腺病毒介导的人巨细胞病毒UL49基因小鼠模型的建立

建立表达HCMV UL49 基因的转基因小鼠,为抗病毒药物研究提供有效的实验动物模型。本实验将UL49-GFP基因插入腺病毒穿梭质粒pDC316中,构建重组质粒pDC316-UL49-GFP,与腺病毒骨架质粒pBHGloxΔE1,3Cre 通过脂质体介导共转染293 细胞,重组产生腺病毒Ad-UL49-GFP, 经PCR和Western Blot鉴定正确后,大量扩增、纯化,制备高滴度重组腺病毒。纯化腺病毒经尾静脉注射感染小鼠,通过荧光定量PCR 和Western blot 方法,检测UL49 基因在小鼠体内组织分布和表达时相。结果显示UL49基因在小鼠的心、肝、脾、肺、肾组织均有表达,并且表达量由高到低顺序依次是：肝、脾、肾、心、肺,在腺病毒感染第3天在各靶器官表达水平较高,此后逐渐下降,第14天时仅存在肝和脾中。表明表达UL49基因的小鼠模型构建成功。小鼠模型的成功建立为下一步筛选以UL49基因为靶的抗病毒药物奠定了基础。     

西双版纳少数民族地区主要作物地方品种调查与分析

对云南省西双版纳傣族自治州勐海县和勐腊县的傣族、哈尼族、拉祜族、彝族地区的作物地方品种进行了调查,收集了粮食作物、蔬菜、果树、经济作物的地方品种和野生资源样本共353份,分属40科71属87种。通过分析上述调查资源的特性及分布特点,基本明确了西双版纳傣族自治州主要作物资源的保存现状,揭示了不同少数民族的传统喜好、宗教祭祀以及不同生态环境对作物种质资源多样性保存的作用。针对该地区作物种质资源的特性,提出了西双版纳少数民族地区主要作物地方品种的保护策略。     

