Deep mutational scanning identifies SARS-CoV-2 Nucleocapsid escape mutations of currently available rapid antigen tests

1. Download : Download high-res image (239KB)
2. Download : Download full-size image

     

Accurate method for rapid biomass quantification based on specific absorbance of microalgae species with biofuel importance

The development of microalgae culture technology has been an integral part to produce biomass feedstock to biofuel production. Due to this, numerous attempts have been made to improve some operational parameters of microalgae production. Despite this, specialized research in cell growth monitoring, considered as a fundamental parameter to achieve profitable applications of microalgae for biofuels production, presents some opportunity areas mainly related to the development of specific and accurate methodologies for growth monitoring. In this work, predictive models were developed through statistical tools that correlate a specific micro-algal absorbance with cell density measured by cell count (cells∙per ml), for three species of interest for biofuels production. The results allow the precise prediction of cell density through a logistic model based on spectrophotometry, valid for all the kinetics analysed. The adjusted determination coefficients () for the developed models were 0·993, 0·995 and 0·994 for Dunaliella tertiolecta, Nannochloropsis oculata and Chaetoceros muelleri respectively. The results showed that the equations obtained here can be used with an extremely low error (≤2%) for all the cell growth ranges analysed, with low operational cost and high potential of automation. Finally, a user-friendly software was designed to give practical use to the developed predictive models.     

Inhibition of cyclic AMP dependent protein kinase by vanadyl sulfate

Vanadium salts influence the activities of a number of mammalian enzymes in vitro but the mechanisms by which low concentrations of vanadium ameliorate the effects of diabetes in vivo remain poorly understood. The hypothesis that vanadium compounds act by inhibiting protein tyrosine phosphatases has attracted most support. The studies described here further evaluate the possibility that vanadyl sulfate trihydrate (VS) can also inhibit 3′,5′-cyclic adenosine monophosphate (cAMP) dependent protein kinase (PKA). Using conventional assay conditions, VS inhibited PKA only at high concentrations (IC₅₀>400 μM); however, PKA inhibition was seen at dramatically lower concentrations of VS (IC₅₀<10 μM) when sequestration of vanadyl ions was minimized. Vanadyl appears to be the effective PKA inhibitor because sodium orthovanadate did not inhibit PKA and inhibition by vanadyl was abolished by potential chelators such as ethylenediaminetetraacetic acid or glycyl peptides. PKA inhibition by vanadyl appears to be mixed rather than strictly competitive or uncompetitive and may replicate the inhibitory effects of high concentrations of Mg²⁺. The effect of vanadyl on PKA provides a possible explanation for the effects of vanadium salts on fat tissue lipolysis and perhaps on other aspects of energy metabolism that are controlled by cAMP-dependent mechanisms. Considering the high degree of conservation of the active sites of protein kinases, vanadyl may also influence other members of this large protein family. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

科码嘉培养基在病原微生物分离中的应用

为了快速、准确检测各种致病菌,为疾病诊疗赢得时间,有效地控制疾病和疫情的发生、发展,利用传统分离培养基和显色培养基同时检测样品,得出检测样品阳性率。科码嘉显色培养基比传统分离培养基省时、省力,阳性率高。科码嘉显色基制备简单、使用方便,缩短检验周期,提高了检测率。     

Rapid screenhouse assessment of bacterial blight in cassava genotypes in Nigeria

Bacterial blight disease caused by Xanthomonas axonopodis pv. manihotis (Berthet-Bondar) Dye was assessed in 11 artificially inoculated cassava genotypes in a screenhouse. Disease progress was estimated at intervals of 3 days by measuring the length of necrotic lesions on stems and leaves, as well as estimating the average disease score and area under disease progress curve (AUDPC). Based on the average disease scores, cassava genotypes 30572, TME 1, TME 7 and TME 9 were classified as resistant to bacterial blight, genotypes 4(2)1425, TME 2, TME 4 and TME 12 were tolerant while cassava genotypes 30001, TME 3, and TME 28 were susceptible. Direct correlations, statistically significant at p < 0.05, were obtained between stem necrosis, leaf necrosis, average disease scores and AUDPC in the 11 cassava genotypes. Screenhouse experiments afford rapid assessment of resistance status of cassava genotypes to bacterial blight in Nigeria.     

