Bioconversion of lignocellulose-derived sugars to ethanol by engineered Saccharomyces cerevisiae

Lignocellulosic biomass from agricultural and agro-industrial residues represents one of the most important renewable resources that can be utilized for the biological production of ethanol. The yeast Saccharomyces cerevisiae is widely used for the commercial production of bioethanol from sucrose or starch-derived glucose. While glucose and other hexose sugars like galactose and mannose can be fermented to ethanol by S. cerevisiae, the major pentose sugars D-xylose and L-arabinose remain unutilized. Nevertheless, D-xylulose, the keto isomer of xylose, can be fermented slowly by the yeast and thus, the incorporation of functional routes for the conversion of xylose and arabinose to xylulose or xylulose-5-phosphate in Saccharomyces cerevisiae can help to improve the ethanol productivity and make the fermentation process more cost-effective. Other crucial bottlenecks in pentose fermentation include low activity of the pentose phosphate pathway enzymes and competitive inhibition of xylose and arabinose transport into the cell cytoplasm by glucose and other hexose sugars. Along with a brief introduction of the pretreatment of lignocellulose and detoxification of the hydrolysate, this review provides an updated overview of (a) the key steps involved in the uptake and metabolism of the hexose sugars: glucose, galactose, and mannose, together with the pentose sugars: xylose and arabinose, (b) various factors that play a major role in the efficient fermentation of pentose sugars along with hexose sugars, and (c) the approaches used to overcome the metabolic constraints in the production of bioethanol from lignocellulose-derived sugars by developing recombinant S. cerevisiae strains.     

Renewable bio ionic liquids‐water mixtures‐mediated selective removal of lignin from rice straw: Visualization of changes in composition and cell wall structure

Pretreatment of rice straw by using renewable cholinium amino acids ionic liquids ([Ch][AA] ILs)‐water mixtures and the subsequent enzymatic hydrolysis of the residues were conducted in the present work. Of the eight mixtures composed of ILs and water, most were found to be effective for rice straw pretreatment. After pretreatment with 50% ILs‐water mixtures, the enzymatic digestion of the lignocellulosic biomass was enhanced significantly, thus leading to satisfactory sugar yields of >80% for glucose and approximately 50% for xylose. To better understand the ILs pretreatment mechanism, confocal laser scanning microscopy combined with immunolabeling and transmission electron microscopy were used to visualize changes in the contents and distribution of two major components—lignin and xylan. The results coupled with changes in chemical structures (infrared spectra) of the substrates indicated occurrence of extensive delignification, especially in cell corner and compound middle lumen of cell walls, which made polysaccharides more accessible to enzymes. This pretreatment process is promising for large‐scale application because of the high sugar yields, easy handling, being environmentally benign and highly tolerant to moisture, and significantly reduced cost and energy consumption. Biotechnol. Bioeng. 2013; 110: 1895–1902. © 2013 Wiley Periodicals, Inc.     

Co‐utilization of acidified glycerol pretreated‐sugarcane bagasse for microbial oil production by a novel Rhodosporidium strain

Acidified glycerol pretreatment is very effective to deconstruct lignocellulosics for producing glucose. Co‐utilization of pretreated biomass and residual glycerol to bioproducts could reduce the costs associated with biomass wash and solvent recovery. In this study, a novel strain Rhodosporidium toruloides RP 15, isolated from sugarcane bagasse, was selected and tested for coconversion of pretreated biomass and residual glycerol to microbial oils. In the screening trails, Rh. toruloides RP 15 demonstrated the highest oil production capacity on glucose, xylose, and glycerol among the 10 strains. At the optimal C:N molar ratio of 140:1, this strain accumulated 56.7, 38.3, and 54.7% microbial oils based on dry cell biomass with 30 g/L glucose, xylose, and glycerol, respectively. Furthermore, sugarcane bagasse medium containing 32.6 g/L glucose from glycerol‐pretreated bagasse and 23.4 g/L glycerol from pretreatment hydrolysate were used to produce microbial oils by Rh. toruloides RP 15. Under the preliminary conditions without pH control, this strain produced 7.7 g/L oil with an oil content of 59.8%, which was comparable or better than those achieved with a synthetic medium. In addition, this strain also produced 3.5 mg/L carotenoid as a by‐product. It is expected that microbial oil production can be significantly improved through process optimization.     

