Development of the Predatory Stinkbug Brontocoris tabidus Signoret Heteroptera: Pentatomidae on Different Proportions of an Artificial Diet and Pupae of Tenebrio molitor L. Coleoptera: Tenebrionidae

The development of the Neotropical predatory pentatomid Brontocoris tabidus on an artificial diet based on beef meat and liver was evaluated. The predator showed significantly longer nymphal development and lower adult weights on this diet than when reared on pupae of the mealworm Tenebrio molitor. The survival of nymphs fed exclusively on the artificial diet was somewhat lower compared with feeding on T. molitor pupae. When B. tabidus was bred on this artificial diet during part of its nymphal period i.e. during the second; second and third; and second, third and fourth instars , and was subsequently returned to T. molitor pupae, the predator nymphs completed the nymphal stage with a developmental rate similar to that of nymphs fed on live prey throughout. The adults attained after switching from the artificial diet to live prey from the third and fourth instar onwards had similar weights to those in the control. Considering the relatively good results obtained with B. tabidus and other members of the pentatomid subfamily Asopinae, this meat-based diet may be a valuable alternative for use in the mass production of predatory pentatomids.     

AN ANALYSIS OF SELECTIONAL RESPONSE IN RELATION TO A POPULATION BOTTLENECK

Selection for increased morphometric shape (ratio of wing length to thorax width) was compared between control (nonbottlenecked) populations and bottlenecked populations founded with two male–female pairs of flies. Contrary to neutral expectation, selectional response was not reduced in bottlenecked populations, and the mean realized heritabilities and additive genetic variances were higher for the bottlenecked lines than for the nonbottlenecked lines. Additive genetic variances based on these realized heritabilities were consistent with independent estimates of genetic variances based on parent–offspring covariances. Joint scaling tests applied to the crosses between selected lines and their controls revealed significant nonadditive components of genetic variance in the ancestor, which were not detected in the crosses involving bottlenecked lines. The nonbottlenecked lines responded principally by changes in one trait or the other (wing length or thorax width) but not in both, and regardless of which trait responded, larger trait size was dominant and epistatic to smaller size. Stabilizing selection for morphometric shape in the ancestor likely molded the genetic architecture to include nonadditive genetic effects.     

Artificial seeding of the green seaweed Monostroma for cultivation

In Japan, the green seaweed Monostroma is an important source of humanfood. Monostroma nitidum Wittrock (Japanese name: hitoegusa) is cultivated in brackish waters and estuaries of central to southern Japan. The green seaweed Monostroma grows in the brackish water area in the upper part of the intertidal zone in the warm waters. Artificial seed culture began with the collection of many gametes in April. The resultant zygotes were allowed to adhere to plastic settlement boards (20 cm long and 10 cm wide). The zygoteboards were then cultured in tanks (1 ×2 ×0.5 m) with fertiliser in a controlled growth room (10–87 μmol photon m^-2s^-1). The cultivated zygotes on the board in the indoor tanks gradually increased in size from 10 to 40 μm in diameter during May to early August. Zygote growth became slowed at the end of August. The zygotesmatured in early September, and the plates were transferred into culture tanks in a dark room for dark treatment. Maturation of the zygote was promoted by providing dark conditions for two weeks. The production of a concentrated zoospore solution from the mature blades was achieved by adding fresh water at temperature 2–3 °C above that of the seeding vats. Zoospores were released in large numbers when exposed to strong irradiance of 100 μmol photon m^-2 s^-1 for 30 min. The zygotes produced flat unicellular fronds at the germling stage. The technology of artificial seed culture and zoospore release from the zygotes is based mainly on these experiments. This revised version was published online in August 2006 with corrections to the Cover Date.     

Ex situ conservation of plant germplasm using biotechnology

Conservation of plant genetic resources attracts more and more public interest as the only way to guarantee adequate food supplies for future human generations. However, the conservation and subsequent use of such resources are complicated by cultural, economical, technical and political issues. Over the last 30 years, there have been significant increases in the number of plant collections and in accessions in ex situ storage centres throughout the World. The present review is of these ex situ collections and the contribution biotechnology has made and can make to conservation of plant germplasm. The applications and limitations of the new, molecular approaches to germplasm characterization are discussed. In vitro slow growth is used routinely for conserving germplasm of plants such as banana, plantain, cassava and potato. More recently, cryopreservation procedures have become more accessible for long-term storage. New cryopreservation techniques, such as encapsulation-dehydration, vitrification and desiccation, lengthen the list of plant species that can not only tolerate low temperatures but also give normal growth on recovery. Extensive research is still needed if these techniques are to be fully exploited.V.M. Villalobos is with the Food and Agriculture Organization of the United Nations, Viale delle Terme di Caracalia, 00100 Rome, Italy. F. Engelmann is with the International Plant Genetic Resources Institute (IPGRI), Via delle Sette Chiese 142, 00145 Rome, Italy.     