Influence of Plasmid pO157 on Escherichia coli O157:H7 Sakai Biofilm Formation

The role of plasmid pO157 in biofilm formation was investigated using wild-type and pO157-cured Escherichia coli O157:H7 Sakai. Compared to the wild type, the biofilm formed by the pO157-cured mutant produced fewer extracellular carbohydrates, had lower viscosity, and did not give rise to colony morphology variants that hyperadhered to solid surfaces.Enterohemorrhagic Escherichia coli serotype O157:H7 is a major food-borne pathogen causing hemorrhagic colitis and the hemolytic-uremic syndrome (17). Many E. coli O157:H7 outbreaks have been associated with contaminated undercooked ground beef, vegetables, fruits, and sprouts (20, 31). One of the largest disease outbreaks occurred in Sakai City, Japan, in 1996 with nearly 8,000 confirmed cases. The E. coli isolate responsible for this outbreak, referred to as “Sakai,” is one of the best-characterized isolates and one of only three O157 strains for which the genome has been fully sequenced (8, 16). Because of its importance as a human pathogen and its characterization, Sakai was the focus of this investigation.There is significant phenotypic diversity among E. coli O157:H7 strains, including the ability to form biofilm. Previous studies show that certain E. coli O157:H7 strains form biofilm on various surfaces, and biofilm on food or food-processing surfaces can serve as a source or vehicle of contamination that may result in human infection (6, 18, 25). Biofilm is an organized and structured community of microorganisms that attaches to solid surfaces and contains cells embedded in an extracellular polymer matrix (4, 26). Exopolysaccharide (EPS) is a major component of the biofilm matrix and is required for the development of characteristic biofilm architecture (5, 29). Bacteria gain a variety of advantages from biofilm formation that include attachment, colonization, and protection from adverse environments (4, 11).E. coli O157:H7 carries a 92-kb virulence plasmid (pO157) encoding a number of putative virulence determinants, including ehxA, etpC to etpO, espP, katP, toxB, ecf, and stcE (31). However, the biological role of pO157 is not fully understood, and only 19 genes among the 100 open reading frames (ORFs) in pO157 have been characterized (2, 15). Our previous work indicates that pO157 is a colonization factor in cattle and may regulate several chromosomal genes (14, 24, 31).To investigate the role of pO157 in biofilm formation, we characterized the biofilm of wild-type E. coli O157:H7 strain Sakai and an isogenic pO157-cured Sakai (Sakai-Cu). Both strains were kindly provided by C. Sasakawa (University of Tokyo). Sakai-Cu was generated using a plasmid incompatibility method (27). This method is not prone to secondary mutations and requires minimal passage in laboratory medium. The mini-R plasmid pK2368, harboring a chloramphenicol (CM) resistance gene and being in the same plasmid incompatibility group as pO157, was introduced into wild-type Sakai by transformation. Transformants were isolated on LB agar containing CM and selected for loss of pO157 by agarose gel electrophoresis analysis. CM-resistant transformants were cured of pKP2368 by subculturing in LB broth without CM. The absence of pO157 was confirmed by Southern blot hybridization with a pO157-specific gene probe (derived from ecf1), and chromosomal DNA integrity was confirmed by pulsed-field gel electrophoresis (data not shown).Because E. coli O157:H7 strains are generally not strong biofilm producers, the condition most conducive to biofilm production, a fluorometric flow cell method, was used to compare separately grown Sakai and Sakai-CU (3). The biofilm cultivation systems consisted of seven parts: (i) medium reservoir, (ii) multichannel pump (205S; Watson Marlow, United Kingdom), (iii) bubble trap (BioSurface Technologies Co., Bozeman, MT), (iv) flow cell, (v) outflow reservoir, (vi) air pump (DrsFosterSmith, Rhinelander, WI), and (vii) flow meter (Gilmont, BC Group, St. Louis, MO). The flow cell was constructed from two rectangular acrylic plates that were 104 by 48 mm. Sidewalls (62 by 26 by 5 mm) were glued to the top plate to form an elongated hexagonal growth chamber. There were 56- by 20-mm square openings in the top and bottom rectangular plates that were sealed with 60- by 24-mm glass slides (Fisher, Pittsburgh, PA). The upper and lower plates were assembled with screws and sealed using a microseal B film (MJ Research, Waltham, MA). The flow cell volume was about 10.4 ml, the medium flow rate was 10.5 ml/h, and the hydraulic retention time was 1 h. Under these conditions, the linear surface velocity was about 80 mm/h at the center of the flow cell. The biofilm was grown with BGM2 medium (21). To prepare the inoculums, Sakai and Sakai-Cu were grown at 37°C in BGM2 medium to mid-exponential phase, and cells were harvested by centrifugation and resuspended in 0.85% NaCl. One hundred μl of the resuspended cell solution was inoculated from the effluent side of flow cells through a long stainless steel needle (Fisher, Pittsburgh, PA). The cells were incubated for at least 3 h without supplying fresh medium, and then fresh medium was supplied to the biofilm cultivation system at 30°C.At various times, the resulting biofilms were stained with a green