Comparison of the efficiency of urea,aqueous ammonia and ammonium sulphate as nitrogen fertilizers

Summary Nitrogen-15 labelled urea, aqueous NH₃ and (NH₄)₂SO₄ were applied to soils contained in pots. The fertilizers were injected in 5 cm³ of solution, 3.5 cm below the soil surface, to simulate a fertilizer band in the field. Ryegrass (Lolium perenne) was planted, and several cuttings and roots were harvested. Efficiency was determined as the recovery of fertilizer-N in the plant tissues and soil.Total recovery varied from 94 to 100%. There was no significant difference between the total recovery of the 3 fertilizer forms, although recovery in the soil component was lower for (NH₄)₂SO₄ than for urea or NH₃. There was a significant difference in total recovery between soils due to the soil component. Only small amounts of¹⁵N were not recovered, whereas laboratory experiments reported elsewhere had demonstrated that substantial gaseous losses of N as N₂, N₂O and NO +NO₂ occurred in these soils during nitrification of added NH₃ fertilizer.     

Osmotic permeability of Novikoff hepatoma cells

The osmotic permeability coefficient (P_f) for water movement across Novikoff hepatoma cells was found to be 82 ± 3 (S.E.) · 10^?5 cm · s^?1 at 20°C. The corresponding diffusional permeability coefficient for ³HHO (P_d) was 97 ± 10 (S.E.) · 10^?5 cm · s^?1, therefore the ratio $\text{P}{}_{\mathrm{<mtext>f</mtext>}}\text{P}{}_{\mathrm{<mtext>d</mtext>}}$ is close to unity. The apparent activation energy for water filtration was 10.4 ± 0.4 (S.E.) kcal · mol^?1. This value is significantly greater than the activation energy for the self diffusion of water. The product of the hydraulic permeability coefficient and the viscosity coefficient for water was temperature-dependent. However, the product of the hydraulic permeability coefficient and the viscosity coefficient for membrane lipid did not vary with temperature. These data are interpreted as evidence for water movement across a lipid membrane barrier rather than through aqueous channels.     

The estimation of micro-algal protein content and its meaning to the evaluation of algal biomass I. Comparison of methods for extracting protein

The spectrophotometric evaluation of micro-algal protein needs a prior extraction from cells in order to liberate protein for measurement. The conditions of extraction (temperature, duration, normality of sodium hydroxide, pretreatment) which yield optimal protein content are tested with three algal cultures (Scenedesmus, Synechococcus, Asterionella). A standard method of extraction is presented. Comparison of this method with nine published methods reveals markedly lower protein yields for easy extractable (43–100%) and hard extractable (5–75%) algal species, relative to this method, depending on ease of cell wall breakage. The application of this standard method to field investigations is demonstrated and compared to other biochemical parameters. The advantages of this method over other protein extraction methods, with respect to field material, are discussed.     

Effects of lignin content on the properties of lignocellulose-based biocomposites

The paper is focused on the analysis of the behaviour of biocomposites (biodegradable composites) which are reinforced with different fillers fractions, with varying lignin contents. These materials have been carried-out by extrusion and injection moulding. The matrix, an aromatic copolyester (polybutylene adipate-co-terephthalate), is biodegradable. The lignocellulose fillers are a by-product of an industrial fractionation process of wheat straw. From the raw agro-material and by lignin extractions, various fillers fractions have been obtained by varying the fractionation conditions, both on the liquid media (aqueous or organic) and on the temperature. The fillers lignin contents vary from 30 to 14 wt% with a resultant increase of the cellulose content. We have analysed the impact of the different extraction conditions on the fillers surface and size distribution, and also on the final thermal and mechanical properties of the biocomposites. These materials present significant differences of behaviour which can fulfil some requirements for applications, such as non-food packaging or other short-lived applications (agriculture, sport …) where long-lasting polymers are not entirely adequate.     

Pitfalls in the sample preparation and analysis of N-acylethanolamines

N-acylethanolamines (NAEs) are a group of lipid mediators synthesized in response to a number of physiological and pathological stimuli. Because of the low tissue concentrations of NAEs, analyses often include liquid extraction followed by solid-phase extraction and subsequent quantitation by LC/MS or GC/MS. Reported levels of NAEs vary considerably, however, and often no explanation is given for these discrepancies. Brought on by difficulties encountered during method development, the effects of using four different brands of silica-containing solid phase extraction (SPE) columns and five different brands of chloroform for sample preparation were investigated. Considerable variation in the retention and recoveries of seven NAEs and 2-arachidonoylglycerol existed between the SPE columns. Furthermore, it was found that some chloroforms contained quantifiable amounts of N-palmitoylethanolamine and N-stearoylethanolamine. Finally, it was found that use of one of the chloroforms resulted in a loss of N-oleoylethanolamine from solution due to addition of chlorine to the ω-9 bond. The identity of this reaction product was confirmed by LC-MS/MS and NMR. It is recommended that these aspects of sample preparation and analysis should be thoroughly validated during method development and the relevant information on specific brands used be reported in future communications in order to better estimate the validity of reported quantitative data.     

