Effect of emulsified feeding of oily substrate via submerged ceramic membranes on surfactant production in <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> fermentation

Aqueous two-phase systems often face mass transfer limitations due to very poor miscibility of the fluids, and to enhance the homogeneity (or emulsification) in the reaction volume, high energy inputs are required which result in high shear forces in the culture medium. For the purposes of emulsification, microporous systems have advantages over other conventional methods due to mild operating conditions and narrow droplet-size distribution. In this study, emulsification within the culture volume was achieved by feeding the oily substrate (dispersed phase) into the aqueous medium (dispersion phase) via ceramic membranes integrated in the bioreactor. The method was investigated for bioprocesses aimed at producing rhamnolipids and polyhydroxyalkanoates (PHA). Better homogenization of the mixed volume and hence improved consumption of oily substrate was successful. Surfactants are produced by various bacterial cultures, especially Pseudomonas aeruginosa species, when oil is present as the only carbon source. Are surfactants produced only as a result of bacteria feeding on the oily substrate, or as a requirement to feed on the oily substrate, owing to their surface-active characteristics? This paper also intends to draw some conclusions in this respect.     

Property control of sophorolipids: influence of fatty acid substrate and blending

Sophorolipids (SLs) were synthesized by fed-batch fermentation of Candida bombicola on glucose and either palmitic acid (SL-p), stearic acid (SL-s), oleic acid (SL-o) or linoleic acid (SL-l) and the structural distribution accurately determined by atmospheric pressure chemical ionization-mass spectrometry (APCI-MS). The surfactant properties, including critical micelle concentration (CMC), minimum surface tension (min.ST) and oil-water interfacial tension (IFT) were measured by tensiometry. Minimum STs of 35–36 mN/m were obtained regardless of the substrate while IFTs ranged from 3–5 mN/m with the exception of SL-l, which had an IFT of 7 mN/m. The largest disparity occurred in the CMC values, which ranged from 35 ppm for SL-s to 250 ppm for SL-l. By manually mixing these four SLs in different ratios, it was possible to better control the CMC values without affecting the min.ST or IFT, which will prove beneficial as new applications for SLs are established. Mention of trade names or commercial products in this publication is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the U.S. Department of Agriculture.     

Secondary relaxations in supercooled and glassy sucrose-borate aqueous solutions

The dielectric relaxation spectra of concentrated aqueous solutions of sucrose-borate mixtures have been measured in the supercooled and glassy regions in the frequency range of 40Hz to 2MHz. The secondary (beta) relaxation process was analyzed in the temperature range 183-233K at water contents between 20 and 30wt%. The relaxation times were obtained, and the activation energy of that process was calculated. In order to assess the effect of borate on the relaxation of disaccharide-water mixtures, we also studied the dielectric behavior of sucrose aqueous solutions in the same range of temperatures and water contents. Our findings support the view that, beyond a water content of approximately 20wt%, the secondary relaxation of water-sucrose and water-sucrose-borate mixtures adopts a universal character that can be explained in terms of a simple exponential function of the temperature scaled by the glass transition temperature (T(g)). The behavior observed for water-sucrose and water-sucrose-borate mixtures is compared with previous results obtained in other water-carbohydrate systems.     

Thermomyces lanuginosus lipase in the liquid-crystalline phases of aqueous phytantriol: X-ray diffraction and vibrational spectroscopic studies

The influence of Thermomyces lanuginosus lipase (TLL) on the phase behaviour of liquid-crystalline phases of aqueous phytantriol as well as conformational changes of TLL entrapped in the cubic Q230 phase have been studied by small angle X-ray diffraction (SAXD), FT-Raman, and FT-IR techniques. It was found that the lipidic Q230 phase is able to accommodate up to 10 wt.% of TLL, and the temperature of phase transition to the inverted hexagonal phase H(II) increases indicating stabilizing effect of the protein. FT-Raman analysis of Trp amino acid marker band W3 revealed that the average rotation angle around the C3-Cbeta bond of four Trp residues of TLL in the Q230 phase increases. Reasoning from available TLL crystallographic data, this result is explained by structural transition of entrapped protein to so-called "open" and more related to the enzymatically-active conformation. TLL secondary structure analysis by amide I and amide III vibrational bands showed that content of alpha-helixes does not change, while a part of beta-sheet structures transforms to less ordered elements upon incorporation of protein into the Q230 phase of aqueous phytantriol.     