fluorescent dye, wheat germ agglutinin (WGA)- Alexa Fluor 488 (Invitrogen, Carlsbad, CA), and analyzed using the Olympus FluoView confocal laser scanning microscopy system (Olympus, Tokyo, Japan). Using the Olympus FluoView software program, version 1.7b, for analysis, the fluorescence intensities of Sakai and Sakai-Cu biofilm matrices were each analyzed from >20 three-dimensional-complexity images. Fluorescence was greater for Sakai than for Sakai-Cu, with average values of 2,448 ± 668 and 2,022 ± 619, respectively (Student''s t test; P < 0.05). Overhead images from the Sakai-Cu strain biofilm revealed more-compact cell clusters than images from wild-type Sakai (Fig. 1A and B). Comparisons of images taken sideways indicated that the Sakai-Cu biofilms were not as thick as those of wild-type Sakai (Fig. 1C and D), and typical ratios were consistently 9:11, respectively (P < 0.05). A previous study demonstrated that the biofilm of a wcaF::can mutant of E. coli K-12, which is deficient in EPS production, lacked depth and complex architecture (5). Sakai-Cu showed a similar but less dramatic phenomenon. These observations indicated that pO157 influenced biofilm formation and architecture.Open in a separate windowFIG. 1.Wild-type Sakai (A and C) or Sakai-Cu (B and D) biofilms after 3 days of incubation. Both strains were grown at 30°C in an individual flow cell apparatus. The biofilm was stained with WGA-Alexa Fluor 488 and examined by confocal microscopy. Representative overhead (A and B) or sagittal (C and D) images are shown and were generated using the deconvolution software. Bar, 50 μm.To quantitatively compare Sakai and Sakai-Cu biofilms, the contents of each flow cell apparatus were collected at various times and analyzed for bacterial cell number, viscosity, and EPS production. Biofilms were harvested by a standard technique that preserves cell numbers and minimizes viscosity changes (9). Briefly, floating cells in the biofilm were carefully collected with a pipet, and the remaining cells were scraped from the flow cell apparatus with sterilized applicator sticks. Biofilm samples were collected on days 1, 3, 5, 8, and 12, and measurements were means ± standard deviations (SD) of at least triplicate measurements from separately grown biofilms. There was no significant difference in bacterial number (CFU/ml) from Sakai and Sakai-Cu biofilms at any of the times measured (data not shown). A Cannon-Fenske routine viscometer (Size 100; Cannon Instrument Co., Pennsylvania) was used to determine biofilm viscosity. The conversion constant was 0.015 cSt/s (mm²/s²), and viscosities were measured according to the manufacturer''s instructions. Briefly, the viscometer was aligned vertically in the holder, and the sample was charged into the viscometer tube until the sample reached the “F” mark in the tube. A suction bulb was used to draw the sample slightly above mark “E.” The sample was allowed to flow freely, and the efflux time was measured as the time for the meniscus to pass from mark “E” to mark “F.” Measurements were repeated at least six times, and the kinematic viscosity in mm²/s (cSt) of the samples was calculated by multiplying the efflux time in seconds by the viscometer constant. The viscosity of Sakai biofilm was dramatically increased after 8 days (P < 0.001), while there was no significant change in the viscosities of Sakai-Cu biofilms through day 12 (Fig. ​(Fig.22).Open in a separate windowFIG. 2.Comparison of Sakai and Sakai-Cu biofilm viscosity. Three or four separately grown biofilms were each harvested on the days indicated, and viscosity was measured using a Cannon-Fenske Routine viscometer.Bacterial EPS are associated with attachment to both inanimate surfaces and host cells (29). EPS can be categorized as extracellular carbohydrate complexes (ECC) that are loosely associated with cells and easily removed, referred to as slime (fraction I), or ECC that are closely associated with cells and removed only after heat treatment, referred to as capsule (fraction II) (22). No significant difference in ECC was observed until days eight and 12, when the level of total ECC produced from Sakai biofilms was significantly higher than that from the Sakai-Cu biofilms (P < 0.05) (Fig. ​(Fig.3).3). Also, by days eight and 12, levels of Sakai ECC fraction I, representing primarily secreted slime carbohydrates, were 5 and 10 times higher than Sakai-Cu ECC fraction I, respectively. These results correlated with the results of increased viscosity in Sakai biofilm samples that had aged for 8 or 12 days.Open in a separate windowFIG. 