Redox conditions for stimulation of in vitro folding and assembly of the glycoprotein hormone chorionic gonadotropin

The formation of native disulfide bonds during in vitro protein folding can be limiting in obtaining biologically active proteins. Thus, optimization of redox conditions can be critical in maximizing the yield of renatured, recombinant proteins. We have employed a folding model, that of the beta subunit of human chorionic gonadotropin (hCG- beta), to investigate in vitro oxidation conditions that facilitate the folding of this protein, and have compared the in vitro rates obtained with the rate of folding that has been observed in intact cells. Two steps in the folding pathway of hCG-beta were investigated: the rate-limiting events in the folding of this protein, and the assembly of hCG-beta with, hCG-alpha. The rates of these folding events were determined with and without protein disulfide isomerase (PDI) using two different types of redox reagents: cysteamine and its oxidized equivalent, cystamine, and reduced and oxidized glutathione. Rates of the rate-limiting folding events were twofold faster in cysteamine/cystamine redox buffers than in glutathione buffers in the absence of PDI. Optimal conditions for hCG-beta folding were attained in a 2 mM glutathione buffer, pH 7.4, that contained 1 mg/mL PDI and in 10muM cysteamine/cystamine, pH 8.7, without PDI. Under these conditions, the half-time of the ratelimiting folding event was 16 to 20 min and approached the rate observed in intact cells (4 to 5 min). Moreover, folding of the beta subunit under these conditions yields a functional protein, based on its ability to assemble with the alpha subunit. The rates of assembly of hCG-beta with hCG-alpha in the cysteamine/cystamine or glutathione/PDI redox buffers were comparable (t(1/2/sb> = 9 to 12 min)). These studies show that rates of folding and assembly events that involve disulfide bond formation can be optimized by a simple buffer system composed of cysteamine and cystamine. (c) 1994 John Wiley & Sons, Inc.     

Hormone- and growth factor-stimulated NADH oxidase

An NADH oxidase activity of animal and plant plasma membrane is described that is stimulated by hormones and growth factors. In plasma membranes of cancer cells and tissues, the activity appears to be constitutively activated and no longer hormone responsive. With drugs that inhibit the activity, cells are unable to grow although growth inhibition may be more related to a failure of the cells to enlarge than to a direct inhibition of mitosis. The hormone-stimulated activity in plasma membranes of plants and the constitutively activated NADH oxidase in tumor cell plasma membranes is inhibited by thiol reagents whereas the basal activity is not. These findings point to a thiol involvement in the action of the activated form of the oxidase. NADH oxidase oxidation by Golgi apparatus of rat liver is inhibited by brefeldin A plus GDP. Brefeldin A is a macrolide antibiotic inhibitor of membrane trafficking. A model is presented where the NADH oxidase functions as a thiol-disulfide oxidoreductase activity involved in the formation and breakage of disulfide bonds. The thiol-disulfide interchange is postulated as being associated with physical membrane displacement as encountered in cell enlargement or in vesicle budding. The model, although speculative, does provide a basis for further experimentation to probe a potential function for this enzyme system which, under certain conditions, exhibits a hormone- and growth factor-stimulated oxidation of NADH.     

The disulfide bridges of the immunoglobulin-like domains of FcγRIIIB are essential for efficient expression and biological activity

The immunoglobulin G receptor FcRIIIB belongs to the immunoglobulin superfamily as two extracellular domains show homology to the immunoglobulin domains. Since some residues in these domains, such as the two cysteines, are supposed to form an intrachain disulfide bridge are so commonly conserved, they may be of importance for correct folding. Site-directed mutagenesis and expression in BHK21 confirmed this supposition for the FcRIIIB. Replacing both cysteines in the first and/or second domain by serines reduced the surface expression level by 50%, whereas the ligand binding capability was 20–30% of that seen in cells expressing the wild-type receptor. Replacing one of the four cysteines resulted in the loss of surface expression. Exchanging the conserved tryptophan in the first domain by phenylalanine only slightly affected the ligand binding (25%), whereas the surface expression remained unchanged.     