Species-specific aggregation factor in sponges. XIII. Entire and core structure of the large circular proteid particle from Geodia cydonium

High-molecular weight particles have been isolated from the sponge Geodica cydonium. In the "native" from these particles consist of a spherical center and have 25-30 filaments attached to it. The core structure of the particles is assembled of a central circle and 25 radially-arranged filaments. The core structure is obtained from the entire structure by incubation in a medium, containing a non-ionic detergent and EDTA. The molecular weight of the enitre structure was in the range of 1.4 X 10(9) daltons or more and of the core structure 6.1 x 10(8) daltons. Two functional proteins are released from the "native" particles: the aggregation factor and the sialytransferase.     

人工饲养条件下马来熊(Helarctos malayanus)生长发育和行为特点的初步研究

1987年9月至1989年8月,笔者对来自云南瑞丽的2只雄性马来熊成体和7只幼体(3♂,4♀♀)在人工饲养条件下进行了观察研究,本文报道在不同生长时期的不同饲料配方、幼熊感觉器官的发育、齿式的形成、外部形态的变化、体重的生长方法及行为。     

隆线溞[Daphnia(Ctenodaphnia)carinata]卵鞍的超微结构

在不利的环境条件下,枝角类中有一部分种类可以形成卵鞍(ephippium),内含休眠卵。本文应用扫描电镜和透射电镜对隆线溞的卵鞍进行了超微结构的研究。研究表明:卵鞍外面大部分略呈浅的蜂窝状,内面则排布着多数卵石状小突起。卵鞍分为内外两层,两层的超微结构截然不同;各层又可分为三小层。     

Three-dimensional Orthotropic Viscoelastic Finite Element Model of a Human Ligament

Ligaments undergo finite strain displaying hyperelastic behaviour as the initially tangled fibrils present straighten out, combined with viscoelastic behaviour (strain rate sensitivity). In the present study the anterior cruciate ligament of the human knee joint is modelled in three dimensions to gain an understanding of the stress distribution over the ligament due to motion imposed on the ends, determined from experimental studies. A three dimensional, finite strain material model of ligaments has recently been proposed by Pioletti in Ref. [2]. It is attractive as it separates out elastic stress from that due to the present strain rate and that due to the past history of deformation. However, it treats the ligament as isotropic and incompressible. While the second assumption is reasonable, the first is clearly untrue. In the present study an alternative model of the elastic behaviour due to Bonet and Burton (Ref. [4]) is generalized. Bonet and Burton consider finite strain with constant modulii for the fibres and for the matrix of a transversely isotropic composite. In the present work, the fibre modulus is first made to increase exponentially from zero with an invariant that provides a measure of the stretch in the fibre direction. At 12% strain in the fibre direction, a new reference state is then adopted, after which the material modulus is made constant, as in Bonet and Burton's model. The strain rate dependence can be added, either using Pioletti's isotropic approximation, or by making the effect depend on the strain rate in the fibre direction only.

A solid model of a ligament is constructed, based on experimentally measured sections, and the deformation predicted using explicit integration in time. This approach simplifies the coding of the material model, but has a limitation due to the detrimental effect on stability of integration of the substantial damping implied by the nonlinear dependence of stress on strain rate. At present, an artificially high density is being used to provide stability, while the dynamics are being removed from the solution using artificial viscosity. The result is a quasi-static solution incorporating the effect of strain rate. Alternate approaches to material modelling and integration are discussed, that may result in a better model.     

YAP regulates periodontal ligament cell differentiation into myofibroblast interacted with RhoA/ROCK pathway

During orthodontic tooth movement (OTM), periodontal ligament cells (PDLCs) receive the mechanical stimuli and transform it into myofibroblasts (Mfbs). Indeed, previous studies have demonstrated that mechanical stimuli can promote the expression of Mfb marker α-smooth muscle actin (α-SMA) in PDLCs. Transforming growth factor β1 (TGF-β1), as the target gene of yes-associated protein (YAP), has been proven to be involved in this process. Here, we sought to assess the role of YAP in Mfbs differentiation from PDLCs. The time-course expression of YAP and α-SMA was manifested in OTM model in vivo as well as under tensional stimuli in vitro. Inhibition of RhoA/Rho-associated kinase (ROCK) pathway using Y27632 significantly reduced tension-induced Mfb differentiation and YAP expression. Moreover, overexpression of YAP with lentiviral transfection in PDLCs rescued the repression effect of Mfb differentiation induced by Y27632. These data together suggest a crucial role of YAP in regulating tension-induced Mfb differentiation from PDLC interacted with RhoA/ROCK pathway.