3.Comparison of Sakai and Sakai-Cu biofilm extracellular carbohydrate (ECC) production. ECC I was collected from cells by centrifugation, and ECC II was collected by centrifugation after heat treatment on each indicated day. Bar height represents total ECC production from each biofilm sample. The proportion of total ECC that was either ECC I (dark gray) or ECC II (light gray) is shown. Asterisks indicate significant differences between wild-type Sakai (Wt) and Sakai-Cu (Cu); day 8, P < 0.05; day 12, P < 0.001.Interestingly, during biofilm sampling, two colony morphology variants were isolated that are referred to here as sticky and mucoid. These variants were found only in wild-type Sakai biofilms that had aged for ≥8 days and were not found in Sakai-Cu biofilms even after screening of 10⁴ colonies and even among biofilms aged for 18 days. The percentages of sticky and mucoid variants in Sakai biofilms ranged from 5 to 30% and 0 to 5%, respectively. The differences in colony morphology were readily distinguished, as shown in Fig. ​Fig.4.4. The sticky variant was raised in elevation and shinier than the Sakai parent strain but was not difference in size. When single bacterial colonies grown on agar plates were touched with a sterilized toothpick and that toothpick was gently lifted up, the colonies had a hyperadherence phenotype and elongated to approximately 1 cm between the plate and the toothpick. This phenomenon was unique to the sticky colony variants and was not observed among colonies of the parent Sakai strain (Fig. ​(Fig.4D).4D). The mucoid colony variants were convex in elevation and shiny in texture, had irregular colony shapes, and were larger than the Sakai parent strain but were not hyperadherent. The motility of variants was determined using 0.3% soft agar, and both sticky and mucoid variants exhibited 30- to 90%-reduced motility compared to the parent Sakai strain (data not shown). The characteristics of both sticky and mucoid variants were inherited, and the variant characteristics were maintained in laboratory subculture through 15 generations.Open in a separate windowFIG. 4.Colony morphologies of wild-type, mucoid, and sticky variants. The wild-type E. coli O157:H7 Sakai strain formed small, flat, and nonsticky colonies on LB agar (A). The mucoid variant formed irregular, large, shiny, mucoid, convex, and nonsticky colonies (B). The sticky variant formed small, slightly raised, and sticky colonies (C). The sticky variant adheres to a toothpick touched to the colony surface (D). Bar, 1 cm.It is known that mutation is a powerful mechanism of adaptation when bacteria are faced with environmental change (1). Like other bacterial variants, the sticky and mucoid phenotypic biofilm variants may provide a survival advantage in specific niches (10, 19). Pseudomonas aeruginosa is a well-known biofilm model, and colony morphology variants are a common biofilm-related phenomenon. Both reduced-motility and hyperadherence variants have been described (10) and have characteristics similar to those of the E. coli O157:H7 biofilm variants described here. However, unlike the P. aeruginosa biofilm variants, the sticky and mucoid Sakai variants were not smaller, rougher, or more wrinkled than the parent colony.Although it is possible that the changes measured in biofilm formation and the generation of hyperadherent variants were not due to the plasmid, it is highly unlikely. The method of plasmid curing by incompatibility is gentle and is not prone to secondary mutation. A powerful and common approach to address possible secondary mutations is complementation; however, it was not used here because reintroduction of the plasmid requires the manipulation of a very large piece of DNA (92 kb) and the procedure itself is likely to introduce mutation. Also, reintroduction of the large 92-kb pO157 plasmid would require antibiotic resistance for efficient selection, and this may influence biofilm formation.Many regulatory mechanisms are involved in biofilm formation (7, 12, 13, 28, 30, 32). Among those mechanisms, the relationship between biofilm formation and acid resistance is well known. Biofilm formation is upregulated after the deletion of the gad or hde gene, which allows bacteria to survive under acidic conditions (12). Previously we showed that an isogenic pO157-cured strain of E. coli O157:H7, ATCC 43894, enhanced acid resistance through increased expression of Gad (14). Similarly, Sakai-Cu has enhanced acid resistance compared to wild-type Sakai (data not shown and J. Y. Lim, B. Hong, H. Sheng, S. Shringi, R. Kaul, and C. J. Hovde, submitted for publication). The link between increased acid resistance and reduced biofilm formation, reduced ESP production, reduced viscosity, and lack of colony morphology variants was not explored here. Comparisons of biofilm formation were not made between these two strains because neither wild-type E. coli O157:H7 ATCC 43894 nor its plasmid-cured strain form significant biofilm under the laboratory conditions tested (data not shown).Two pO157-cured E. coli O157 strains (ATCC 43894 and Sakai) do not colonize cattle as well as their wild-type counterpart (14, 24). The mechanism for this difference may be related to pO157 encoding a set of putative type II secretion genes, etpC to etpM, etpO, and etpS, and these etp genes may be associated with protein secretion required for efficient adherence (23). Tatsuno et al. reported that the toxB gene encoded on pO157 is required for the full epithelial cell adherence phenotype (27). These results may relate to the defect of Sakai-Cu in biofilm formation.In conclusion, this is the first report that pO157 affects biofilm formation of E. coli O157:H7 Sakai through increased EPS production and generation of hyperadherent variants. Further study of biofilm formation under a variety of conditions and comparisons of Sakai with other E. coli O157:H7 strains will be important for understanding the relationship between biofilm formation and E. coli O157:H7 virulence and survival on foods and in the farm environment.     