Photostabilized titanium dioxide and a fluorescent brightener as adjuvants for a nucleopolyhedrovirus

Titanium dioxide (TiO₂)reflects ultraviolet light, and so could beexpected to protect the occlusion bodies (OBs)of nucleopolyhedroviruses (NPVs) fromdegradation by sunlight. However, in thepresence of sunlight and water, TiO₂catalyzes the formation of hydrogen peroxide,which can degrade OBs. We tested microfineTiO₂ that had been photostabilized(particles were coated to prevent catalyticactivity), as a UV protectant for the OBs ofthe NPV of Helicoverpa zea (Boddie). Inthe absence of UV, activity of the OBs wasreduced by nonphotostabilized TiO₂ but wasunaffected by photostabilized TiO₂ or byzinc oxide (ZnO). None of these materialsinfluenced larval feeding rates. Undersimulated sunlight, photostabilizedTiO₂ protected the OBs to a greater degreethan did ZnO. Photostabilized TiO₂ wascompatible with a viral enhancer, thefluorescent brightener Blankophor HRS. Undersimulated sunlight, both materials increasedactivity of the OBs, relative to OBs withneither material, in a largely additive manner. In bioassays of foliage collected from fieldplots of lima bean plants sprayed with OBs withor without one or both of these materials,TiO₂ increased persistence of the OBs, butBlankophor HRS had no significant effect.     

Denaturation and unfolding of human anaphylatoxin C3a: an unusually low covalent stability of its native disulfide bonds

The complement C3a anaphylatoxin is a major molecular mediator of innate immunity. It is a potent activator of mast cells, basophils and eosinophils and causes smooth muscle contraction. Structurally, C3a is a relatively small protein (77 amino acids) comprising a N-terminal domain connected by 3 native disulfide bonds and a helical C-terminal segment. The structural stability of C3a has been investigated here using three different methods: Disulfide scrambling; Differential CD spectroscopy; and Reductive unfolding. Two uncommon features regarding the stability of C3a and the structure of denatured C3a have been observed in this study. (a) There is an unusual disconnection between the conformational stability of C3a and the covalent stability of its three native disulfide bonds that is not seen with other disulfide proteins. As measured by both methods of disulfide scrambling and differential CD spectroscopy, the native C3a exhibits a global conformational stability that is comparable to numerous proteins with similar size and disulfide content, all with mid-point denaturation of [GdmCl]_1/2 at 3.4-5 M. These proteins include hirudin, tick anticoagulant protein and leech carboxypeptidase inhibitor. However, the native disulfide bonds of C3a is 150-1000 fold less stable than those proteins as evaluated by the method of reductive unfolding. The 3 native disulfide bonds of C3a can be collectively and quantitatively reduced with as low as 1 mM of dithiothreitol within 5 min. The fragility of the native disulfide bonds of C3a has not yet been observed with other native disulfide proteins. (b) Using the method of disulfide scrambling, denatured C3a was shown to consist of diverse isomers adopting varied extent of unfolding. Among them, the most extensively unfolded isomer of denatured C3a is found to assume beads-form disulfide pattern, comprising Cys³⁶-Cys⁴⁹ and two disulfide bonds formed by two pair of consecutive cysteines, Cys²²-Cys²³ and Cys⁵⁶-Cys⁵⁷, a unique disulfide structure of polypeptide that has not been documented previously.     

Chaperone-mediated refolding of recombinant prochymosin

It has been verified that prochymosin is characterized by a two-stage refolding: dilution of unfolded protein into pH 11 buffer followed by neutralization at pH 8; the high-pH step is indispensable. Here we demonstrate that one-stage refolding around pH 8 can be achieved when GroE or 10-fold molar excess (rather than catalytic concentration) of protein disulfide isomerase (PDI) over prochymosin is present. The helping effect varies with the oxidation states of prochymosin. GroE and PDI increase the reactivation of the unfolded, partially reduced and the unfolded, oxidized prochymosin from 5% to 40% and from 50% to 100%, respectively. For the unfolded and fully reduced prochymosin, GroE does not have a positive effect, whereas PDI promotes renaturation from 2% to 28%. Based on our previous and present observations, we propose that at pH 8 there may be two kinds of incorrect interactions within and between prochymosin polypeptides leading to unproductive pathways: one prevents disulfide rearrangement, which can be avoided by high pH; the other interferes with acquisition of native conformation, which can be relieved by GroE and PDI.     

