Ruptured fission yeast walls

Distributions of rupture sites of fission yeast cells ruptured by glass beads have been related to a new morphometric analysis. As shown previously (Johnson et al.,Cell Biophysics, 1995), ruptures were not randomly distributed nor was their distribution dictated by geometry, rather, ruptures at the extensile end were related to cell length just as the rate of extension is related to cell length. The extension patterns of early log, mid-log, late log, and stationary phase cells from suspension cultures were found to approximate the linear growth patterns of Kubitschek and Clay (1986). The median length of cells was found to decline through the log phase in an unbalanced manner.     

Dictyosome vesicle production and plasma membrane turnover in auxin-stimulated outer epidermal cells of coleoptile segments fromAvena sativa (L.)

Summary Dark grown coleoptile segments were floated on solutions of IAA alone and of IAA and the secretion inhibitors cytochalasin and monensin. The secretion inhibitors prevented normal elongation of the tissue segments, the monensin inhibition being virtually complete while cytochalasin gave a 40% reduction over the first six hours with little further further elongation in the following 18 hours. Vesicle production was assessed in outer epidermal cells after 6 hours of IAA-stimulated elongation using the vesicle accumulation method following a cytochalasin-block of vesicle transport. The results were compared with the area of plasma membrane required to enable cell elongation to proceed at the observed rate. The area of vesicle membrane delivered to the cell surface exceeded this requirement to such an extent that at least 65% of the delivered membrane must be recycled back into the cytoplasm. Expressed in terms of the whole cell, the plasma membrane turnover rate was found to be once every 200 minutes. It is concluded that limitation of elongation by secretion inhibitors is more likely to reflect a requirement for the vesicle contents than the vesicle membrane. These results are compared with those obtained from other secretory systems using a similar approach.Abbreviations IAA indole acetic acid - DMSO dimethyl sulphoxide - D dictyosome - ER endoplasmic reticulum - V vesicle     

Analysis of parameters about useful life extension in 70 tools and methods related to eco-design and circular economy

One of the approaches followed by the circular economy (CE) to achieve sustainability through design is product life extension. Extending the life of products to make them useful for as long as possible is a means to reduce waste production and materials consumption, as well as the related impacts. For designers, conceptualizing products in a way that allows them to be used for longer is a challenge, and assessing how well they extend their lifespan can be helpful when it comes to choosing the best proposal. In this paper, 70 tools and methods related to eco-design and circular economy are studied to determine how many of them consider parameters related to life extension and which can be applied in the early stages of design. The results of the analysis show that most of the existing tools and methods are applicable to developed products, and only a few of them take into account parameters related to extending the useful life. Of the 70 tools and methods, only 14 include some parameter related to life extension and are applicable to concepts. CE toolkit, Eco-design PILOT, CE Designer, Circularity Assessment tool, Circularity Potential Indicator and Circular Design Tools take into consideration eight or more parameters to assess life extension in concepts. This will help designers select the most appropriate and will indicate the need for more complete tools to consider useful life extension in the early stages of design and thus enhance the selection of more sustainable products.     

THE EFFECTS OF BACK EXTENSION TRAINING ON BACK MUSCLE STRENGTH AND SPINAL RANGE OF MOTION IN YOUNG FEMALES

The objective of this study was to determine the effects of a 10-week dynamic back extension training programme and its effects on back muscle strength, back muscle endurance and spinal range of motion (ROM) for healthy young females. Seventy-three young females (age: 19.32±1.80 years, height: 158.89±4.71 cm, body weight: 55.67±6.30 kg) volunteered for the study. Prior to the training period, all participants completed anthropometric measurements, back muscle strength and endurance test, lateral bending and spinal ROM measurements. After measurements, the participants were divided into two groups. The exercise group (N:35) performed the dynamic back extension exercise 3 days per week for 10 weeks. The control group (N:38) did not participate in any type of exercise. The mixed design ANOVA (group x time) was used to determine the difference in pre- and post-training values. The present findings show that there were significant differences between pre-training and post-training values for back muscle strength and spinal ROM in the exercise group. Following the dynamic strength training programme, back muscle strength and spine ROM values except flexion of the lumbar 5-sacrum 1 (L5-S1) segment of the exercise group showed a significant increase when compared with the pre test values. The control group did not show any significant changes when compared with the pre-training values. The results demonstrate that the 10-week dynamic strength training programme was effective for spinal extension ROM and back muscle strength, but there was no change in back muscle endurance. In this context, this programme could potentially be used to prevent the decrease of spinal ROM as well as provide an increase in the fitness parameters of healthy individuals.     

The use of whole genome amplification in the study of human disease

The availability of large amounts of genomic DNA is of critical importance for many of the molecular biology assays used in the analysis of human disease. However, since the amount of patient tissue available is often limited and as particular foci of interest may consist of only a few hundred cells, the yield of DNA is often insufficient for extensive analysis. To address this problem, several whole genome amplification (WGA) methodologies have been developed. Initial WGA approaches were based on the polymerase chain reaction (PCR). However, recent reports have described the use of non-PCR-based linear amplification protocols for WGA. Using these methods, it is possible to generate microgram quantities of DNA starting with as little as 1mg of genomic DNA. This review will provide an overview of WGA approaches and summarize some of the uses for amplified DNA in various high-throughput genetic applications.     

