Removal of persistent organic pollutants from micro-polluted drinking water by triolein embedded absorbent

A new biomimetic absorbent, cellulose acetate (CA) embedded with triolein (CA-triolein), was prepared and applied for the removal of persistent organic pollutants (POPs) from micro-polluted aqueous solution. The comparison of CA-triolein, CA and granular activated carbon (GAC) for dieldrin removal was investigated. Results showed that CA-triolein absorbent gave a lowest residual concentration after 24 h although GAC had high removal rate in the first 4 h adsorption. Then the removal efficiency of mixed POPs (e.g. aldrin, dieldrin, endrin and heptachlor epoxide), absorption isotherm, absorbent regeneration and initial column experiments of CA-triolein were studied in detail. The linear absorption isotherm and the independent absorption in binary isotherm indicated that the selected POPs are mainly absorbed onto CA-triolein absorbent by a partition mechanism. The absorption constant, K, was closely related to the hydrophobic property of the compound. Thermodynamic calculations showed that the absorption was spontaneous, with a high affinity and the absorption was an endothermic reaction. Rinsing with hexane the CA-triolein absorbent can be regenerated after absorption of POPs. No significant decrease in the dieldrin removal efficiency was observed even when the absorption–regeneration process was repeated for five times. The results of initial column experiments showed that the CA-triolein absorbent did not reach the breakthrough point at a breakthrough empty-bed volume (BV) of 3200 when the influent concentration was 1–1.5 μg/L and the empty-bed contact time (EBCT) was 20 min.     

Effects of gestational exposure to 1.95‐GHz W‐CDMA signals for IMT‐2000 cellular phones: Lack of embryotoxicity and teratogenicity in rats

The present study was designed to evaluate whether gestational exposure to an EMF targeting the head region, similar to that from cellular phones, might affect embryogenesis in rats. A 1.95‐GHz wide‐band code division multiple access (W‐CDMA) signal, which is one applied for the International Mobile Telecommunication 2000 (IMT‐2000) system and used for the freedom of mobile multimedia access (FOMA), was employed for exposure to the heads of four groups of pregnant CD(SD) IGS rats (20 per group) for gestational days 7–17. The exposure was performed for 90 min/day in the morning. The spatial average specific absorption rate (SAR) for individual brains was designed to be 0.67 and 2.0 W/kg with peak brain SARs of 3.1 and 7.0 W/kg for low (group 3) and high (group 4) exposures, respectively, and a whole‐body average SAR less than 0.4 W/kg so as not to cause thermal effects due to temperature elevation. Control and sham exposure groups were also included. At gestational day 20, all dams were killed and fetuses were taken out by cesarean section. There were no differences in maternal body weight gain. No adverse effects of EMF exposure were observed on any reproductive and embryotoxic parameters such as number of live (243–271 fetuses), dead or resorbed embryos, placental weights, sex ratios, weights or external, visceral or skeletal abnormalities of live fetuses. Bioelectromagnetics 30:205–212, 2009. © 2008 Wiley‐Liss, Inc.     

Mud-puddling in the yellow-spined bamboo locust, Ceracris kiangsu (Oedipodidae: Orthoptera): Does it detect and prefer salts or nitrogenous compounds from human urine?

C. kiangsu adults were observed visiting human urine, especially on hot summer days. The main chemicals in fresh human urine include inorganic salts and CO(NH₂)_2. When human urine was incubated, NH₄HCO₃ became the richest nitrogenous compound. The phagostimulants, repellents and attractants in urine were identified here. On the filter papers treated with fresh or incubated urine samples, the 5th instar nymphs and the adults started and continued gnawing around the edges, in contrast to the 3rd and the 4th instar nymphs. The consumed areas were dramatically greater on the filters treated with the urine samples incubated for 3-6 days. The feedings of both male and female adults were also stimulated by several urine-borne components such as NaCl, NaH₂PO₄, Na₂SO₄, KCl, NH₄Cl and NH₄HCO₃ but not by CO(NH₂)₂. Among them NaCl was the most powerful phagostimulant. The repelling, or attractive/arresting effects of CO(NH₂)₂ and NH₄HCO₃ were also evaluated by a two-choice test. When exposed to water- and CO(NH₂)₂ solution-immersed filters simultaneously, the adults prefer to stay on water-immersed filter. In contrast, when provided water- and NH₄HCO₃ solution-treated filters, the adults prefer to stay on NH₄HCO₃ solution-treated filter. This demonstrated that CO(NH₂)₂ acted as a repellent and NH₄HCO₃ as an attractant/arrestant. In the bamboo forest, similar feeding behavior was also elicited by NaCl, NH₄HCO₃ but not by CO(NH₂)₂. Comparing to NaCl solution, a mixed solution of NaCl and CO(NH₂)₂ (1:1) significantly decreased the consumed area of the treated filters whereas a mixed solution of NaCl and NH₄HCO₃ (1:1) dramatically increased the consumed area. These results demonstrated that the phagostimulatory effect by NaCl was reduced by CO(NH₂)₂ in fresh urine and was enhanced by NH₄HCO₃ in incubated urine.     