Antioxidation and Tyrosinase Inhibition of Polyphenolic Curcumin Analogs

A series of polyphenolic curcumin analogs were synthesized and their inhibitory effects on mushroom tyrosinase and the inhibition of 1,1-diphenyl-2-picryl-hydrazyl (DPPH) free radical formation were evaluated. The results indictated that the analogs possessing m-diphenols and o-diphenols exhibited more potent inhibitory activity on tyrosinase than reference compound rojic acid, and that the analogs with o-diphenols exhibited more potent inhibitory activity of DPPH free-radical formation than reference compound vitamin C. The inhibition kinetics, analyzed by Lineweaver–Burk plots, revealed that compounds B₂ and C₂ bearing o-diphenols were non-competitive inhibitors, while compounds B₁₁ and C₁₁ bearing m-diphenols were competitive inhibitors. In particular, representative compounds C₂ and B₁₁ showed no side effects at a dose of 2,000 mg/kg in a preliminary evaluation of acute toxicity in mice. These results suggest that such polyphenolic curcumin analogs might serve as lead compounds for further design of new potential tyrosinase inhibitors.     

Understanding the genetic basis of invasiveness

Invasive species provide excellent study systems to evaluate the ecological and evolutionary processes that contribute to the colonization of novel environments. While the ecological processes that contribute to the successful establishment of invasive plants have been studied in detail, investigation of the evolutionary processes involved in successful invasions has only recently received attention. In particular, studies investigating the genomic and gene expression differences between native and introduced populations of invasive species are just beginning and are required if we are to understand how plants become invasive. In the current issue of Molecular Ecology, Hodgins et al. ( 2013 ) tackle this unresolved question, by examining gene expression differences between native and introduced populations of annual ragweed, Ambrosia artemisiifolia. The study identifies a number of potential candidate genes based on gene expression differences that may be responsible for the success of annual ragweed in its introduced range. Furthermore, genes involved in stress response are over‐represented in the differentially expressed gene set. Future experiments could use functional studies to test whether changes in gene expression at these candidate genes do in fact underlie changes in growth characteristics and reproductive output observed in this and other invasive species.     

A novel rapid prototyping and finite element method-based development of the patient-specific temporomandibular joint implant

Objective: The objective of this study was to fabricate a successful implant for temporomandibular joint (TMJ) disorder patients who could not be treated through conventional surgeries.

Methods: A custom-made implant was fabricated using rapid prototyping (RP) for the TMJ surgery. The stability of the metallic implant was validated using a finite element analysis.

Results: The results of finite elements were stable and the design of the TMJ implant was suitable as per the patient's need. The customised implant was made using a fused deposition modelling method of RP and a vertical machining centre. The implant has provided normal jaw function for over 2 years since surgery.

Conclusions: The approach utilised will be helpful in providing successful treatment to the deformed mandible and the mandible joints. This method allows to customise and to accurately fabricatie the implant. Advantages of this approach are that the physical model of the implant was tested for stability before the implantation, the surgeon can plan and rehearse the surgery in advance, it is a less invasive and less time-consuming surgical procedure.     

Incorporation of dimethoxycurcumin into charged liposomes and the formation kinetics of fractal aggregates of uncharged vectors

Abstract

Dimethoxycurcumin (DMC) is a lipophilic analog of curcumin found in Curcuma longa Linn., which is known to possess significant activity against various cancer cell lines. The purpose of this study was to develop suitable liposomal formulations in order to overcome DMC’s poor water solubility and to study the aggregation kinetic profile using the fractal analysis. DMC was incorporated into liposomal formulations composed of DPPC, DPPC:DPPG:chol (9:1:1 molar ratio) and DPPC:DODAP:chol (9:1:1 molar ratio) liposomes. Light scattering techniques were used to elucidate the physicochemical parameters of the liposomal formulations with and without DMC. The structural characteristics of the incorporated molecule were found to be crucial and promote the aggregation mechanism depending also on the liposomes’ composition. The results of our study contribute to the overall scientific efforts to prepare efficient carriers for DMC and could be a useful tool in order to study more efficiently the kinetics of the aggregation process of the liposomal carriers.