Muscle fatigue and metabolic responses following three different antagonist pre-load resistance exercises

PurposePreload of antagonist muscles can be achieved by reciprocal actions (RAs) or by opposing muscle actions. However, evidence concerning neuromuscular and fatigue responses are scarce.ObjectiveTo compare the effects of different knee flexor (KF) preload methods on knee extension (KE) vastus medialis muscle fatigue, based on EMG-spectral index (FI), load range (LR), total work (TW), blood lactate (LAC) and biceps femoris co-activation (BFc) during resistance exercise.MethodsTwenty-four healthy men (23.5 ± 3.6 yrs) performed three antagonist pre-load isokinetic exercises (4 sets, 10 repetitions, 60° s^?1, 1 min rest between sets): RA (KF contraction immediately followed by KE); Superset (SS; one KF set immediately followed by one KE set); Multiple Set (MS; four KF sets followed by four KE sets).ResultsTotal work was significantly greater in RA. There was no significant decrease in LR between sets in RA. The BFc did not differ between protocols (p = 0.063). However, RA presented greater biceps femoriscoactivation. The FI was greater during SS compared to RA and MS (p < 0.05). The SS had greater LAC when compared to MS and RA (p = 0.005 and p = 0.007, respectively).ConclusionIt is suggested that the RA protocol is more neuromuscular and metabolic efficient during the performance of knee extension resistance exercise.     

An improved OpenSim gait model with multiple degrees of freedom knee joint and knee ligaments

Musculoskeletal models are widely used to investigate joint kinematics and predict muscle force during gait. However, the knee is usually simplified as a one degree of freedom joint and knee ligaments are neglected. The aim of this study was to develop an OpenSim gait model with enhanced knee structures. The knee joint in this study included three rotations and three translations. The three knee rotations and mediolateral translation were independent, with proximodistal and anteroposterior translations occurring as a function of knee flexion/extension. Ten elastic elements described the geometrical and mechanical properties of the anterior and posterior cruciate ligaments (ACL and PCL), and the medial and lateral collateral ligaments (MCL and LCL). The three independent knee rotations were evaluated using OpenSim to observe ligament function. The results showed that the anterior and posterior bundles of ACL and PCL (aACL, pACL and aPCL, pPCL) intersected during knee flexion. The aACL and pACL mainly provided force during knee flexion and adduction, respectively. The aPCL was slack throughout the range of three knee rotations; however, the pPCL was utilised for knee abduction and internal rotation. The LCL was employed for knee adduction and rotation, but was slack beyond 20° of knee flexion. The MCL bundles were mainly used during knee adduction and external rotation. All these results suggest that the functions of knee ligaments in this model approximated the behaviour of the physical knee and the enhanced knee structures can improve the ability to investigate knee joint biomechanics during various gait activities.     

Development of software for human muscle force estimation

Muscle force estimation (MFE) has become more and more important in exploring principles of pathological movement, studying functions of artificial muscles, making surgery plan for artificial joint replacement, improving the biomechanical effects of treatments and so on. At present, existing software are complex for professionals, so we have developed a new software named as concise MFE (CMFE). CMFE which provides us a platform to analyse muscle force in various actions includes two MFE methods (static optimisation method and electromyographic-based method). Common features between these two methods have been found and used to improve CMFE. A case studying the major muscles of lower limb of a healthy subject walking at normal speed has been presented. The results are well explained from the effect of the motion produced by muscles during movement. The development of this software can improve the accuracy of the motion simulations and can provide a more extensive and deeper insight in to muscle study.     

A novel rapid prototyping and finite element method-based development of the patient-specific temporomandibular joint implant

Objective: The objective of this study was to fabricate a successful implant for temporomandibular joint (TMJ) disorder patients who could not be treated through conventional surgeries.

Methods: A custom-made implant was fabricated using rapid prototyping (RP) for the TMJ surgery. The stability of the metallic implant was validated using a finite element analysis.

Results: The results of finite elements were stable and the design of the TMJ implant was suitable as per the patient's need. The customised implant was made using a fused deposition modelling method of RP and a vertical machining centre. The implant has provided normal jaw function for over 2 years since surgery.