Identification of a Novel Class of Membrane-Bound [NiFe]-Hydrogenases in Thermococcus onnurineus NA1 by In Silico Analysis

In silico analysis of group 4 [NiFe]-hydrogenases from a hyperthermophilic archaeon, Thermococcus onnurineus NA1, revealed a novel tripartite gene cluster consisting of dehydrogenase-hydrogenase-cation/proton antiporter subunits, which may be classified as the new subgroup 4b of [NiFe]-hydrogenases-based on sequence motifs.Hydrogenases are the key enzymes involved in the metabolism of H₂, catalyzing the following chemical reaction: 2H⁺ + 2e⁻ ↔ H₂. Hydrogenases can be classified into [NiFe]-hydrogenases, [FeFe]-hydrogenases, and [Fe]-hydrogenases, based on their distinctive functional core containing the catalytic metal center (11, 17).The genomic analysis of Thermococcus onnurineus NA1, a hyperthermophilic archaeon isolated from a deep-sea hydrothermal vent area, revealed the presence of several distinct gene clusters encoding seven [NiFe]-hydrogenases and one homolog similar to Mbx (membrane-bound oxidoreductase) from Pyrococcus furiosus (1, 6, 8, 12). According to the classification system of hydrogenases by Vignais et al. (17), three hydrogenases (one F₄₂₀-reducing and two NADP-reducing hydrogenases) belong to group 3 [NiFe]-hydrogenases, and four hydrogenases belong to group 4 [NiFe]-hydrogenases. The group 4 hydrogenases are widely distributed among bacteria and archaea (17), with Hyc and Hyf (hydrogenase 3 and 4, respectively) from Escherichia coli (19), Coo (CO-induced hydrogenase) from Rhodospirillum rubrum (4), Ech (energy-converting hydrogenase) from Methanosarcina barkeri (7), and Mbh (membrane-bound hydrogenase) from P. furiosus (6, 10, 12) being relatively well-characterized hydrogenases in this group. One of the four group 4 hydrogenases from T. onnurineus NA1 was found to be similar in sequence to that of P. furiosus Mbh (10).     

Fuzzy regression modeling for tool performance prediction and degradation detection

In this paper, the viability of using Fuzzy-Rule-Based Regression Modeling (FRM) algorithm for tool performance and degradation detection is investigated. The FRM is developed based on a multi-layered fuzzy-rule-based hybrid system with Multiple Regression Models (MRM) embedded into a fuzzy logic inference engine that employs Self Organizing Maps (SOM) for clustering. The FRM converts a complex nonlinear problem to a simplified linear format in order to further increase the accuracy in prediction and rate of convergence. The efficacy of the proposed FRM is tested through a case study - namely to predict the remaining useful life of a ball nose milling cutter during a dry machining process of hardened tool steel with a hardness of 52-54 HRc. A comparative study is further made between four predictive models using the same set of experimental data. It is shown that the FRM is superior as compared with conventional MRM, Back Propagation Neural Networks (BPNN) and Radial Basis Function Networks (RBFN) in terms of prediction accuracy and learning speed.     

Serum miR-146a and miR-223 as potential new biomarkers for sepsis

Objective

Current biomarkers cannot completely distinguish sepsis from systemic inflammatory response syndrome (SIRS) caused by other non-infectious diseases. Circulating microRNAs (miRNAs) are promising biomarkers for several diseases, but their correlation with sepsis is not totally clarified.