Atomic Layer Deposition of CdS Quantum Dots for Solid‐State Quantum Dot Sensitized Solar Cells

Functioning quantum dot (QD) sensitized solar cells have been fabricated using the vacuum deposition technique atomic layer deposition (ALD). Utilizing the incubation period of CdS growth by ALD on TiO₂, we are able to grow QDs of adjustable size which act as sensitizers for solid‐state QD‐sensitized solar cells (ssQDSSC). The size of QDs, studied with transmission electron microscopy (TEM), varied with the number of ALD cycles from 1‐10 nm. Photovoltaic devices with the QDs were fabricated and characterized using a ssQDSSC device architecture with 2,2',7,7'‐tetrakis‐(N,N‐di‐p methoxyphenylamine) 9,9'‐spirobifluorene (spiro‐OMeTAD) as the solid‐state hole conductor. The ALD approach described here can be applied to fabrication of quantum‐confined structures for a variety of applications, including solar electricity and solar fuels. Because ALD provides the ability to deposit many materials in very high aspect ratio substrates, this work introduces a strategy by which material and optical properties of QD sensitizers may be adjusted not only by the size of the particles but also in the future by the composition.     

Oxygen‐Deficient Blue TiO2 for Ultrastable and Fast Lithium Storage

Developing a titanium dioxide (TiO₂)‐based anode with superior high‐rate capability and long‐term cycling stability is important for efficient energy storage. Herein, a simple one‐step approach for fabricating blue TiO₂ nanoparticles with oxygen vacancies is reported. Oxygen vacancies can enlarge lattice spaces, lower charge transfer resistance, and provide more active sites in TiO₂ lattices. As a result, this blue TiO₂ electrode exhibits a highly reversible capacity of 50 mAh g^?1 at 100 C (16 800 mA g^?1) even after 10 000 cycles, which is attributable to the combination of surface capacitive process and remarkable diffusion‐controlled insertion revealed by the kinetic analysis. The strategy of employing oxygen‐deficient nanoparticles may be extended to the design of other robust semiconductor materials as electrodes for energy storage.     

Soluble Oligomers of the Pore-forming Toxin Cytolysin A from Escherichia coli Are Off-pathway Products of Pore Assembly

The α-pore-forming toxin Cytolysin A (ClyA) is responsible for the hemolytic activity of various Escherichia coli and Salmonella enterica strains. Soluble ClyA monomers spontaneously assemble into annular dodecameric pore complexes upon contact with membranes or detergent. At ClyA monomer concentrations above ∼100 nm, the rate-limiting step in detergent- or membrane- induced pore assembly is the unimolecular reaction from the monomer to the assembly-competent protomer, which then oligomerizes rapidly to active pore complexes. In the absence of detergent, ClyA slowly forms soluble oligomers. Here we show that soluble ClyA oligomers cannot form dodecameric pore complexes after the addition of detergent and are hemolytically inactive. In addition, we demonstrate that the natural cysteine pair Cys-87/Cys-285 of ClyA forms a disulfide bond under oxidizing conditions and that both the oxidized and reduced ClyA monomers assemble to active pores via the same pathway in the presence of detergent, in which an unstructured, monomeric intermediate is transiently populated. The results show that the oxidized ClyA monomer assembles to pore complexes about one order of magnitude faster than the reduced monomer because the unstructured intermediate of oxidized ClyA is less stable and dissolves more rapidly than the reduced intermediate. Moreover, we show that oxidized ClyA forms soluble, inactive oligomers in the absence of detergent much faster than the reduced monomer, providing an explanation for several contradictory reports in which oxidized ClyA had been described as inactive.