Coordination polymers of Ln(III): Synthesis, characterization, catalytic and antimicrobial aspects

Coordination polymers of HEAP-ED with La(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III) and Dy(III) metal ions have been synthesized and characterized by elemental analyses, electronic spectra, magnetic susceptibilities, FTIR, NMR, scanning electronic microscopy (SEM) and thermogravimetric analyses. Catalytic activity of selected coordination polymers was examined for pharmaceutical important organic synthesis. Antimicrobial activity of isolated Ln(III) coordination polymers against Escherichia coli, Bacillus subtilis, Staphylococcus aureus (bacteria) and Saccharomyces cerevisiae (yeast) were measured. It was observed from the study that the Ln(III) coordination polymers acted as an efficient and effective catalysts and antimicrobial agents.     

Mode of action of a surfactant–polymer formulation to support performance of the entomopathogenic nematode Steinernema carpocapsae for control of diamondback moth larvae (Plutella xylostella)

The use of entomopathogenic nematodes on cabbage leaves against larvae of the diamondback moth (DBM) Plutella xylostella requires the addition of formulation adjuvants to achieve satisfying control. Without adjuvants nematodes settle in the tank mix of backpack sprayers causing uneven distribution. The polymers arabic and guar gum, alginate and xanthan were used in concentrations between 0.05 and 0.3% to retard sedimentation of Steinernema carpocapsae. Arabic gum had no effect, guar gum prevented sedimentation at 0.3% but the effect dropped significantly at lower concentration. At 0.05%, xanthan prevented nematode sedimentation better than alginate. Deposition of nematodes on the leaves was significantly increased by the addition of any of the polymers. Spraying nematodes on leaves with an inclination of 45° without the addition of any formulation resulted in 70% run-off. Adding 0.2% alginate or xanthan reduced the losses to <20%. The use of a surfactant–polymer formulation significantly reduced defoliation by DBM larvae. Visual examinations provided evidence that nematodes are not ingested by DBM larvae. Invasion of S. carpocapsae is an active process via the anus. The function of the formulation is not to prolong nematode survival, but to provide environmental conditions which enable rapid invasion of the nematodes. Nematode performance was improved by selection of the best surfactant in combination with xanthan and by optimisation of the concentrations of the surfactant Rimulgan® and the polymer xanthan. The best control results were achieved with Rimulgan® at 0.3% together with 0.3% xanthan, causing DBM mortality of >90% at 80% relative humidity and >70% at 60%. The formulation lowered the LC₅₀ from 12 to 1 nematode/larva. The viscosity of the surfactant–polymer formulations correlated well with nematode efficacy, prevention of sedimentation and adherence to the leave. This physical parameter can therefore be recommended for improvement of nematode formulations to be used for foliar application against DBM.     

Hidden smectic properties of a chiral side-chain co-oligomer

We recently showed that a side-chain industrial co-oligosiloxane presents a quenchable enlarged blue phase behaviour at the cholesteric-isotropic phase transition. In this paper, we present the results of a structural study based on X-ray diffraction, differential scanning calorimetry and optical measurements. In particular, the smectic A organisation is demonstrated in the lower temperature domain, which was hitherto understood as a cholesteric phase. A structural model for this phase is proposed on the basis of the analysis of the anisotropic scattering of stretched fibers. Our results also suggest that the observed glass transition is indeed a rather complex phenomenon, which seems to involve not only the freezing of the main chains, but also smectic correlations at the side-chain level. Moreover, the calorimetric study indicates that, notwithstanding the conservation of the processed film's optical properties, low kinetic reorganisations occur at room temperature.     

Preparations of immobilized lysozyme with reversibly soluble polymer for hydrolysis of microbial cells

Hen egg white lysozyme was immobilized by carbodiimide method to form amide bonds with a polymer (AS-L) showing reversibly soluble-insoluble characteristics with pH change. The immobilized enzyme (LY-AS) was soluble above pH 6 and precipitate below pH 4.5, offering advantages in that it can carry out hydrolysis of microbial cells in a soluble form yet be recovered after precipitation at low pH. The maximum specific activity of LY-AS was 66% of that of free lysozyme with M. lysodeikticus cells as substrate, which is much higher than the values reported in the literature using water-insoluble materials as carriers. The effects of pH and temperature on the activity of LY-AS were studied and compared with those of free lysozyme. With repeated pH cycles between 6.6 and 4.5, the operation half-life of immobilized enzyme activity was nine cycles. Repeated batch lysis of microbial cells could be carried out with intermittent enzyme precipitation and recovery steps. In such an operation the insoluble residual cells should be recovered together with the immobilized enzyme to minimize enzyme loss arising from adsorption to cells.     