Specific cation effect on quenching reactions of excited tris(α,α-diimine)ruthenium(II) and tris(2,2-bipyridine)chromium(III) by tris(oxalato)- and tris(malnato)chromates(III) in aqueous solutions

Specific salt effects were studied on the quenching reaction of excited [Ru(N-N)₃]²⁺ (N-N=2,2^′-bipyridine (bpy), 1,10-phenanthrorine (phen)) and [Cr(bpy)₃]³⁺ by [Cr(ox)₃]³⁻ (ox=oxalate ion) and [Cr(mal)₃]³⁻ (mal=malonate ion) in aqueous solutions as a function of alkali metal ions which were added for adjustment of ionic strength. The value of k_q, quenching rate constants, and k₁, energy transfer rate constant in encounter complex, is changed by the cations as the order of Li⁺ > Na⁺ > K⁺ ≈ Rb⁺ ? Cs⁺, although diffusion rate constants are not changed by the co-existing cations. Among the quenching reactions investigated in this work, a ratio of k₁ values in the aqueous solutions whose ionic strength was adjusted with LiCl and KCl, k₁^LiCl/k₁^KCl, is larger for quenching systems of closely approached donor-acceptor pair than loosely bounded pair. These results indicate that co-existing alkali cation tunes the distance between donor and acceptor in encounter complex where energy transfer occurs.     

Kinetics and mechanism of the reduction of the molybdatopentaamminecobalt(III) ion by aqueous sulfite and aqueous potassium hexacyanoferrate(II)

A detailed investigation on the oxidation of aqueous sulfite and aqueous potassium hexacyanoferrate(II) by the title complex ion has been carried out using the stopped-flow technique over the ranges, 0.01≤[S(IV)]_T≤0.05 mol dm⁻³, 4.47≤pH≤5.12, and 24.9≤θ≤37.6 °C and at ionic strength 1.0 mol dm⁻³ (NaNO₃) for aqueous sulfite and 0.01≤[Fe(CN)₆ ⁴⁻]≤0.11 mol dm⁻³, 4.54≤pH≤5.63, and 25.0≤θ≤35.3 °C and at ionic strength 1.0 or 3.0 mol dm⁻³ (NaNO₃) for the hexacyanoferrate(II) ion. Both redox processes are dependent on pH and reductant concentration in a complex manner, that is, for the reaction with aqueous sulfite, k_obs={(k₁K₁K₂K₃+k₂K₁K₄[H⁺])[S(IV)]_T]/([H⁺]²+K₁[H⁺]+K₁K₂) and for the hexacyanoferrate(II) ion, k_obs={(k₁K₃K₄K₅+k₂K₃K₆[H⁺])[Fe(CN)₆ ⁴⁻]_T)/([H⁺]²+K₃[H⁺]+K₃K₄). At 25.0 °C, the value of k₁′ (the composite of k₁K₃) is 0.77±0.07 mol⁻¹ dm³ s⁻¹, while the value of k₂′ (the composite of k₂K₄) is (3.78±0.17)×10⁻² mol⁻¹ dm³ s⁻¹ for aqueous sulfite. For the hexacyanoferrate(II) ion, k₁′ (the composite of k₁K₅) is 1.13±0.01 mol⁻¹ dm³ s⁻¹, while the value of k₂′ (the composite of k₂K₆) is 2.36±0.05 mol⁻¹ dm³ s⁻¹ at 25.0 °C. In both cases there was reduction of the cobalt(III) centre to cobalt(II), but there was no reduction of the molybdenum(VI) centre. k₂₂, the self-exchange rate constant, for aqueous sulfite (as SO₃ ²⁻) was calculated to be 5.37×10⁻¹² mol⁻¹ dm³ s⁻¹, while for Fe(CN)₆ ⁴⁻, it was calculated to be 1.10×10⁹ mol⁻¹ dm³ s⁻¹ from the Marcus equations.     