Methods

Seven miRNAs related to inflammation or infection were included in the present study. Serum miRNA expression was investigated in 50 patients diagnosed with sepsis, 30 patients with SIRS and 20 healthy controls to evaluate the diagnostic and prognostic value. Expression levels of serum miRNAs were determined by quantitative PCR using the Qiagen miScript system. Serum CRP and IL-6 levels were determined by enzyme linked immunosorbent assay.

Results

Serum miR-146a and miR-223 were significantly reduced in septic patients compared with SIRS patients and healthy controls. The areas under the receiver operating characteristic curve of miR-146a, miR-223 and IL-6 were 0.858, 0.804 and 0.785, respectively.

Conclusion

Serum miR-146a and miR-223 might serve as new biomarkers for sepsis with high specificity and sensitivity. (ClinicalTrials.gov number, NCT00862290.)     

A recombinant mimetics of the HIV-1 gp41 prehairpin fusion intermediate fused with human IgG Fc fragment elicits neutralizing antibody response in the vaccinated mice

HIV-1 gp41 prehairpin fusion intermediate (PFI) composed of three N-terminal heptad repeats (NHR) plays a crucial role in viral fusion and entry and represents an attractive target for anti-HIV therapeutics (e.g., enfuvirtide) and vaccines. In present study, we constructed and expressed two recombinant gp41 PFI mimetics, designated N46Fd and N46FdFc. N46Fd consists of N46 (residues 536-581) in gp41 NHR and foldon (Fd), a trimerization motif. N46FdFc is composed of N46Fd fused with human IgG Fc fragment as an immunoenhancer. We immunized mice with N46 peptide, N46Fd and N46FdFc, respectively, and found that only N46FdFc elicited neutralizing antibody response in mice against infection by HIV-1 strains IIIB (clade B, X4), 92US657 (clade B, R5), and 94UG103 (clade A, X4R5). Anti-N46FdFc antibodies inhibited PIE7 binding to PFI, blocked gp41 six-helix bundle formation, and suppressed HIV-1 mediated cell-cell fusion. These findings provide an important clue for developing recombinant gp41 PFI mimetics-based HIV vaccines.     

DNA-PK/Ku complex binds to latency-associated nuclear antigen and negatively regulates Kaposi’s sarcoma-associated herpesvirus latent replication

During latent infection, latency-associated nuclear antigen (LANA) of Kaposi’s sarcoma-associated herpesvirus (KSHV) plays important roles in episomal persistence and replication. Several host factors are associated with KSHV latent replication. Here, we show that the catalytic subunit of DNA protein kinase (DNA-PKcs), Ku70, and Ku86 bind the N-terminal region of LANA. LANA was phosphorylated by DNA-PK and overexpression of Ku70, but not Ku86, impaired transient replication. The efficiency of transient replication was significantly increased in the HCT116 (Ku86 +/−) cell line, compared to the HCT116 (Ku86 +/+) cell line, suggesting that the DNA-PK/Ku complex negatively regulates KSHV latent replication.     

Thickness sensing of hMSCs on collagen gel directs stem cell fate

Mechanically compliant substrate provides crucial biomechanical cues for multipotent stem cells to regulate cellular fates such as differentiation, proliferation and maintenance of their phenotype. Effective modulus of which cells sense is not only determined by intrinsic mechanical properties of the substrate, but also the thickness of substrate. From our study, it was found that interference from underlying rigid support at hundreds of microns away could induce significant cellular response. Human mesenchymal stem cells (hMSCs) were cultured on compliant biological gel, collagen type I, of different thickness but identical ECM composition and local stiffness. The cells sensed the thin gel (130 μm) as having a higher effective modulus than the thick gel (1440 μm) and this was reflected in their changes in morphology, actin fibers structure, proliferation and tissue specific gene expression. Commitment into neuronal lineage was observed on the thin gel only. Conversely, the thick gel (1440 μm) was found to act like a substrate with lower effective modulus that inhibited actin fiber polymerization. Stem cells on the thick substrate did not express tissue specific genes and remained at their quiescent state. This study highlighted the need to consider not only the local modulus but also the thickness of biopolymer gel coating during modulation of cellular responses.