Characterization of the Grp94/OS-9 Chaperone–Lectin Complex

Grp94 is a macromolecular chaperone belonging to the hsp90 family and is the most abundant glycoprotein in the endoplasmic reticulum (ER) of mammals. In addition to its essential role in protein folding, Grp94 was proposed to participate in the ER-associated degradation quality control pathway by interacting with the lectin OS-9, a sensor for terminally misfolded proteins. To understand how OS-9 interacts with ER chaperone proteins, we mapped its interaction with Grp94. Glycosylation of the full-length Grp94 protein was essential for OS-9 binding, although deletion of the Grp94 N-terminal domain relieved this requirement suggesting that the effect was allosteric rather than direct. Although yeast OS-9 is composed of a well-established N-terminal mannose recognition homology lectin domain and a C-terminal dimerization domain, we find that the C-terminal domain of OS-9 in higher eukaryotes contains “mammalian-specific insets” that are specifically recognized by the middle and C-terminal domains of Grp94. Additionally, the Grp94 binding domain in OS-9 was found to be intrinsically disordered. The biochemical analysis of the interacting regions provides insight into the manner by which the two associate and it additionally hints at a plausible biological role for the Grp94/OS-9 complex.     

基于PIPE现象的质粒克隆位点序列设计与功能评价

分子克隆是现代生物学研究的核心技术之一,是基因工程、蛋白质工程中的重要手段。为提高分子克隆实验的操作效率,本研究设计并合成基于聚合酶引物不完全延伸（polymerase incomplete primer extension,PIPE）现象的质粒克隆位点序列。并以此为基础统一相关引物的设计方案,避免传统酶切--连接法中需针对不同载体MCS序列设计不同引物的缺点。该方案利用13 bp定长接头序列,在同一体系中使用2对引物、2种线性化模板同时扩增载体和插入片段,通过20个循环,在1次PCR过程中即合成可供转化使用的带缺口质粒产物。在NEB Q5酶系统中,利用此法将3种荧光素酶序列插入pET-15b及pET-21b(+)载体,均获得成功。且利用商品化感受态细胞（转化效率 > 5×108 cfu/μg）转化后所获得转化子数量均在300个以上,其中含插入片段的阳性克隆比例可达85%以上。基于本方案的设计及作用原理,可将其应用于10 kb以内载体和插入片段的快速重组。且具有通用性强、耗时少、阳性克隆得率高和成本低等优点,是传统DNA重组方法的有益补充,可作为各实验室的常规分子克隆手段之一。     

Preimplantation genetic diagnosis of β-thalassemia using real-time polymerase chain reaction with fluorescence resonance energy transfer hybridization probes

Preimplantation genetic diagnosis (PGD) is employed increasingly to allow transfer of embryos to the uterus in assisted reproduction procedures. There are three stages of biopsy: polar bodies, one or two blastomeres from the cleavage-stage embryos, and trophectoderm cells (∼5 cells) from the blastocyst-stage embryos. Validation of polymerase chain reaction (PCR)-based assays are challenging because only limited genetic material can be obtained for PGD. In the current study, we modified a valid single-cell PCR protocol for PGD using real-time PCR assay with fluorescence resonance energy transfer (FRET) hybridization probes followed by melting curve analysis. We optimized and clinically applied the protocol, permitting molecular genetic analysis to amplify a specific region on the beta-globin (HBB) gene for a couple, carriers of two mutations: c.-78A>G and c.52A>T. Among a total of eight embryos obtained after ovarian stimulation, a single blastomere per embryo at the six- to eight-cell stage was biopsied. This PGD method showed that four embryos were unaffected, two embryos were selected for transfer, and one pregnancy was achieved. Finally, a healthy male baby was delivered at 38 weeks’ gestation. The results obtained using the new method, FRET hybridization probes, were compared with findings using an existing method, primer extension minisequencing.     

Duplications between direct repeats stabilized by DNA secondary structure occur preferentially in the leading strand during DNA replication

To ascertain a leading or lagging strand preference for duplication mutations, several short DNA sequences, i.e. mutation inserts, were designed that should demonstrate an asymmetric propensity for duplication mutations in the two complementary DNA strands during replication. The design of the mutation insert involved a 7-bp quasi inverted repeat that forms a remarkably stable hairpin in one DNA strand, but not the other. The inverted repeat is asymmetrically placed between flanking direct repeats. This sequence was cloned into a modified chloramphenicol acetyltransferase (CAT) gene containing a −1 frameshift mutation. Duplication of the mutation insert restores the reading frame of the CAT gene resulting in a chloramphenicol resistant phenotype. The mutation insert showed greater than a 200-fold preference for duplication mutations during leading strand, compared with lagging strand, replication. This result suggests that misalignment stabilized by DNA secondary structure, leading to duplication between direct repeats, occurred preferentially during leading strand synthesis.