Luminescent properties of europium complexes with bis(diphenylphosphino)alkane dioxides

Eu(NO₃)₃?5H₂O and EuCl₃?6H₂O were allowed to react with bis(diphenylphosphino)alkane dioxides Ph₂P(O)(CH₂)_nP(O)Ph₂ (n = 2, 4, 6) to obtain polymeric and binuclear complexes. The prepared compounds were structurally characterized by X‐ray diffraction. Luminescence measurements (emission and excitation spectra, quantum yields, lifetimes) were compared with crystallographic data in order to find a relationship between luminescent properties of the Eu(III) complexes and their structures. The Eu(III) polymers, especially [Eu(dpphO₂)₂Cl₂]⁺Cl^–}_n, have shown extremely long luminescence lifetimes, up to 3.73 ms, as a result of a highly protecting hydrophobic shield. Copyright © 2011 John Wiley & Sons, Ltd.     

Luminescence studies on Al4B2O9:Eu2+ phosphor crystals

A novel blue‐emitting phosphor, Eu²⁺‐doping Al₄B₂O₉, was prepared via a modified solid‐state reaction. Al₄B₂O₉:Eu²⁺ nanoparticles with diameters varying in a range from 20 to 50 nm were obtained using urea as an auxiliary reagent at the optimum temperature of 850°C. The crystallization and particle sizes of Al₄B₂O₉:Eu²⁺ were investigated using powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Photoluminescence (PL) results showed that Al₄B₂O₉:Eu²⁺ phosphor could be efficiently excited by the ultraviolet region from 240 to 410 nm, exhibiting bright blue emission. Further investigation on concentration‐dependent emission spectra indicated that the Al_3.997B₂O₉:Eu²⁺_0.003 phosphor exhibited the strongest luminescent, and the relative PL intensity decreased with increasing Eu²⁺ concentration due to concentration quenching. In addition, the concentration quenching for the one‐Eu‐site emission centers was caused by the electric multipole–multipole interaction. Copyright © 2010 John Wiley & Sons, Ltd.     

Upconverted photoluminescence in Ho3+ and Yb3+ codoped Gd2O3 nanocrystals with and without Li+ ions

The upconversion photoluminescence of Ho³⁺ ion sensitized by Yb³⁺ ion in Ho³⁺/Yb³⁺codoped Gd₂O₃ nanocrystals with and without Li⁺ is investigated in this paper. Strong fluorescence in the green (534–570 nm) and red (635–674 nm) regions of the spectrum has been observed, arising from the ⁵F₄/⁵S₂ → ⁵I₈ and ⁵F₅ → ⁵I₈ transitions of Ho³⁺ ion, respectively. Yb³⁺ ion is considered to be a better sensitizer for catching enough pumping energy and transferring considerable energy to Ho³⁺ in the Ho³⁺/Yb³⁺system. The upconversion intensity emitted by Ho³⁺ is greatly enhanced when Li⁺ is added to the Ho³⁺/Yb³⁺ codoped Gd₂O₃ nanocrystals.     

Novel pure Ca2ZnMoO6 composition with white‐light luminescence

Phosphors with composition Ca₂ZnMoO₆ were synthesized at temperatures of 800–1200°C using the solid‐state method. Analysis of X‐ray diffraction patterns of the Ca₂ZnMoO₆ powders did not reveal a double perovskite structure. When the synthesis temperature was equal to or higher than 800°C, the synthesized Ca₂ZnMoO₆ powders revealed a tetragonal structure (CaMoO₄) rather than an orthorhombic structure (Ca₂ZnMoO₆) and the cubic structure (Sr₂ZnMoO₆) of a double perovskite. The ZnO phase was still observed at a synthesis temperature of 1200°C. The compositions of synthesized Ca₂ZnMoO₆ powders differed from the prepared powder, and the Ca₂ZnMoO₆ phosphors exhibited some important novel features. First, synthesized Ca₂ZnMoO₆ compositions could emit light as a phosphor no activators, called Ca₂ZnMoO₆ phosphors. Effect of synthesis temperature on luminescence properties of these Ca₂ZnMoO₆ phosphors was readily observed, and some important novel features and properties were noted. Second, the phosphors presented only one broad characteristic emission peak in the visible light region. Third, measurement of the chromaticity diagram of the Ca₂ZnMoO₆ phosphors revealed a white‐light source. Through analysis, we determined why the synthesized Ca₂ZnMoO₆ phosphors had just one broad characteristic emission peak.     

Luminescence properties of a novel red phosphor 6LaPO4–3La3PO7–2La7P3O18:Eu3+

Eu³⁺‐doped 6LaPO₄–3La₃PO₇–2La₇P₃O₁₈ red luminescent phosphors were synthesized by co‐deposition and high‐temperature solid‐state methods and its polyphase state was confirmed by X‐ray diffraction analysis. Transmission electron microscopy showed the grain morphology as a mixture of rods and spheres. Luminescence properties of the phosphor were investigated and its red emission parameters were evaluated as a function of Eu³⁺ concentration (3.00–6.00 mol%). Excitation spectra of 6LaPO₄–3La₃PO₇–2La₇P₃O₁₈:Eu³⁺ showed strong absorption bands at 280, 395, and 466 nm, while the luminescence spectra exhibited prominent red emission peak centred at 615 nm (⁵D₀→⁷F₂) in the red region. CIE chromaticity coordinates of the 6LaPO₄–3La₃PO₇–2La₇P₃O₁₈:5%Eu³⁺ phosphor were (0.668, 0.313) in the red region, and defined its potential application as a red phosphor.     

