring-shaped homooctameric or homoheptameric PA oligomer bound to multiple copies of LF and/or EF, producing lethal toxin (LT), edema toxin, or mixtures thereof. Once a host cell endocytoses these complexes, PA converts into a membrane-inserted channel that translocates LF and EF into the cytosol. LT can assemble on host cell surfaces or extracellularly in plasma. We show that, under physiological conditions in bovine plasma, LT complexes containing heptameric PA aggregate and inactivate more readily than LT complexes containing octameric PA. LT complexes containing octameric PA possess enhanced stability, channel-forming activity, and macrophage cytotoxicity relative to those containing heptameric PA. Under physiological conditions, multiple biophysical probes reveal that heptameric PA can prematurely adopt the channel conformation, but octameric PA complexes remain in their soluble prechannel configuration, which allows them to resist aggregation and inactivation. We conclude that PA may form an octameric oligomeric state as a means to produce a more stable and active LT complex that could circulate freely in the blood.     

Co‐encapsulation of anti‐BCR‐ABL siRNA and imatinib mesylate in transferrin receptor‐targeted sterically stabilized liposomes for chronic myeloid leukemia treatment

Chronic myeloid leukemia (CML) is triggered by the BCR‐ABL oncogene. Imatinib is the first‐line treatment of CML; however imatinib resistance and intolerance have been detected in many patients. Therefore, new therapeutic approaches are required. The present work aimed at the development and application of transferrin receptor (TrfR) targeted liposomes co‐encapsulating anti‐BCR‐ABL siRNA and imatinib at different molar ratios. The encapsulation yields and drug loading of each molecule was evaluated. Anti‐leukemia activity of the developed formulations co‐encapsulating siRNA and imatinib and of the combination of Trf‐liposomes carrying siRNA and free imatinib under two different treatment schedules of pre‐sensitization was assessed. The results obtained demonstrate that the presence of imatinib significantly decreases the encapsulation yields of siRNA, whereas imatinib encapsulation yields are increased by the presence of siRNA. Cytotoxicity assays demonstrate that the formulations co‐encapsulating siRNA and imatinib promote a 3.84‐fold reduction on the imatinib IC₅₀ (from 3.49 to 0.91 µM), whereas a 8.71‐fold reduction was observed for the pre‐sensitization protocols (from 42.7 to 4.9 nM). It was also observed that the formulations with higher siRNA to imatinib molar ratios promote higher cell toxicity. Thus, the present work describes a novel triple targeting strategy with one single system: cellular targeting (through the targeting ligand, transferrin) and molecular targeting at the BCR‐ABL mRNA and Bcr‐Abl protein level. Biotechnol. Bioeng. 2010;107: 884–893. © 2010 Wiley Periodicals, Inc.     

Higher order structure of short collagen model peptides attached to dendrimers and linear polymers

Collagen, which is used as a biomaterial, is the most abundant protein in mammals. We have previously reported that a dendrimer modified with collagen model peptides, (Gly‐Pro‐Pro)₅, formed a collagen‐like triple‐helical structure, showing thermal reversibility. In this study, various collagen‐mimic dendrimers of different generations and at different binding ratios were synthesized, to investigate the relationship between the peptide clustering effect and the higher order structure formation. The formation of the higher order structure was influenced by the binding ratios of the peptide to the dendrimer, but was not influenced by the dendrimer generation. A spacer, placed between the dendrimer terminal group and the peptide, negatively contributed to the formation of the higher order structure. The collagen model peptides were also attached to poly(allylamine) (PAA) and poly‐L ‐lysine (poly(Lys)) to compare them with the collagen‐mimic dendrimers. The PAA‐based collagen‐mimic compound, bearing more collagen model peptides than the dendrimer, exhibited a thermally stable higher order structure. In contrast, this was not observed for the collagen‐mimic polymers based on poly(Lys). Therefore, dendrimers and vinyl polymers act as a scaffold for collagen model peptides and subsequently induce higher order structures. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 640–648, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com