Human Health Risk Assessment of Soils Contaminated with Metal(loid)s by Using DGT Uptake: A Case Study of a Former Korean Metal Refinery Site

The human health risk of soils contaminated with As, Pb, Cu, and Zn was evaluated based on pseudo-total concentrations of metal(loid)s, the physiologically based extraction test (PBET), and diffusive gradients in thin films (DGT). Non-carcinogenic (NCR) and carcinogenic (CR) risks exceeded the U.S. Environmental Protection Agency criteria under both the residential and non-residential scenarios. Human bioavailable concentrations (PBET) were much lower than pseudo-total concentrations. The Hazardous Index of NCR (HI (NCR)) for the PBET in the studied soils was 67% and 94% less than that for pseudo-total concentration, respectively, under the non-residential and residential scenarios. Similarly, CR for the PBET was also 65% and 93% less for the two soils. The concentration of metal(loid)s accumulated in the DGT resin was highly correlated with the PBET-extractable concentration (R² > 0.649). Therefore, for both the CR and HI (NCR), the DGT-calculated risk was linearly related to the PBET-calculated risk for the studied soils under both scenarios. The results suggest that DGT uptake and PBET-extracted concentrations are good surrogates for risk estimation and that both J1 and J2 soils require remediation before their use for residential or non-residential purposes.     

Extraction and fractionation of complex lipid mixtures with dense carbon dioxide on a micro scale

The effects of pressure, temperature and some organic solvents on the recovery of various lipid classes from plant and animal tissues can be assessed by fractional extraction with dense carbon dioxide and consecutive analysis by thin-layer chromatography.     

Phallus impudicus loaded with γ-Fe2O3 as solid phase bioextractor for the preconcentrations of Zn(II) and Cr(III) from water and food samples

We investigated the application of fungus Phallus impudicus loaded γ-Fe₂O₃ nanoparticles as a biosorbent for magnetic solid phase extractions of trace levels of Zn(II) and Cr(III) ions from natural samples before their measurements by inductively coupled plasma optical emission spectrometry. The characterization of magnetized P. impudicus was performed using the scanning electron microscope, the energy dispersive X-ray and Fourier transform infrared spectroscopy. Important experimental factors were investigated. The experimental results fitted well to the Langmuir adsorption model and pseudo-second order kinetic model. Limit of detections of targeted ions by magnetic solid phase extraction method based on use of P. impudicus were found as 10.5 ngL⁻¹ and 12.6 ngL⁻¹ respectively for Cr(III) and Zn(II). The sorption capacities of the biosorbent were 22.8 mgg⁻¹ for Cr(III) and 25.6 mgg⁻¹ for Zn(II). The preconcentration factors were achieved as 100 for both of ions. RSDs for inter- and intraday precisions were found as lower than 2.0% and 2.1% respectively for both of targeted ions. The accuracy of the recommended process was tested by recovery measurements on the certificated reference materials and successfully applied for quantification recoveries of Cr(III) and Zn(II) ions from water and food samples.     

Errata

Human erythrocytes were exposed to oxidative stress by iodate and periodate. Oxidation causes a time- and concentration-dependent increase in membrane permeability for hydrophilic molecules and ions. The induced leak discriminates nonelectrolytes on the basis of molecular size and exhibits a very low activation energy (E_a = 1–4 kcal · mol^?1). These results are reconcilable with the formation of aqeous pores. The pore size was approximated to be between 0.45 and 0.6 nm. This increase in permeability is reversible upon treatment with dithioerythritol. Blocking of membrane thiol groups with N-ethylmaleimide protects the membranes against leak formation. The oxidation causes dithioerythritol-reversible modification of membrane proteins as indicated by the gel electrophoretic behavior. These modifications can also be suppressed by blocking the membrane thiol groups with N-ethylmaleimide. About half of the membrane methionine is oxidized to acid hydrolysis-stable derivatives. A fast saturating increase in diene conjugation was observed in whole cells but not in isolated membranes, with only minor degradation of fatty acid chains. The oxidation of cell membrane lipids as well as oxidation of cell surface carbohydrates are not involved in leak formation. Taken together with earlier data (Deuticke, B., Poster, B., Lütkemeier, P., and Haest, C.W.M. (1983) Biochim. Biophys. Acta 731, 196–210), these findings indicate that formation of disulfide bonds by different oxidative mechanisms results in leaks with similar properties.     

The Rise of Textured Perovskite Morphology: Revolutionizing the Pathway toward High‐Performance Optoelectronic Devices

Halide perovskite materials have achieved overwhelming success in various optoelectronic applications, especially perovskite solar cells and perovskite‐based light‐emitting diodes (P‐LEDs), owing to their outstanding optical and electric properties. It is widely believed that flat and mirror‐like perovskite films are imperative for achieving high device performance, while the potential of other perovskite morphologies, such as the emerging textured perovskite, is overlooked, which leaves plenty of room for further breakthroughs. Compared to flat and mirror‐like perovskites, textured perovskites with unique structures, e.g., coral‐like, maze‐like, column‐like or quasi‐core@shell assemblies, are more efficient at light harvesting and charge extraction, thus revolutionizing the pathways toward ultrahigh performance in perovskite‐based optoelectronic devices. Employing a textured perovskite morphology, the record of external quantum efficiency for P‐LEDs is demonstrated as 21.6%. In this research news, recent progress in the utilization of textured perovskite is summarized, with the emphasis on the preparation strategies and prominent optoelectronic properties. The impact of the textured morphology on light harvesting, carrier dynamic management, and device performance is highlighted. Finally, the challenges and great potential of employing these innovative morphologies in fabricating more efficient optoelectronic devices, or creating a new energy harvesting and conversion regime are also provided.