Selection and optimization of a suitable pretreatment method for miscanthus and poplar raw material

Miscanthus and poplar are very promising second‐generation feedstocks due to the high growth rates and low nutrient demand. The aim of the study was to develop a systematic approach for choosing suitable pretreatment methods evaluated with the modified severity factor (log ). Optimal pretreatment results in a high delignification grade, low cellulose solubilization and increased accessibility for enzymatic hydrolysis while revealing minimal log values. In order to do so, several reaction approaches were compared. Acid‐catalyzed organosolv processing carried out for miscanthus and poplar revealed the highest delignification grade leading to a relatively high glucose yield after enzymatic saccharification. In both cases, a design of experiments approach was used to study the influence of relevant parameters. Modeling the data resulted in the identification of optimum pretreatment conditions for miscanthus with concentrations of 0.16% H₂SO₄ and 50% EtOH at 185°C for a retention time of 60 min. Experimental validation of these conditions revealed an even higher delignification degree (88%) and glucose yield (85%) than predicted. 0.19% H₂SO₄ and 50% EtOH were determined as optimum concentrations, 182°C and 48 min identified as optimum pretreatment conditions for poplar; the delignification degree was 84% and the resulting glucose yield 70%.     

Photomorphogenesis of the root system in developing sunflower seedlings: a role for sucrose

• The domestic sunflower (Helianthus annuus L. cv. ‘Giganteus’) has been used since the 19th century as a model plant for the study of seedling development in darkness and white light (WL) (scoto‐ versus photomorphogenesis). However, most pertinent studies have focused on the developmental patterns of the hypocotyl and cotyledons, whereas the root system has been largely ignored.
• In this study, we analysed entire sunflower seedlings (root and shoot) and quantified organ development in the above‐ and belowground parts of the organism under natural (non‐sterile) conditions.
• We document that seedlings, raised in moist vermiculite, are covered with methylobacteria, microbes that are known to promote root development in Arabidopsis. Quantitative data revealed that during photomorphogenesis in WL, the root system expands by 90%, whereas stem elongation is inhibited, and hook opening/cotyledon expansion occurs. Root morphogenesis may be mediated via imported sucrose provided by the green, photosynthetically active cotyledons. This hypothesis is supported by the documented effect of sucrose on the induction of lateral root initials in sunflower cuttings. Under these experimental conditions, phytohormones (auxin, cytokinin, brassinolide) exerted little effect on root and cotyledon expansion, and no hormone‐induced initiation of lateral roots was observed.
• It is concluded that sucrose not only acts as an energy source to fuel cell metabolism but is also a shoot‐derived signalling molecule that triggers root morphogenesis.

     

Preparation and application of freeze-dried platelets

Clinical platelet infusion is primarily used to prevent or stop bleeding, but can also have a role in treating infections or promoting wound healing. The demand for platelets has increased in recent years. However, as platelets can only be stored for short periods, there is a substantial loss due to the products reaching their expiry date. Platelet lyophilization is a particularly valuable and important research field. The purpose of studying the freeze-drying preservation of platelets is to realize the long-term preservation of platelets at room temperature. It is very possible to prepare qualified freeze-dried platelets. However, there are still problems that have not been solved in the process of platelet lyophilization. This review mainly summarizes research progress in the preparation and application of freeze-dried platelets.     

Plant regeneration via direct somatic embryogenesis in Panax japonicus

Panax japonicus is one of the important medicinal plants. Here, we established the protocol for plant regeneration of P. japonicus via direct somatic embryogenesis. Somatic embryos were directly obtained from the segments of zygotic embryos on MS medium with 4.4 μM 2,4-D. Thereafter, somatic embryos were produced by repetitive secondary somatic embryogenesis. The secondary somatic embryo formation was enhanced by plasmolyzing pretreatment (1.0 M mannitol for 10 h). Frequency of secondary somatic embryo formation from cotyledon segments was lowered by plasmolyzing pretreatment, but the number of somatic embryos per explants was greatly increased. Plasmolyzing pretreatment resulted in retardation of embryo growth and required subculture to fresh medium for further growth of embryos into cotyledonary stage. Without plasmolyzing pretreatment, cotyledonary embryos were obtained after 8 weeks of culture. All the cotyledonary somatic embryos germinated by 5 μM GA₃ treatment, but only 15.3% were germinated on hormone-free medium. After 2 months of culture on 1/2 strength WPM medium, plantlets produced flowers spontaneously. In the anthers of in vitro flowers, microsporogenesis occurred normally with low number of pollen grains.     

青霉素酶发酵液的预处理和酶学特性

研究了在发酵液中添加絮凝剂对发酵液进行预处理,对蜡状芽孢杆菌（Bacillus cereus）产生青霉素酶的影响与酶学特性。实验结果表明,发酵液膜处理的难易程度与芽孢释放程度成正相关,在发酵液中添加0．02g／mL自制絮凝剂进行预处理,过滤效率提高10倍,而酶活损失仅5％;酶学特性研究结果表明,该酶最佳反应温度55℃时,酶的最适反应pH值7．0,金属离子锌、锰、镁对酶有激活作用,其浓度为0．25moL／L;酶热稳定性研究结果表明,在75℃下保温30min时,酶活损失85％。该酶在过量青霉素底物下,酶促反应为0级反应。