Freeze-substitution of dehydrated plant tissues: Artefacts of aqueous fixation revisited

Summary This investigation assessed the extent of rehydration of dehydrated plant tissues during aqueous fixation in comparison with the fine structure revealed by freeze-substitution. Radicles from desiccation-tolerant pea (Pisum sativum L.), desiccation-sensitive jackfruit seeds (Artocarpus heterophyllus Lamk.), and leaves of the resurrection plantEragrostis nindensis Ficalho & Hiern. were selected for their developmentally diverse characteristics. Following freeze-substitution, electron microscopy of dehydrated cells revealed variable wall infolding. Plasmalemmas had a trilaminar appearance and were continuous and closely appressed to cell walls, while the cytoplasm was compacted but ordered. Following aqueous fixation, separation of the plasmalemma and the cell wall, membrane vesiculation and distortion of cellular substructure were evident in all material studied. The sectional area enclosed by the cell wall in cortical cells of dehydrated pea and jackfruit radicles and mesophyll ofE. nindensis increased after aqueous fixation by 55, 20, and 30%, respectively. Separation of the plasmalemma and the cell wall was attributed to the characteristics of aqueous fixatives, which limited the expansion of the plasmalemma and cellular contents but not that of the cell wall. It is proposed that severed plasmodesmatal connections, plasmalemma discontinuities, and membrane vesiculation that frequently accompany separation of walls and protoplasm are artefacts of aqueous fixation and should not be interpreted as evidence of desiccation damage or membrane recycling. Evidence suggests that, unlike aqueous fixation, freeze-substitution facilitates reliable preservation of tissues in the dehydrated state and is therefore essential for ultrastructural studies of desiccation.Abbreviations LM light microscopy - TEM transmission electron microscopy - CF conventional (aqueous) fixation - FS freeze-substitution - ER endoplasmic reticulum     

Isolation of a novel stable peptide from cultivated Raphanus sativus with peroxidase activity

Isolation of a novel stable peptide from cultivated Raphanus sativus with peroxidase activity has been achieved using zinc ion precipitation followed by aqueous two phase extraction with a polyethylene glycol (PEG)/phosphate system. The best result was achieved with PEG 600/phosphate (28.8/13% w/v) which extracted 96.15% of total enzyme activity. The peptide has a molecular weight of 5.85 kD as determined by HPLC size exclusion method with an optimized pH of 6.     

Electron transfer reactions between quinols and quinones in aqueous and aprotic media

The pathways of redox equilibration of quinols and quinones have been investigated. The rate-limiting reaction involves the couple QH^?/QH^· of the reducing quinol and the couple Q^?/Q of the oxidising quinone. Three general mechanistic points may be surmised: (i) protonation/deprotonation reactions are not rate-limiting; (ii) all transfers occur in one-equivalent steps; (iii) electron transfers, but not hydrogen atom transfers, are the dominant features. In aprotic media, no rapid route of equilibration is available since the ionic species which are necessary for thermodynamically feasible routes of electron transfer cannot exist to any great extent. The relation of these results to models of biological quinone systems is discussed.     

Nature of micellar calcium phosphate in cows' milk as studied by high-resolution electron microscopy

The nature of the inorganic calcium phosphate in the casein micelle of cows' milk has been studied by high-resolution electron microscopy. No periodic lattice spacings could be imaged, and diffraction patterns were of the diffuse amorphous type. Short-range order of less than 15 Å may be present, but the results indicate that there is no long-range order in micellar calcium phosphate.