Renewable bio ionic liquids‐water mixtures‐mediated selective removal of lignin from rice straw: Visualization of changes in composition and cell wall structure

Pretreatment of rice straw by using renewable cholinium amino acids ionic liquids ([Ch][AA] ILs)‐water mixtures and the subsequent enzymatic hydrolysis of the residues were conducted in the present work. Of the eight mixtures composed of ILs and water, most were found to be effective for rice straw pretreatment. After pretreatment with 50% ILs‐water mixtures, the enzymatic digestion of the lignocellulosic biomass was enhanced significantly, thus leading to satisfactory sugar yields of >80% for glucose and approximately 50% for xylose. To better understand the ILs pretreatment mechanism, confocal laser scanning microscopy combined with immunolabeling and transmission electron microscopy were used to visualize changes in the contents and distribution of two major components—lignin and xylan. The results coupled with changes in chemical structures (infrared spectra) of the substrates indicated occurrence of extensive delignification, especially in cell corner and compound middle lumen of cell walls, which made polysaccharides more accessible to enzymes. This pretreatment process is promising for large‐scale application because of the high sugar yields, easy handling, being environmentally benign and highly tolerant to moisture, and significantly reduced cost and energy consumption. Biotechnol. Bioeng. 2013; 110: 1895–1902. © 2013 Wiley Periodicals, Inc.     

Co‐utilization of acidified glycerol pretreated‐sugarcane bagasse for microbial oil production by a novel Rhodosporidium strain

Acidified glycerol pretreatment is very effective to deconstruct lignocellulosics for producing glucose. Co‐utilization of pretreated biomass and residual glycerol to bioproducts could reduce the costs associated with biomass wash and solvent recovery. In this study, a novel strain Rhodosporidium toruloides RP 15, isolated from sugarcane bagasse, was selected and tested for coconversion of pretreated biomass and residual glycerol to microbial oils. In the screening trails, Rh. toruloides RP 15 demonstrated the highest oil production capacity on glucose, xylose, and glycerol among the 10 strains. At the optimal C:N molar ratio of 140:1, this strain accumulated 56.7, 38.3, and 54.7% microbial oils based on dry cell biomass with 30 g/L glucose, xylose, and glycerol, respectively. Furthermore, sugarcane bagasse medium containing 32.6 g/L glucose from glycerol‐pretreated bagasse and 23.4 g/L glycerol from pretreatment hydrolysate were used to produce microbial oils by Rh. toruloides RP 15. Under the preliminary conditions without pH control, this strain produced 7.7 g/L oil with an oil content of 59.8%, which was comparable or better than those achieved with a synthetic medium. In addition, this strain also produced 3.5 mg/L carotenoid as a by‐product. It is expected that microbial oil production can be significantly improved through process optimization.     

Selection and optimization of a suitable pretreatment method for miscanthus and poplar raw material

Miscanthus and poplar are very promising second‐generation feedstocks due to the high growth rates and low nutrient demand. The aim of the study was to develop a systematic approach for choosing suitable pretreatment methods evaluated with the modified severity factor (log ). Optimal pretreatment results in a high delignification grade, low cellulose solubilization and increased accessibility for enzymatic hydrolysis while revealing minimal log values. In order to do so, several reaction approaches were compared. Acid‐catalyzed organosolv processing carried out for miscanthus and poplar revealed the highest delignification grade leading to a relatively high glucose yield after enzymatic saccharification. In both cases, a design of experiments approach was used to study the influence of relevant parameters. Modeling the data resulted in the identification of optimum pretreatment conditions for miscanthus with concentrations of 0.16% H₂SO₄ and 50% EtOH at 185°C for a retention time of 60 min. Experimental validation of these conditions revealed an even higher delignification degree (88%) and glucose yield (85%) than predicted. 0.19% H₂SO₄ and 50% EtOH were determined as optimum concentrations, 182°C and 48 min identified as optimum pretreatment conditions for poplar; the delignification degree was 84% and the resulting glucose yield 70%.     

Preparation and application of freeze-dried platelets

Clinical platelet infusion is primarily used to prevent or stop bleeding, but can also have a role in treating infections or promoting wound healing. The demand for platelets has increased in recent years. However, as platelets can only be stored for short periods, there is a substantial loss due to the products reaching their expiry date. Platelet lyophilization is a particularly valuable and important research field. The purpose of studying the freeze-drying preservation of platelets is to realize the long-term preservation of platelets at room temperature. It is very possible to prepare qualified freeze-dried platelets. However, there are still problems that have not been solved in the process of platelet lyophilization. This review mainly summarizes research progress in the preparation and application of freeze-dried platelets.     