A turn‐off fluorescence probe based on terpyridine for pH monitoring

A new pH‐dependent fluorescence probe 2,8‐bis((E)‐4‐([2,2′:6′,2″‐terpyridin]‐4′‐yl)styryl)‐6H,12H‐5,11‐methanodibenzo[b,f][1,5]diazocine (TBPTP) based on Tröger's base (TB) bound to terpyridine was designed and synthesized. Photophysical properties and titration experiments of TBPTP were investigated by absorption and fluorescence spectroscopy. TBPTP exhibited high sensitivity in an acidic environment with the working pH range 7.2–2.5, especially having a good liner response to pH changes in the range 2.5–4.3, which suggested that TBPTP is a good candidate for pH monitoring.     

稀土发光材料在荧光成像中的应用

稀土发光材料由于具有荧光寿命长、发射峰半峰宽窄和Stokes位移大等发光性质,在生命科学研究的各个领域,包括荧光免疫分析、离子识别、蛋白质活性测定、核酸检测等,有着广泛而重要的应用前景.本文以稀土配合物、稀土掺杂上转换材料和长余辉材料为代表,就当前稀土发光材料的发光性质及其在生物成像标记方面的研究做一综述,并对稀土发光...     

Thermodynamics and laser luminescence spectroscopy of binary and ternary complexation of Am, Cm and Eu with citric acid, and citric acid + EDTA at high ionic strength

The binary complexation of Am³⁺, Cm³⁺and Eu³⁺ with citrate has been studied at I = 6.60 m (NaClO₄), pcH 3.60 and in the temperatures range of 0-60 °C employing a solvent extraction technique with di-(2-ethylhexyl)phosphoric acid/heptane. Two complexes, MCit and , were formed at all temperatures. For the three metal ions, the log β₁₀₁ was between 5.9 and 6.2 and log β₁₀₂ between 10.2 and 10.6 at 25 °C. The thermodynamic parameters for the Am-Cit system have been calculated from the temperature dependence of the β₁₀₁ and β₁₀₂ values. Positive enthalpy and entropy values for the formation of both complexes are interpreted as due to the contributions from the dehydration of the metal ions exceeding the exothermic cation-anion pairing. The formation of the ternary complex M(EDTA)(Cit)⁴⁻ (M = Cm and Eu) was measured to have large stability constants (log β₁₁₁ between 20.9 and 24.4) at 25 and 60 °C. Time resolved laser luminescence spectroscopy and lifetime measurement data validated the nature of the complexes of Eu(III) formed in the presence of Cit and EDTA + Cit in 6.60 m (NaClO₄) solution.     

Aequorin luminescence-based assay for 5-hydroxytryptamine (serotonin) type 3 receptor characterization

The classical electrophysiological method to measure the function of the 5-hydroxytryptamine (serotonin) type 3 (5-HT(3)) receptor, a cation-permeable ligand-gated ion channel, is time-consuming and not suitable for high-throughput screening. Therefore, we have optimized the conditions for a sensitive assay suitable to measure 5-HT(3) receptor responses in cell suspension based on aequorin bioluminescence caused by Ca(2+) influx. The assay, carried out in 96-well plates, was applied for the pharmacological characterization of 5-HT(3) receptors on human embryonic kidney (HEK) 293 cells transiently coexpressing apoaequorin and either the human homopentameric 5-HT(3A) receptor or the human heteromeric 5-HT(3A/B) receptor in the same subset of cells. Thus, the luminescence signal originates exclusively from transfected cells, leading to a high signal/noise ratio, a major advantage compared with fluorescence techniques using Ca(2+)-sensitive dyes. The potencies of two 5-HT(3A) receptor agonists and two antagonists as well as the potency and efficacy of serotonin at the heteromeric 5-HT(3A/B) receptor were comparable to those reported using other functional methods. In conclusion, the aequorin assay described here provides a convenient and highly sensitive method for functional characterization of 5-HT(3) receptors that is well suited for high-throughput screening.     

Weak biophoton emission after laser surgery application in soft tissues: Analysis of the optical features

Nowadays, laser scalpels are commonly used in surgery, replacing the traditional surgical scalpels for several applications involving cutting or ablating living biological tissue. Laser scalpels are generally used to concentrate light energy in a very small‐sized area; light energy is then converted in heat by the tissues. In other cases, the fiber glass tip of the laser scalpel is heated to high temperature and used to cut the tissues. Depending on the temperature reached in the irradiated area, different effects are visible in the tissues. In this study, we report the discovery and characterization of the light emitted by soft mammalian biological tissues from seconds to hours after laser surgery application. A laser diode (with hot fiber glass tip) working at 808 nm and commercially available for medical and dentistry applications was used. The irradiated tissues (red meat, chicken breast and fat) showed light emission in the visible range, well detectable with a commercial charge coupled device (CCD) camera. The time decay of the light emission, the laser power effects and the spectral features in the range 500 to 840 nm in the different tissues are here reported.