The effect of acetic acid concentration on the growth and production of gamma-linolenic acid byMucor circinelloides CBS 203.28 in fed-batch culture

The effect of different initial acetic acid concentrations on the growth of and lipid and gamma-linolenic acid (GLA) production byMucor circinelloides CBS 203.28 was determined in a 14 litre stirred tank reactor operated in a fedbatch, pH-stat mode with acetic acid as carbon source and pH titrant. Increased acetic acid concentrations in the culture resulted in a significant increase in the crude oil content of the biomass. By contrast, all the other parameters such as the biomass concentration, GLA and oil yield on acetic acid, the GLA content of the biomass and oil, the growth rate and volumetric rate of GLA production decreased with an increase in acetic acid concentration. The best results were obtained with acetic acid at 2 g/1, which gave 39.8 mg GLA/g biomass and 15.6% GLA in the neutral lipid fraction, amounting to 340 mg GLA/1 culture. A decrease in the glyco- and phospho-lipid fractions during the cultivation coincided with an increase in the neutral lipid fraction. The GLA content of the biomass remained within rather narrow limits of 3.5% to 4% of the biomass, irrespective of the oil content of the biomass. The fatty acid profile was not greatly affected by the acetic acid concentration. The hyphae of the fungus were characterized by the accumulation of large intracellular oil droplets and some septa delimited the hyphae.     

Early hominid feeding mechanisms.

Three predominant influences mark the evolution of human head form: big brain, erect bipedalism, modified oral apparatus. Confusing interplay between different adaptive requirements of each feature has made explanation of skull structure extremely difficult in the past. It now seems possible to isolate each influence in early fossil forms. A model of mammalian modes of feeding adaptation is proposed in the form of a “Natural Experiment” for tighter analysis of fossil forms. Two forms of australopithecines are recognized, “gracile” and “robust.” Both had closely similar brains, both had erect bipedalism, but each had different masticatory construction. Separation of the first two similar influences isolates the adaptive differences in oral mechanics. The gracile form had a projecting oral apparatus, distinct canine and zygomatic buttresses, moderate jaw-lever development, jaw joint not unlike most higher primates, large unusual anterior teeth, moderately sized posterior teeth. The robust form had a retruded, greatly deepened oral apparatus, “dished-in” face with fused canine and zygomatic buttresses, powerful jaw-lever development, distinctively different joint construction, remarkably small anterior teeth, enormous posterior teeth. Striking evidence for extraordinary jaw movements emerges from these features in the robust form. This is strongly supported by remarkably close parallels in Ursidae: grizzly bear and giant panda.     

Comparison of m-Endo LES, MacConkey, and Teepol media for membrane filtration counting of total coliform bacteria in water.

Total coliform counts obtained by means of standard membrane filtration techniques, using MacConkey agar, m-Endo LES agar, Teepol agar, and pads saturated with Teepol broth as growth media, were compared. Various combinations of these media were used in tests on 490 samples of river water and city wastewater after different stages of conventional purification and reclamation processes including lime treatment, and filtration, active carbon treatment, ozonation, and chlorination. Endo agar yielded the highest average counts for all these samples. Teepol agar generally had higher counts then Teepol broth, whereas MacConkey agar had the lowest average counts. Identification of 871 positive isolates showed that Aeromonas hydrophila was the species most commonly detected. Species of Escherichia, Citrobacter, Klebsiella, and Enterobacter represented 55% of isolates which conformed to the definition of total coliforms on Endo agar, 54% on Teepol agar, and 45% on MacConkey agar. Selection for species on the media differed considerably. Evaluation of these data and literature on alternative tests, including most probable number methods, indicated that the technique of choice for routine analysis of total coliform bacteria in drinking water is membrane filtration using m-Endo LES agar as growth medium without enrichment procedures or a cytochrome oxidase restriction.     

Climate change undermines the global functioning of marine food webs

Sea water temperature affects all biological and ecological processes that ultimately impact ecosystem functioning. In this study, we examine the influence of temperature on global biomass transfers from marine secondary production to fish stocks. By combining fisheries catches in all coastal ocean areas and life‐history traits of exploited marine species, we provide global estimates of two trophic transfer parameters which determine biomass flows in coastal marine food web: the trophic transfer efficiency (TTE) and the biomass residence time (BRT) in the food web. We find that biomass transfers in tropical ecosystems are less efficient and faster than in areas with cooler waters. In contrast, biomass transfers through the food web became faster and more efficient between 1950 and 2010. Using simulated changes in sea water temperature from three Earth system models, we project that the mean TTE in coastal waters would decrease from 7.7% to 7.2% between 2010 and 2100 under the ‘no effective mitigation’ representative concentration pathway (RCP8.5), while BRT between trophic levels 2 and 4 is projected to decrease from 2.7 to 2.3 years on average. Beyond the global trends, we show that the TTEs and BRTs may vary substantially among ecosystem types and that the polar ecosystems may be the most impacted ecosystems. The detected and projected changes in mean TTE and BRT will undermine food web functioning. Our study provides quantitative understanding of temperature effects on trophodynamic of marine ecosystems under climate change.     

Population and genetic structure of a male-dispersing strepsirrhine,Galago moholi (Primates,Galagidae), from northern South Africa,inferred from mitochondrial DNA

Primates - The habitats of Galago moholi are suspected to be largely fragmented, while the species is thought to be expanding further into the southernmost fringe of its range, as well as into...     

Physicomechanical Characterization and Optimization of EDTA–mPEG and Avicel®–EDTA–mPEG In Situ Melt Dispersion Mini-Pellets

The purpose of this study was to develop a physicomechanically customizable oral metal chelatory in situ hot melt dispersion mini-pellet entity which could be utilized within a binary drug delivery system. Avicel^® RC/CL type R-591 was included within the in situ hot melt dispersion mini-pellet formulations to determine the physicomechanical effect this compound would have on the mini-pellet formulations. The physicomechanical properties of the hot melt in situ mini-pellet formulations were mathematically fitting to regression curves. Physicomechanical adjustment of the in situ hot melt dispersion mini-pellet formulations could be mathematically predicted with the derived regression curve equations. The addition of Avicel^® RC/CL type R-591 increased the physicomechanical properties such as matrix hardness and increased total disintegration of the in situ hot melt dispersion mini-pellet formulations. The utilization of a physicomechanically customizable oral metal chelatory in situ hot melt dispersion mini-pellet entity within a binary drug delivery system would to achieve a synergistically enhance the activity of a drug-carrying entity or a permeation enhancing entity within a single drug delivery unit. The experimental results indicated that weights of the pellets that achieved optimal hardness ranged between 35 and 45 mg. The melt–dispersion formulations disintegrated within shorter time periods and maintained higher ethylenediaminetetraacetic acid (EDTA) concentrations whereas melt–dispersion formulations which included Avicel^® had superior physicomechanical properties. Disintegration times ranged between 1,000 s for melt–dispersions containing EDTA and methyloxy polyethylene glycol 2000 (mPEG) only, to >6,000 s for melt–dispersions comprising EDTA, mPEG, and Avicel^®.