Plant regeneration via direct somatic embryogenesis in Panax japonicus

Panax japonicus is one of the important medicinal plants. Here, we established the protocol for plant regeneration of P. japonicus via direct somatic embryogenesis. Somatic embryos were directly obtained from the segments of zygotic embryos on MS medium with 4.4 μM 2,4-D. Thereafter, somatic embryos were produced by repetitive secondary somatic embryogenesis. The secondary somatic embryo formation was enhanced by plasmolyzing pretreatment (1.0 M mannitol for 10 h). Frequency of secondary somatic embryo formation from cotyledon segments was lowered by plasmolyzing pretreatment, but the number of somatic embryos per explants was greatly increased. Plasmolyzing pretreatment resulted in retardation of embryo growth and required subculture to fresh medium for further growth of embryos into cotyledonary stage. Without plasmolyzing pretreatment, cotyledonary embryos were obtained after 8 weeks of culture. All the cotyledonary somatic embryos germinated by 5 μM GA₃ treatment, but only 15.3% were germinated on hormone-free medium. After 2 months of culture on 1/2 strength WPM medium, plantlets produced flowers spontaneously. In the anthers of in vitro flowers, microsporogenesis occurred normally with low number of pollen grains.     

Heat shock pretreatment enhances porcine myoblasts survival after autotransplantation in intact skeletal muscle

Myoblast transplantation (MT) is a cell-based gene therapy treatment, representing a potential treat-ment for Duchenne muscular dystrophy (DMD), cardiac failure and muscle trauma. The rapid and mas-sive death of transplanted cells after MT is considered as a major hurdle which limits the efficacy of MT treatment. Heat shock proteins (HSPs) are overexpressed when cells undergo various insults. HSPs have been described to protect cells in vivo and in vitro against diverse insults. The aim of our study is to investigate whether HSP overexpression could increase myoblast survival after autotransplantation in pig intact skeletal muscle. HSP expression was induced by warming the cells at 42℃ for 1 h. HSP70 expression was quantified by Western blot and flow cytometry 24 h after the treatment. To investigate the myogenic characteristics of myoblasts, desmin and CD56 were analysed by Western blot and flow cytometry; and the fusion index was measured. We also quantified cell survival after autologous transplantation in pig intact skeletal muscle and followed cell integration. Results showed that heat shock treatment of myoblasts induced a significative overexpression of the HSP70 (P < 0.01) without loss of their myogenic characteristics as assessed by FACS and fusion index. In vivo (n=7), the myoblast survival rate was not significantly different at 24 h between heat shock treated and non- treated cells (67.69% ± 8.35% versus 58.79% ± 8.35%, P > 0.05). However, the myoblast survival rate in the heat shocked cells increased by twofold at 48 h (53.32% ± 8.22% versus 28.27% ± 6.32%, P < 0.01) and more than threefold at 120 h (26.33% ± 5.54% versus 8.79% ± 2.51%, P < 0.01). Histological analy-sis showed the presence of non-heat shocked and heat shocked donor myoblasts fused with host myoblasts. These results suggested that heat shock pretreatment increased the HSP70 expression in porcine myoblasts, and improved the survival rate after autologous transplantation. Therefore, heat shock pretreatment of myoblast in vitro is a simple and effective way to enhance cell survival after transplantation in pig. It might represent a potential method to overcome the limitations of MT treat-ment.     

Progress in the study of virus detection methods: The possibility of alternative methods to validate virus inactivation

Virus inactivation validation studies have been widely applied in the risk assessment of biogenic material-based medical products, such as biological products, animal tissue-derived biomaterials, and allogeneic biomaterials, to decrease the risk of virus transmission. Traditional virus detection methods in an inactivation validation study utilize cell culture as a tool to quantify the infectious virus by observing cytopathic effects (CPEs) after virus inactivation. However, this is susceptible to subjective factors because CPEs must be observed by experts under a microscope during virus titration. In addition, this method is costly and time- and labor-consuming. Molecular biological technologies such as quantitative polymerase chain reaction (qPCR) have been widely used for virus detection but cannot distinguish infectious and noninfectious viruses. Therefore, qPCR cannot be directly applied to virus inactivation validation studies. In this paper, methods to detect viruses and progress in the challenge of differentiating infectious and noninfectious viruses with the combination of pretreatment and qPCR techniques such as the integrated cell culture-qPCR (ICC-qPCR) method are reviewed. In addition, the advantages and disadvantages of each new method, as well as its prospect in virus inactivation validation studies, are discussed.     

Simultaneous saccharification and fermentation of lime-treated biomass

Simultaneous saccharification and fermentation (SSF) was performed on lime-treated switchgrass and corn stover, and oxidatively lime-treated poplar wood to determine their compatibility with Saccharomyces cerevisiae. Cellulose-derived glucose was extensively utilized by the yeast during SSF. The ethanol yields from pretreated switchgrass, pretreated corn stover, and pretreated-and-washed poplar wood were 72%, 62% and 73% of theoretical, respectively, whereas those from -cellulose were 67 to 91% of theoretical. The lower ethanol yields from treated biomass resulted from lower cellulose digestibilities rather than inhibitors produced by the pretreatment. Oxidative lime pretreatment of poplar wood increased the ethanol yield by a factor of 5.6, from 13% (untreated) to 73% (pretreated-and-washed).