Conclusions: The approach utilised will be helpful in providing successful treatment to the deformed mandible and the mandible joints. This method allows to customise and to accurately fabricatie the implant. Advantages of this approach are that the physical model of the implant was tested for stability before the implantation, the surgeon can plan and rehearse the surgery in advance, it is a less invasive and less time-consuming surgical procedure.     

A novel cross-shear metric for application in computer simulation of ultra-high molecular weight polyethylene wear

Wear testing of polyethylene in total joint replacements is common and required for any new device. Computational wear modelling has obvious utility in this context as it can be conducted with much greater economy than physical testing. Archard's law has become the accepted standard for wear simulation in total joints but it does not account for cross-shear, which is known to increase wear significantly relative to unidirectional sliding. The purpose of this study was to develop a robust cross-shear model applicable to any interface geometry under any kinematic conditions. The proposed metric, x ^*, is distinguished from existing cross-shear models by the fact that it measures cross-path motion incrementally throughout a motion cycle and quantifies cross-shear based on incremental changes in sliding direction. Validation showed strong support for the predictive capability of x ^* when applied to pin-on-disc test data.     

Preliminary simulation model toward the study of the effects caused by different mandibular advancement devices in OSAS treatment

Abstract

The paper aims to evaluate the effects caused by a Mandibular Advancement Device (MAD) for Obstructive Sleep Apnoea Syndrome (OSAS) treatment. This study is based on Finite Element Method (FEM) for evaluating the load distribution on temporomandibular joint, especially on the mandibular condyle and disc, and on periodontal ligaments. The stress values on condyle and periodontal ligaments lead authors to consider MAD a safe procedure even for a long period. The obtained results also show the relationship between MAD material and load distribution at the periodontal ligaments. The paper is a step toward future analyses for studying and comparing the effects of MAD features, such as material, shape and dimensions, in order to allow the clinician prescribing the most fitting device.     

Influence of the method of TM joint total replacement implantation on the loading of the joint on the opposite side

The temporomandibular (TM) joint is one of the most used joints in the human body, and any defect in this joint has a significant influence on quality of life. The objective of this study was to create a parametric numerical finite element (FE) analysis to compare the effect of surgical techniques used for total TM joint replacement implantation on loading the TM joint on the other side. Our hypothesis is that for the optimal function of all total TM joint replacements used in clinical practice it is crucial to devise a minimally invasive surgical technique, whereby there is minimum resection of masticatory muscles. This factor is more important than the design of the usually used total TM joint replacements. The extent of muscle resection influences the mechanical loading of the whole system. In the parametric FE analyses, the magnitude of the TM joint loading was compared for four different ranges of muscle resections during bite, using an anatomical model. The results obtained from all FE analyses support our hypothesis that an increasing extent of the muscle resection increased the magnitude of the TM joint overloading on the opposite side. The magnitude of the TM joint overloading increased depending on the muscle resection to 235% for bite on an incisor and up to 491% for bite on molars. Our study leads to a recommendation that muscle resection be minimised during replacement implantation and to a proposal that the attachment of the condylar part of the TM joint replacement be modified.     

Wear analysis in anatomical and reversed shoulder prostheses

This paper describes the development of a computational model to calculate wear rates in total shoulder prostheses, for a 5–150 degrees arm abduction. Anatomical keeled and pegged prosthesis as well as reversed prosthesis were the studied implants. The bone models were built based on computed tomography (CT) images and using a computer aided design-based modelling pipeline. The finite element method was used to solve the contact problem between the surface of the polyethylene (PE) components and the corresponding articular component. The aim of this work was to determine linear and volumetric PE wear, for several radial mismatches, in conditions of pathological (rheumatoid arthritis) and non-pathological bone. Results showed that contact pressures and linear wear developed in anatomical prosthesis were higher than those visualised in reversed prosthesis. However, anatomical prosthesis exhibited a better volumetric wear performance. Moreover, our findings indicated higher values of volumetric wear in higher congruent models and on pathological bone conditions.