Estimation of Tissue Construction Cost from Heat of Combustion and Organic Nitrogen Content

Abstract. We present a method for estimating the construction costs of plant tissues from measurements of heat of combustion, ash content, and organic nitrogen content. The method predicts glucose equivalents, the amount of glucose required to provide carbon skeletons and reductant to synthesize a quantity of organic product. Glucose equivalents have previously been calculated from the elemental composition of tissue. We define construction cost as the amount of glucose required to provide carbon skeletons, reductant and ATP for synthesizing the organic compounds in a tissue via standard biochemical pathways. The fraction of the total construction cost of a compound or tissue (excluding costs of transporting compounds) that is reflected in its glucose equivalents is the biosynthetic efficiency ( E _B). This quantity varies between 0.84 and 0.95 for tissues with a wide range of compositions. Using the new method, total construction cost can be estimated to ± 6% of the value obtained from biochemical pathway analysis.
Construction costs of leaves of three chaparral species were estimated using the proposed method and compared to previously published values, derived using different methods. Agreement among methods was generally good. Differences were probably due to a combination of inaccuracy in the estimated biosynthetic efficiency and technical difficulties with biochemical analysis, one of the older methods of determining construction cost.     

Collagen peptides modulate the metabolism of extracellular matrix by human dermal fibroblasts derived from sun‐protected and sun‐exposed body sites

Clinical data published in recent years have demonstrated positive effects of collagen hydrolysate (CH) on skin aging clinical signs. CH use as food supplement has a long history; however, few studies have addressed the underlying purpose of CH on the cellular and molecular biology of skin cells that could elucidate clinical improvement findings. Wide diversity of characteristics has been reported for dermal fibroblasts derived from different body sites and it is unknown whether collagen peptides could modulate differently cells from chronological aged and photoaged skin areas. This study investigated the influence of CH on the extracellular matrix metabolism and proliferation of human dermal fibroblasts (HDFs) derived from chronological aged (sun‐protected) and photoaged (sun‐exposed) body sites. CH treatment did not affect cellular proliferation of either cell cultures, but notably modulated cell metabolism in monolayer model, increasing the content of dermal matrix precursor and main protein, procollagen I and collagen I, respectively. These effects were confirmed in the human dermal equivalent model. The increase in collagen content in the cultures was attributed to stimulation of biosynthesis and decreased collagen I metabolism through inhibition of metalloproteinase activity (MMP) 1 and 2. Modulation of CH in dermal metabolism did not differ between cells derived from sun‐protected and sun‐exposed areas, although lower concentrations of CH seemed to be enough to stimulate sun‐exposed‐derived HDFs, suggesting more pronounced effect in these cells. This study contributes to understanding the biological effects of CH on skin cells and viability of its use as a functional ingredient in food supplements.     

Phenological delay despite warming in wood frog Rana sylvatica reproductive timing: a 20-year study

Across all taxa, amphibians exhibit some of the strongest phenological shifts in response to climate change. As climates warm, amphibians and other animals are expected to breed earlier in response to temperature cues. However, if species use fixed cues such as daylight, their breeding timing might remain fixed, potentially creating disconnects between their life history and environmental conditions. Wood frogs Rana sylvatica are a cold-adapted species that reproduce in early spring, immediately after breeding ponds are free of ice. We used long-term surveys of wood frog oviposition timing in 64 breeding ponds over 20 yr to show that, despite experiencing a warming of 0.29°C per decade in annual temperature, wood frog breeding phenology has shifted later by 2.8 d since 2000 (1.4 d per decade; 4.8 d per °C). This counterintuitive pattern is likely the result of changes in the timing of snowpack accumulation and melting. Finally, we used relationships between climate and oviposition between 2000 and 2018 to hindcast oviposition dates from climate records to model longer-term trends since 1980. Our study indicates that species can respond to fine-grained seasonal climate heterogeneity within years that is not apparent or counterintuitive when related to annual trends across years.     

Modelling radiation fluxes in simple and complex environments—application of the RayMan model

The most important meteorological parameter affecting the human energy balance during sunny weather conditions is the mean radiant temperature T_mrt. It considers the uniform temperature of a surrounding surface giving off blackbody radiation, which results in the same energy gain of a human body given the prevailing radiation fluxes. This energy gain usually varies considerably in open space conditions. In this paper, the model ‘RayMan’, used for the calculation of short- and long-wave radiation fluxes on the human body, is presented. The model, which takes complex urban structures into account, is suitable for several applications in urban areas such as urban planning and street design. The final output of the model is, however, the calculated T_mrt, which is required in the human energy balance model, and thus also for the assessment of the urban bioclimate, with the use of thermal indices such as predicted mean vote (PMV), physiologically equivalent temperature (PET) and standard effective temperature (SET*). The model has been developed based on the German VDI-Guidelines 3789, Part II (environmental meteorology, interactions between atmosphere and surfaces; calculation of short- and long-wave radiation) and VDI-3787 (environmental meteorology, methods for the human-biometeorological evaluation of climate and air quality for urban and regional planning. Part I: climate). The validation of the results of the RayMan model agrees with similar results obtained from experimental studies.     

