Intracellular calcium release mediated by two muscarinic receptor subtypes

Four subtypes of muscarinic acetylcholine receptor (mAChR) were stably expressed in neuroblastoma-glioma hybrid cells (NG108-15). By combining fluorescent indicator dye (fura-2) studies with electrophysiological measurements it is shown that stimulation of mAChR I and mAChR III readily leads to release of calcium from intracellular stores and to associated conductance changes, whereas stimulation of mAChR II and mAChR IV exerts no such effect. Dose-response curves describing the amplitude or the delay of the calcium rise induced by acetylcholine suggest that the apparent affinity of mAChR III for its agonist is higher by about one order of magnitude than that of mAChR I. Ionic substitution experiments and current fluctuation analysis indicate that calcium activates a K⁺-specific conductance of ‘small’ single-channel amplitude similar to the SK type [1]. Furthermore, an outward current (M current) suppressed by activation of mAChR I and mAChR III has a single-channel amplitude corresponding to a conductance of approximately 3 pS.     

The uptake of liposome-entraped 125I-labelled poly(vinylpyrrolidone) by rat jejunum in vitro

The uptake of free and liposome-entrapped ¹²⁵I-labelled poly(vinylpyrrolidone) was measured in an intestinal sac preparation from adult rats. An an equal concentration of ¹²⁵I-labelled poly(vinylpyrrolidone), the rate of uptake of the liposome-entrapped material was four times that of the free macromolecule.     

Ascaris lumbricoides: succinate and tiglate in hemolymph

When hemolymph is taken from Ascaris lumbricoides at the time the worm is collected from pigs, it contains acetic, propionic, 2-methylbutyric, n-valeric, 2-methylvaleric, and succinic acid radicals; tiglic acid is absent.     

Specific localization of 2′,3′-cyclic nucleotide 3′-phosphohydrolase, (Ca2+/Mg2+)-ATPase,and acetylcholinesterase in human erythyrocyte membrane

A procedure was developed for the detection of 2′,3′-cyclic nucleotide 3′-phosphohydrolase in myelin. This assay was sufficiently sensitive to detect the low levels of 2′,3′-cyclic nucleotide 3′-phosphohydrolase in human erythrocytes. The 2′,3′-cyclic nucleotide 3′-phosphohydrolase of human erythrocytes was determined to be exclusively associated with the inner (cytosolic) side of the membrane. Leaky ghostsand resealed ghosts were assayed for 2′,3′-cyclic nucleotide 3′-phosphohydrolase, (Ca²⁺/Mg²⁺-ATPase, and acetylcholinesterase activity, and the 2′,3′-cyclic nucleotide 3′-phosphohydrolase profile is the same as that of the (Ca²⁺/Mg²⁺)-ATPase, an established inner membrane maker.     

How Can the Eco‐efficiency of a Region be Measured and Monitored?

The concept of eco-efficiency is commonly referred to as a business link to sustainable development. In this article, ecoefficiency is examined at a regional level as an approach to promoting the competitiveness of economic activities in the Finnish Kymenlaakso region and mitigating their harmful impacts on the environment. The aim is to develop appropriate indicators for monitoring changes in the eco-efficiency of the region. A starting point is to produce indicators for the environmental and economic dimensions of regional development and use them for measuring regional eco-efficiency. The environmental impact indicators are based on a life-cycle assessment method, producing different types of environmental impact indicators: pressure indicators (e.g., emissions of CO₂), impact category indicators (e.g., CO₂ equivalents in the case of climate change), and a total impact indicator (aggregating different impact category indicator results into a single value). Environmental impact indicators based on direct material input, total material input, and total material requirement of the Kymenlaakso region are also assessed. The economic indicators used are the gross domestic product, the value added, and the output of the main economic sectors of Kymenlaakso. In the eco-efficiency assessment, the economic and environmental impact indicators are monitored in the same graph. In a few cases eco-efficiency ratios can also be calculated (the economic indicators are divided by the environmental indicators). Output (= value added + intermediate consumption) is used as an economic indicator related to the environmental impact indicators, which also cover the upstream processes of the region's activities. In the article, we also discuss the strengths and weaknesses of using the different environmental impact indicators.     

Purification and characterization of α-glucosidases produced by Saccharomyces in response to three distinct maltose genes

α-Glucosidases or maltases (EC 3.2.1.20) were purified to electrophoretic homogeneity from a respective strain of Sacchromyces cerevisiae which carries a single MAL gene, either MALα, MALβ or MALγ, using gluconate-Sepharose affinity chromography and isoelectrofocusing. Of these maltases, two types of maltase were obtained from the MALγ strain, the pI values of which were 5.6 and 5.9. From the MALα and MALβ strain was obtained only one type of maltase with the pI at 5.6 which was identical to one of the maltases from the MALγ strain. These four maltases possessed the same properties, except for pI. They were monomers with molecular weights of between 66 000 and 67 000. With regard to the substrate specificity, they hydrolyzed maltose and sucrose exclusively but not α-methulglucoside nor maltooligosaccharide. They did not differ in immunological properties.     

Evaluation of four-dimensional cone beam computed tomography ventilation images acquired with two different linear accelerators at various gantry speeds using a deformable lung phantom

We evaluated four-dimensional cone beam computed tomography (4D-CBCT) ventilation images (VI_CBCT) acquired with two different linear accelerator systems at various gantry speeds using a deformable lung phantom.The 4D-CT and 4D-CBCT scans were performed using a computed tomography (CT) scanner, an X-ray volume imaging system (Elekta XVI) mounted in Versa HD, and an On-Board Imager (OBI) system mounted in TrueBeam. Intensity-based deformable image registration (DIR) was performed between peak-exhale and peak-inhale images. VI_CBCT- and 4D-CT-based ventilation images (VI_CT) were derived by DIR using two metrics: one based on the Jacobian determinant and one on changes in the Hounsfield unit (HU). Three different DIR regularization values (λ) were used for VI_CBCT. Correlations between the VI_CBCT and VI_CT values were evaluated using voxel-wise Spearman’s rank correlation coefficient (r).In case of both metrics, the Jacobian-based VI_CBCT with a gantry speed of 0.6 deg/sec in Versa HD showed the highest correlation for all the gantry speeds (e.g., λ = 0.05 and r = 0.68). Thus, the r value of the Jacobian-based VI_CBCT was greater or equal to that of the HU-based VI_CBCT. In addition, the ventilation accuracy of VI_CBCT increased at low gantry speeds.Thus, the image quality of VI_CBCT was affected by the change in gantry speed in both the imaging systems. Additionally, DIR regularization considerably influenced VI_CBCT in both the imaging systems. Our results have the potential to assist in designing CBCT protocols, incorporating VI_CBCT imaging into the functional avoidance planning process.