A Durable Alternative for Proton‐Exchange Membranes: Sulfonated Poly(Benzoxazole Thioether Sulfone)s

To develop a durable proton‐exchange membrane (PEM) for fuel‐cell applications, a series of sulfonated poly(benzoxazole thioether sulfone)s ( SPTESBOs) are designed and synthesized, with anticipated good dimensional stability (via acid–base cross linking), improved oxidative stability against free radicals (via incorporation of thioether groups), and enhanced inherent stability (via elimination of unstable end groups) of the backbone. The structures and the degree of sulfonation of the copolymers are characterized using Fourier‐transform infrared spectroscopy, and nuclear magnetic resonance spectroscopy (¹H NMR and ¹⁹F NMR). The electrochemical stabilities of the monomers are examined using cyclic voltammetry in a typical three‐electrode cell configuration. The physicochemical properties of the membranes vital to fuel‐cell performance are also carefully evaluated under conditions relevant to fuel‐cell operation, including chemical and thermal stability, proton conductivity, solubility in different solvents, water uptake, and swelling ratio. The new membranes exhibit low dimensional change at 25°C to 90°C and excellent thermal stability up to 250°C. Upon elimination of unstable end groups, the co‐polymers display enhanced chemical resistance and oxidative stability in Fenton's test. Further, the SPTESBO‐HFB‐60 (HFB‐60=hexafluorobenzene, 60 mol% sulfone) membrane displays comparable fuel‐cell performance to that of an NRE 212 membrane at 80°C under fully humidified condition, suggesting that the new membranes have the potential to be more durable but less expensive for fuel‐cell applications.     

Polymerization of Horseradish Peroxidase by a Laccase‐Catalyzed Tyrosine Coupling Reaction

The polymerization of proteins can create newly active and large bio‐macromolecular assemblies that exhibit unique functionalities depending on the properties of the building block proteins and the protein units in polymers. Herein, the first enzymatic polymerization of horseradish peroxidase (HRP) is reported. Recombinant HRPs fused with a tyrosine‐tag (Y‐tag) through a flexible linker at the N‐ and/or C‐termini are expressed in silkworm, Bombyx mori. Trametes sp. laccase (TL) is used to activate the tyrosine of Y‐tagged HRPs with molecular O₂ to form a tyrosyl‐free radical, which initiates the tyrosine coupling reaction between the HRP units. A covalent dityrosine linkage is also formed through a HRP‐catalyzed self‐crosslinking reaction in the presence of H₂O₂. The addition of H₂O₂ in the self‐polymerization of Y‐tagged HRPs results in lower activity of the HRP polymers, whereas TL provides site‐selectivity, mild reaction conditions and maintains the activity of the polymeric products. The cocrosslinking of Y‐tagged HRPs and HRP‐protein G (Y‐HRP‐pG) units catalyzed by TL shows a higher signal in enzyme‐linked immunosorbent assay (ELISA) than the genetically pG‐fused HRP, Y‐HRP‐pG, and its polymers. This new enzymatic polymerization of HRP promises to provide highly active and functionalized polymers for biomedical applications and diagnostics probes.     

Single‐Ion Conducting Electrolyte Based on Electrospun Nanofibers for High‐Performance Lithium Batteries

Herein, a novel electrospun single‐ion conducting polymer electrolyte (SIPE) composed of nanoscale mixed poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP) and lithium poly(4,4′‐diaminodiphenylsulfone, bis(4‐carbonyl benzene sulfonyl)imide) (LiPSI) is reported, which simultaneously overcomes the drawbacks of the polyolefin‐based separator (low porosity and poor electrolyte wettability and thermal dimensional stability) and the LiPF₆ salt (poor thermal stability and moisture sensitivity). The electrospun nanofiber membrane (es‐PVPSI) has high porosity and appropriate mechanical strength. The fully aromatic polyamide backbone enables high thermal dimensional stability of es‐PVPSI membrane even at 300 °C, while the high polarity and high porosity ensures fast electrolyte wetting. Impregnation of the membrane with the ethylene carbonate (EC)/dimethyl carbonate (DMC) (v:v = 1:1) solvent mixture yields a SIPE offering wide electrochemical stability, good ionic conductivity, and high lithium‐ion transference number. Based on the above‐mentioned merits, Li/LiFePO₄ cells using such a SIPE exhibit excellent rate capacity and outstanding electrochemical stability for 1000 cycles at least, indicating that such an electrolyte can replace the conventional liquid electrolyte–polyolefin combination in lithium ion batteries (LIBs). In addition, the long‐term stripping–plating cycling test coupled with scanning electron microscope (SEM) images of lithium foil clearly confirms that the es‐PVPSI membrane is capable of suppressing lithium dendrite growth, which is fundamental for its use in high‐energy Li metal batteries.     

Mathematical model of fructan biosynthesis and polymer length distribution in plants

Background and Aims

There are many unresolved issues concerning the biochemistry of fructan biosynthesis. The aim of this paper is to address some of these by means of modelling mathematically the biochemical processes.

Methods

A model has been constructed for the step-by-step synthesis of fructan polymers. This is run until a steady state is achieved for which a polymer distribution is predicted. It is shown how qualitatively different distributions can be obtained.

Key Results

It is demonstrated how a set of experimental results on polymer distribution can by simulated by a simple parameter adjustments.

Conclusions

Mathematical modelling of fructan biosynthesis can provide a useful tool for helping elucidate the details of the biosynthetic processes.