Helix Straightening as an Activation Mechanism in the Gelsolin Superfamily of Actin Regulatory Proteins

Villin and gelsolin consist of six homologous domains of the gelsolin/cofilin fold (V1–V6 and G1–G6, respectively). Villin differs from gelsolin in possessing at its C terminus an unrelated seventh domain, the villin headpiece. Here, we present the crystal structure of villin domain V6 in an environment in which intact villin would be inactive, in the absence of bound Ca²⁺ or phosphorylation. The structure of V6 more closely resembles that of the activated form of G6, which contains one bound Ca²⁺, rather than that of the calcium ion-free form of G6 within intact inactive gelsolin. Strikingly apparent is that the long helix in V6 is straight, as found in the activated form of G6, as opposed to the kinked version in inactive gelsolin. Molecular dynamics calculations suggest that the preferable conformation for this helix in the isolated G6 domain is also straight in the absence of Ca²⁺ and other gelsolin domains. However, the G6 helix bends in intact calcium ion-free gelsolin to allow interaction with G2 and G4. We suggest that a similar situation exists in villin. Within the intact protein, a bent V6 helix, when triggered by Ca²⁺, straightens and helps push apart adjacent domains to expose actin-binding sites within the protein. The sixth domain in this superfamily of proteins serves as a keystone that locks together a compact ensemble of domains in an inactive state. Perturbing the keystone initiates reorganization of the structure to reveal previously buried actin-binding sites.Actin is crucial to such processes as cell movement, cell division, and apoptosis, which are regulated by numerous actin-binding proteins, including gelsolin, Arp2/3, and profilin (for review, see Ref. 1). Gelsolin, the most potent actin filament-severing protein known, can bind to, sever, cap, and nucleate actin filaments in a calcium-, pH-, ATP-, and phospholipid-dependent manner (for review, see Ref. 2). Villin, found in microvilli of absorptive epithelium, is a second member of the gelsolin family of actin-binding proteins. In addition to standard gelsolin-type activities, villin is able to bundle actin filaments and is subject to regulation by tyrosine phosphorylation as well as by Ca²⁺ and phosphatidylinositol 4,5-bisphosphate (for review, see Ref. 3). Many comparisons have been made between gelsolin and villin. The two share 50% amino acid sequence identity and show similar proteolytic cleavage patterns (4). Both contain six similarly folded domains, but villin possesses a seventh domain at its C terminus, the headpiece (HP)² domain, which folds into a compact structure that introduces a second F-actin-binding site into the protein. Recent studies indicate that villin uses the HP F-actin-binding sites to achieve bundling (5). In an environment devoid of free Ca²⁺, gelsolin and villin assume inactive conformations. After binding Ca²⁺, both undergo conformational rearrangements that expose their binding sites for F-actin. In villin, this includes revealing the HP actin-binding site through a “hinge mechanism” (6).Biochemical and structural studies have revealed eight Ca²⁺-binding sites of two types in gelsolin (for review, see Ref. 7). Each of the six domains contains a complete and evolutionarily conserved site, termed type 2, whereas G1 and G4 provide partial Ca²⁺ coordination at interfaces with actin through sites termed type 1. Sequential mutagenesis of these sites in villin has identified six functional Ca²⁺-binding sites (8): two major sites, one each of type 1 and type 2, in V1, plus four type 2 sites in V2–V6. The type 1 site in V1 regulates F-actin-capping and F-actin-severing activities, whereas the lower affinity type 2 site in V1 only affects severing (9). The other four sites are involved in stabilizing villin conformation, but they do not directly influence actin-severing activity. NMR studies of a fragment of villin that consists of V6 and the HP domain have implicated V6 residues Asn⁶⁴⁷, Asp⁶⁴⁸, and Glu⁶⁷⁰ in binding Ca²⁺ (10). These experiments also revealed the first 80 residues of V6 to undergo significant conformational change as a result of Ca²⁺ binding.Nanomolar to micromolar concentrations of free Ca²⁺ govern the actin-binding activities of gelsolin. In contrast, micromolar and millimolar concentrations of calcium ions are required for villin to exhibit capping and severing, respectively. However, after tyrosine phosphorylation, villin can sever actin filaments even at nanomolar Ca²⁺ concentrations (11). Furthermore, although the actin-severing ability of the N-terminal half of villin is calcium-dependent, that by the N-terminal half of gelsolin is not. In contrast, the binding of G-actin of the C-terminal half of both villin and gelsolin requires Ca²⁺. Creation of hybrid proteins demonstrated that the domains of villin and gelsolin are not interchangeable (12).Abundant x-ray crystallographic structural information exists for gelsolin, including the calcium ion-free (Ca²⁺-free), inactive structure of the intact protein (13), the activated N- and C-terminal halves, each in a bimolecular complex with actin (7, 14), and the activated C-terminal half on its own (15, 16). Structural data for intact villin are unavailable and are limited to fragment V1 (17), solved using NMR methods, and the HP domain, solved by NMR and x-ray crystallography (18, 19). NMR experiments also indicate that HP is connected to V6 by a 40-residue disordered linker. As a result, HP has been proposed to bind actin independently of the remainder of the protein (10).In this report, we present the structure of Ca²⁺-free, isolated villin V6, which exhibits a typical gelsolin domain fold. The long helix in V6 in this structure is straight, unlike the corresponding helix in G6 of intact Ca²⁺-free gelsolin, which is bent, and only straightens on calcium activation of the intact protein. Hence, V6 appears to be in an active conformation in the absence of Ca²⁺. Molecular dynamics simulations indicate that the preferred state of the long helix is also straight for isolated G6 in the absence of Ca²⁺. Furthermore, they suggest a bistable mechanism of helix conformational change regulated by the presence of the remaining domains, by calcium ions, and by other interactants. We therefore propose a mechanism for the gelsolin family proteins whereby Ca²⁺ triggers the straightening of the domain 6 helix in the native conformation of the inactive proteins to propagate more widespread conformational changes.     