居群遗传结构研究中显性标记数据方法初探

为对比显性标记应用于居群遗传结构研究时不同统计参数的适用性,利用RAPD技术对中国5个居群的100个疣粒野生稻个体进行了遗传结构分析。在衡量居群遗传多样性水平时,多态位点比率（PPB）会低估遗传变异的量,其价值不如Shannon多样性指数和Nei基因多样性指数,而采用Nei指数时不必进行Lynch-Milligan矫正。对个体间遗传关系进行分析时,17种遗传相似性指数矩阵两两之间的Mantel检测都表现出极显著的相关性（r＞0.95,t＞t     

Evaluation and identification of hepatitis B virus entry inhibitors using HepG2 cells overexpressing a membrane transporter NTCP

Hepatitis B virus (HBV) entry has been analyzed using infection-susceptible cells, including primary human hepatocytes, primary tupaia hepatocytes, and HepaRG cells. Recently, the sodium taurocholate cotransporting polypeptide (NTCP) membrane transporter was reported as an HBV entry receptor. In this study, we established a strain of HepG2 cells engineered to overexpress the human NTCP gene (HepG2-hNTCP-C4 cells). HepG2-hNTCP-C4 cells were shown to be susceptible to infection by blood–borne and cell culture-derived HBV. HBV infection was facilitated by pretreating cells with 3% dimethyl sulfoxide permitting nearly 50% of the cells to be infected with HBV. Knockdown analysis suggested that HBV infection of HepG2-hNTCP-C4 cells was mediated by NTCP. HBV infection was blocked by an anti-HBV surface protein neutralizing antibody, by compounds known to inhibit NTCP transporter activity, and by cyclosporin A and its derivatives. The infection assay suggested that cyclosporin B was a more potent inhibitor of HBV entry than was cyclosporin A. Further chemical screening identified oxysterols, oxidized derivatives of cholesterol, as inhibitors of HBV infection. Thus, the HepG2-hNTCP-C4 cell line established in this study is a useful tool for the identification of inhibitors of HBV infection as well as for the analysis of the molecular mechanisms of HBV infection.     

3D‐Printed Cathodes of LiMn1−xFexPO4 Nanocrystals Achieve Both Ultrahigh Rate and High Capacity for Advanced Lithium‐Ion Battery

A 3D‐printing technology and printed 3D lithium‐ion batteries (3D‐printed LIBs) based on LiMn_0.21Fe_0.79PO₄@C (LMFP) nanocrystal cathodes are developed to achieve both ultrahigh rate and high capacity. Coin cells with 3D‐printed cathodes show impressive electrochemical performance: a capacity of 108.45 mAh g^?1 at 100 C and a reversible capacity of 150.21 mAh g^?1 at 10 C after 1000 cycles. In combination with simulation using a pseudo 2D hidden Markov model and experimental data of 3D‐printed and traditional electrodes, for the first time deep insight into how to achieve the ultrahigh rate performance for a cathode with LMFP nanocrystals is obtained. It is estimated that the Li‐ion diffusion in LMFP nanocrystal is not the rate‐limitation step for the rate to 100 C, however, that the electrolyte diffusion factors, such as solution intrinsic diffusion coefficient, efficiency porosity, and electrode thickness, will dominate ultrahigh rate performance of the cathode. Furthermore, the calculations indicate that the above factors play important roles in the equivalent diffusion coefficient with the electrode beyond a certain thickness, which determines the whole kinetic process in LIBs. This fundamental study should provide helpful guidance for future design of LIBs with superior electrochemical performance.     

Microcystins: Synthesis and structure–activity relationship studies toward PP1 and PP2A

Microcystins are highly toxic cyanotoxins responsible for plant, animal and human poisoning. Exposure to microcystins, mainly through drinkable water and contaminated food, is a current world health concern. Although it is quite challenging, the synthesis of these potent cyanotoxins, analogs and derivatives helps to evaluate their toxicological properties and to elucidate their binding mechanisms to their main targets Protein Phosphatase-1 (PP1) and -2A (PP2A). This review focuses on synthetic approaches to prepare microcystins and analogs and compiles structure–activity relationship (SAR) studies that describe the unique features of microcystins that make them so potent.     

Inverted meiosis and the evolution of sex by loss of complementation

Inverted meiosis, in which sister chromatids segregate before homologous chromosomes, is a common aberration of conventional meiosis (in which sister chromatids segregate after homologous chromosomes) and is routinely observed in certain species. This raises an evolutionary mystery: what is the adaptive advantage of the more common, conventional order of segregation in meiosis? I use a population genetic model to show that asexual mutants arising from inverted meiosis are relatively immune from the deleterious effects of loss of complementation (heterozygosity), unlike the asexual mutants arising from conventional meiosis, in which loss of complementation can outweigh the two‐fold cost of meiosis. Hence, asexual reproduction can replace sexual reproduction with inverted meiosis, but not with conventional meiosis. The results are in line with analogous considerations on other alternative types of reproduction and support the idea that amphimixis is stable in spite of the two‐fold cost of meiosis because loss of complementation in mutant asexuals outweigh the two‐fold cost.