Mapping QTLs for seed yield and drought susceptibility index in soy-bean（Glycine max L.） across different environments

Drought stress has long been a major constraint in maintaining yield stability of soybean （Glycine max （L.） Merr.） in rainfed ecosystems. The identification of consistent quantitative trait loci （QTL） involving seed yield per plant （YP） and drought susceptibility index （DSI） in a population across different environments would therefore be important in molecular marker-assisted breeding of soybean cultivars suitable for rainfed regions. The YP of a recombinant line population of 184 F2：7：11 lines from a cross of Kefengl and Nannong1138-2 was studied under water-stressed （WS） and well-watered （WW） conditions in field （F） and greenhouse （G） trials, and DSI for yield was calculated in two trials. Nineteen QTLs associated with YP-WS and YP-WW, and 10 QTLs associated with DSI, were identi- fied. Comparison of these QTL locations with previous findings showed that the majority of these regions control one or more traits re- lated to yield and other agronomic traits. One QTL on molecular linkage group （MLG） K for YP-F, and two QTLs on MLG C2 for YP-G, remained constant across different water regimes. The regions on MLG C2 for YP-WW-F and MLG H for YP-WS-F had a pleiotropic effect on DSI-F, and MLG A1 for YP-WS-G had a pleiotropic effect on DSI-G. The identification of consistent QTLs for YP and DSI across different environments will significantly improve the efficiency of selecting for drought tolerance in soybean.     

Glucose biosensor based on electrodeposited platinum nanoparticles and three-dimensional porous chitosan membranes

The chitosan with three-dimensional porous structure greatly increased the effective electrode surface for loading of platinum nanoparticles and promoted efficient electron transfer. The resulting biosensor had a response time (within 5 s) and a linear response from 6 μM to 4.2 mM glucose with a detection limit of 2 μM (S/N = 3). Moreover, the methodology can be applied for the immobilization of other enzymes.     

Optimization of covalent immobilization of pectinase on sodium alginate support

Pectinase was immobilized on a sodium alginate support using glutaraldehyde and retained 66% activity. The optimal pH for activity shifted from 3.0 to 3.5 after immobilization; however, the optimum temperature remained unchanged at 40°C. The immobilized enzyme also had a higher thermal stability and reusability than the free enzyme, and retained 80% of initial activity after 11 batch reactions.     

Improving heterologous polyketide production in <Emphasis Type="Italic">Escherichia coli</Emphasis> by overexpression of an <Emphasis Type="Italic">S</Emphasis>-adenosylmethionine synthetase gene

An S-adenosylmethionine synthetase gene (metK) from Streptomyces spectabilis was cloned into an expression plasmid under the control of an inducible T7 promoter and introduced into a strain of Escherichia coli (BAP1(pBP130/pBP144)) capable of producing the polyketide product 6-deoxyerythronolide B (6-dEB). The metK coexpression in BAP1(pBP130/pBP144) improved the specific production of 6-dEB from 10.86 to 20.08 mg l⁻¹ . In an effort to probe the reason for this improvement, a series of gene deletion and expression experiments were conducted based on a metK metabolic pathway that branches between propionyl-CoA (a 6-dEB precursor) and autoinducer compounds. The deletion and expression studies suggested that the autoinducer pathway had a larger impact on improved 6-dEB biosynthesis. Supporting these results were experiments demonstrating the positive effect conditioned media (the suspected location of the autoinducer compounds) had on 6-dEB production. Taken together, the results of this study show an increase in heterologous 6-dEB production concomitant with heterologous metK gene expression and suggest that the mechanism for this improvement is linked to native autoinducer compounds.